Hi, Benoit,

On Tuesday, May 21, 2013 11:03:01 AM, Alison Wang wrote:

MVF600TWR is a board based on Vybrid MVF600 SoC.

This patch adds basic support for Vybrid MVF600TWR board.

Signed-off-by: Alison Wang b18965@freescale.com Signed-off-by: Jason Jin Jason.jin@freescale.com Signed-off-by: TsiChung Liew tsicliew@gmail.com

[...]

diff --git a/include/configs/mvf600twr.h b/include/configs/mvf600twr.h new file mode 100644 index 0000000..1cfb9f6 --- /dev/null +++ b/include/configs/mvf600twr.h @@ -0,0 +1,140 @@ +/*

• • Copyright 2013 Freescale Semiconductor, Inc.
• • Configuration settings for the Freescale Vybrid mvf600twr board.
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License as
• • published by the Free Software Foundation; either version 2 of
• • the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 59 Temple Place, Suite 330, Boston,
• • MA 02111-1307 USA
• */

+#ifndef __CONFIG_H +#define __CONFIG_H

+#include <asm/arch/imx-regs.h> +#include <config_cmd_default.h>

+#define CONFIG_MVF600

[...]

+#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "FEC"

You don't need to define this one with only 1 Ethernet interface defined. But isn't the MVF600 a dual-Ethernet SoC? [Alison Wang] Yes, MVF600 is a dual-Ethernet SoC. I will change it to "FEC0".

+#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL

+#define CONFIG_BOOTDELAY 3

+#define CONFIG_SYS_TEXT_BASE 0x3f008000

+/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Vybrid U-Boot > " +#undef CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \

•                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  

+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

+#define CONFIG_SYS_MEMTEST_START 0x80010000 +#define CONFIG_SYS_MEMTEST_END 0x87C00000

You now have to #define CONFIG_CMD_MEMTEST for those to be useful. [Alison Wang] OK. Thanks.

+#define CONFIG_SYS_LOAD_ADDR 0x80010000

+#define CONFIG_SYS_HZ 1000

+/*

• • Stack sizes
• • The stack sizes are set up in start.S using the settings below
• */

+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */

+/* Physical memory map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM (0x80000000) +#define PHYS_SDRAM_SIZE (128 * 1024 * 1024)

+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

+#define CONFIG_SYS_INIT_SP_OFFSET \

• (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  

+#define CONFIG_SYS_INIT_SP_ADDR \

• (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  

+/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH

+#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_IS_IN_MMC

+#define CONFIG_ENV_OFFSET (12 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0

+#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ

+#endif

1.8.0

Best regards, Alison Wang