[PATCH] ARM: stm32: Enable KSZ90x1 PHY driver on DHCOR
Enable KSZ9x01 PHY driver in DHCOR common configuration, since the AV96 board has this PHY populated on the PCB.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com --- configs/stm32mp15_dhcor_basic_defconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 18aaf94dc4b..27d6021960c 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -108,6 +108,8 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_DWC_ETH_QOS=y CONFIG_PHY=y
Hi Marek
On 11/13/21 3:28 AM, Marek Vasut wrote:
Enable KSZ9x01 PHY driver in DHCOR common configuration, since the AV96 board has this PHY populated on the PCB.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcor_basic_defconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 18aaf94dc4b..27d6021960c 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -108,6 +108,8 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_DWC_ETH_QOS=y CONFIG_PHY=y
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com Thanks Patrice
Hi Marek,
On 11/13/21 3:28 AM, Marek Vasut wrote:
Enable KSZ9x01 PHY driver in DHCOR common configuration, since the AV96 board has this PHY populated on the PCB.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcor_basic_defconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 18aaf94dc4b..27d6021960c 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -108,6 +108,8 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_DWC_ETH_QOS=y CONFIG_PHY=y
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
HI Marek
On 11/15/21 12:31 PM, Patrick DELAUNAY wrote:
Hi Marek,
On 11/13/21 3:28 AM, Marek Vasut wrote:
Enable KSZ9x01 PHY driver in DHCOR common configuration, since the AV96 board has this PHY populated on the PCB.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcor_basic_defconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 18aaf94dc4b..27d6021960c 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -108,6 +108,8 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_DWC_ETH_QOS=y CONFIG_PHY=y
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
Applied to u-boot-stm32/next
Thanks Patrice
participants (3)
-
Marek Vasut -
Patrice CHOTARD -
Patrick DELAUNAY