[U-Boot-Users] [Patch] MCF5282 without preloader
This patch adds the MCF5282 support and includes the Zachary P. Landau fec and immap fixes as patch.
CHANGELOG:
* Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add MCF5282 support (without preloader) relocate ichache_State to ram u-boot can run from internal flash
THX to Zachary P. Landau and Wolfgang Denk for help and inspirations.
Best regards
Jens Scharsig
* Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add MCF5282 support (without preloader) relocate ichache_State to ram u-boot can run from internal flash
In message 42F75DFA.80002@bus-elektronik.de you wrote:
This patch adds the MCF5282 support and includes the Zachary P. Landau fec and immap fixes as patch.
CHANGELOG:
- Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add MCF5282 support (without preloader) relocate ichache_State to ram u-boot can run from internal flash
Merged. Thanks.
Best regards,
Wolfgang Denk
Hi, I'm using the 82545GM gigabit controller which a lead free component on a board very similar to ecotea(ppc 440 gx). We used the 82545EM earlier which is the leaded version of the same. I have tried running it with the latest U-boot too, and it doesn't send out bootp request.
What i found is that the "e1000_transmit" method times out. looks like it doesn't get an ACK to indicate the write to the tx register was succesful. I also used ethereal to see if the packets were making on to the wire, and they weren't.
Has anyone else also run into this ? how did you get it to work ? Can any resident expert shed some light. Any pointer would really be appreciated. Thanks ! kunal
participants (3)
-
Jens Scharsig -
k bisla -
Wolfgang Denk