The load addresses for the bootcmd_legacy script were taken from the original bootloader from Buffalo. But newer kernels are too big and the uncompressing will overwrite parts of the initial ramdisk. Therefore, we switch to the load addresses which are also used by the other boot script.

Signed-off-by: Michael Walle michael@walle.cc --- include/configs/lsxl.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index a14bfe3..6c8e369 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -127,9 +127,9 @@ "ramdisk_addr=0x01000000\0" \ "fdt_addr=0x01ff0000\0" \ "bootcmd_legacy=ide reset " \ - "&& load ide ${hdpart} 0x00100000 /uImage.buffalo " \ - "&& load ide ${hdpart} 0x00800000 /initrd.buffalo " \ - "&& bootm 0x00100000 0x00800000\0" \ + "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ + "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ + "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ "bootcmd_net=bootp ${kernel_addr} uImage " \ "&& tftpboot ${ramdisk_addr} uInitrd " \ "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \

Use the bootz command to load zImages in case of any new boot scripts. Only the legacy one will still use bootm. Apart form the fact, that this will simplify the image generation process, it saves one copy of the kernel image: Common practice is to generate an uImage with a loading address of 0x8000. This uImage contains a compressed zImage, which will unpack the kernel image to the beginning of the RAM. But because there is already the compressed image the uncompressor first relocates the compressed image to a higher location. The load address is encoded into the uImage which is generated by the distributions and thus cannot be easily changed. By using the bootz command we can load the compressed image to a higher memory address and the decompressor doesn't have to reloacte the image.

Signed-off-by: Michael Walle michael@walle.cc --- include/configs/lsxl.h | 34 +++++++++++++++++++++------------- 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index dff9025..c354c29 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -56,6 +56,7 @@ * Commands configuration */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_ENV @@ -78,6 +79,9 @@ */ #include "mv-common.h"

+/* loading initramfs images without uimage header */ +#define CONFIG_SUPPORT_RAW_INITRD + /* ST M25P40 */ #undef CONFIG_SPI_FLASH_MACRONIX #define CONFIG_SPI_FLASH_STMICRO @@ -130,22 +134,26 @@ "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "bootcmd_net=bootp ${kernel_addr} uImage " \ - "&& tftpboot ${ramdisk_addr} uInitrd " \ + "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ + "&& tftpboot ${ramdisk_addr} initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ - "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_hdd=ide reset " \ - "&& load ide ${hdpart} ${kernel_addr} /uImage " \ - "&& load ide ${hdpart} ${ramdisk_addr} /uInitrd " \ - "&& load ide ${hdpart} ${fdt_addr} " \ - "/" CONFIG_FDTFILE " " \ - "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ + "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ + "&& load ide ${hdpart} ${fdt_addr} /dtb " \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_usb=usb start " \ - "&& load usb 0:1 ${kernel_addr} /uImage " \ - "&& load usb 0:1 ${ramdisk_addr} /uInitrd " \ - "&& load usb 0:1 ${fdt_addr} " \ - "/" CONFIG_FDTFILE " " \ - "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ + "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ + "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ "eraseenv=sf probe 0 " \ "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \