Thus far, the socfpga init code had hard-coded the configuration of the ethernet PHY interface to RGMII in the ethernet registers in sysmgr space, so PHYs connected in another modes did not work.

This patch fixes support for configurations where the ethernet PHYs are connected over MII/GMII/RMII interfaces by parsing the phy-mode OF property of the GMACs and configuring the ethernet registers in sysmgr space accordingly.

Signed-off-by: Marek Vasut marex@denx.de Reported-by: Denis Bakhvalov denis.bakhvalov@nokia.com Cc: Dinh Nguyen dinguyen@opensource.altera.com --- arch/arm/mach-socfpga/misc.c | 39 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c index ce3ff0a..5f988e3 100644 --- a/arch/arm/mach-socfpga/misc.c +++ b/arch/arm/mach-socfpga/misc.c @@ -77,7 +77,8 @@ void v7_outer_cache_disable(void) * DesignWare Ethernet initialization */ #ifdef CONFIG_ETH_DESIGNWARE -static void dwmac_deassert_reset(const unsigned int of_reset_id) +static void dwmac_deassert_reset(const unsigned int of_reset_id, + const u32 phymode) { u32 physhift, reset;

@@ -98,16 +99,41 @@ static void dwmac_deassert_reset(const unsigned int of_reset_id)

/* configure to PHY interface select choosed */ setbits_le32(&sysmgr_regs->emacgrp_ctrl, - SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII << physhift); + phymode << physhift);

/* Release the EMAC controller from reset */ socfpga_per_reset(reset, 0); }

+static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg) +{ + if (!phymode) + return -EINVAL; + + if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) { + *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; + return 0; + } + + if (!strcmp(phymode, "rgmii")) { + *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII; + return 0; + } + + if (!strcmp(phymode, "rmii")) { + *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII; + return 0; + } + + return -EINVAL; +} + static int socfpga_eth_reset(void) { const void *fdt = gd->fdt_blob; struct fdtdec_phandle_args args; + const char *phy_mode; + u32 phy_modereg; int nodes[2]; /* Max. two GMACs */ int ret, count; int i, node; @@ -132,7 +158,14 @@ static int socfpga_eth_reset(void) continue; }

- dwmac_deassert_reset(args.args[0]); + phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL); + ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg); + if (ret) { + debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i); + continue; + } + + dwmac_deassert_reset(args.args[0], phy_modereg); }

return 0;