This patch adds support for Samsung TRATS board

Signed-off-by: HeungJun, Kim riverful.kim@samsung.com Signed-off-by: Kyungmin Park kyungmin.park@samsung.com --- MAINTAINERS | 4 + board/samsung/trats/Makefile | 45 ++ board/samsung/trats/lowlevel_init.S | 50 +++ board/samsung/trats/lowlevel_util.c | 137 ++++++ board/samsung/trats/trats.c | 250 +++++++++++ board/samsung/trats/trats_setup.h | 812 +++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/trats.h | 216 ++++++++++ 8 files changed, 1515 insertions(+), 0 deletions(-) create mode 100644 board/samsung/trats/Makefile create mode 100644 board/samsung/trats/lowlevel_init.S create mode 100644 board/samsung/trats/lowlevel_util.c create mode 100644 board/samsung/trats/trats.c create mode 100644 board/samsung/trats/trats_setup.h create mode 100644 include/configs/trats.h

diff --git a/MAINTAINERS b/MAINTAINERS index a56ca10..b760e7f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -705,6 +705,10 @@ Chander Kashyap k.chander@samsung.com origen ARM ARMV7 (EXYNOS4210 SoC) SMDKV310 ARM ARMV7 (EXYNOS4210 SoC)

+Heungjun Kim riverful.kim@samsung.com + + trats ARM ARMV7 (EXYNOS4210 SoC) + Torsten Koschorrek koschorrek@synertronixx.de scb9328 ARM920T (i.MXL)

diff --git a/board/samsung/trats/Makefile b/board/samsung/trats/Makefile new file mode 100644 index 0000000..77bd4a8 --- /dev/null +++ b/board/samsung/trats/Makefile @@ -0,0 +1,45 @@ +# +# Copyright (C) 2011 Samsung Electronics +# Heungjun Kim riverful.kim@samsung.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := trats.o lowlevel_util.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(SOBJS) $(OBJS) + $(call cmd_link_o_target, $(SOBJS) $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/trats/lowlevel_init.S b/board/samsung/trats/lowlevel_init.S new file mode 100644 index 0000000..9159063 --- /dev/null +++ b/board/samsung/trats/lowlevel_init.S @@ -0,0 +1,50 @@ +/* + * Lowlevel setup for TRATS board based on EXYNOS4210 + * + * Copyright (C) 2011 Samsung Electronics + * Heungjun Kim riverful.kim@samsung.com + * Kyungmin Park kyungmin.park@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include "trats_setup.h" + + .globl pmu_init + .globl uart_init + .globl watchdog_disable + .globl clock_init + .globl pmic_reset + + .globl lowlevel_init +lowlevel_init: + push {lr} + + bl pmic_reset @ PMIC reset + bl clock_init @ Init Clock + bl watchdog_disable @ Disable Watchdog + bl uart_init @ Init UART + bl pmu_init @ Init PMU + + pop {pc} + nop diff --git a/board/samsung/trats/lowlevel_util.c b/board/samsung/trats/lowlevel_util.c new file mode 100644 index 0000000..d67a095 --- /dev/null +++ b/board/samsung/trats/lowlevel_util.c @@ -0,0 +1,137 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * Heungjun Kim riverful.kim@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include "trats_setup.h" + +void pmic_reset(void) +{ + u32 base = EXYNOS4_GPIO_PART2_BASE; + u32 gpio; + + gpio = readl(base + EXYNOS4_GPIO_X2_CON_OFFSET); + gpio &= ~EXYNOS4_GPIO_X2_CON_MASK; + gpio |= EXYNOS4_GPIO_X2_CON_VAL; + writel(EXYNOS4_GPIO_X2_CON_VAL, base + EXYNOS4_GPIO_X2_CON_OFFSET); + + gpio = readl(base + EXYNOS4_GPIO_X2_DAT_OFFSET); + gpio |= EXYNOS4_GPIO_X2_DAT_VAL; + writel(gpio, base + EXYNOS4_GPIO_X2_DAT_OFFSET); +} + +void clock_init(void) +{ + u32 base = EXYNOS4_CLOCK_BASE; + + writel(CLK_SRC_CPU_VAL, base + CLK_SRC_CPU_OFFSET); + writel(CLK_DIV_CPU0_VAL, base + CLK_DIV_CPU0_OFFSET); + writel(CLK_DIV_CPU1_VAL, base + CLK_DIV_CPU1_OFFSET); + writel(CLK_DIV_DMC0_VAL, base + CLK_DIV_DMC0_OFFSET); + writel(CLK_DIV_DMC1_VAL, base + CLK_DIV_DMC1_OFFSET); + + writel(CLK_SRC_TOP0_VAL, base + CLK_SRC_TOP0_OFFSET); + writel(CLK_SRC_FSYS_VAL, base + CLK_SRC_FSYS_OFFSET); + writel(CLK_SRC_PERIL0_VAL, base + CLK_SRC_PERIL0_OFFSET); + + writel(CLK_DIV_LEFTBUS_VAL, base + CLK_DIV_LEFTBUS_OFFSET); + writel(CLK_DIV_RIGHTBUS_VAL, base + CLK_DIV_RIGHTBUS_OFFSET); + writel(CLK_DIV_TOP_VAL, base + CLK_DIV_TOP_OFFSET); + writel(CLK_DIV_FSYS1_VAL, base + CLK_DIV_FSYS1_OFFSET); + writel(CLK_DIV_FSYS2_VAL, base + CLK_DIV_FSYS2_OFFSET); + writel(CLK_DIV_FSYS3_VAL, base + CLK_DIV_FSYS3_OFFSET); + writel(CLK_DIV_PERIL0_VAL, base + CLK_DIV_PERIL0_OFFSET); + + /* PLL Setting */ + writel(PLL_LOCKTIME, base + APLL_LOCK_OFFSET); + writel(PLL_LOCKTIME, base + MPLL_LOCK_OFFSET); + writel(PLL_LOCKTIME, base + EPLL_LOCK_OFFSET); + writel(PLL_LOCKTIME, base + VPLL_LOCK_OFFSET); + writel(APLL_CON1_VAL, base + APLL_CON1_OFFSET); + writel(APLL_CON0_VAL, base + APLL_CON0_OFFSET); + writel(MPLL_CON1_VAL, base + MPLL_CON1_OFFSET); + writel(MPLL_CON0_VAL, base + MPLL_CON0_OFFSET); + writel(EPLL_CON1_VAL, base + EPLL_CON1_OFFSET); + writel(EPLL_CON0_VAL, base + EPLL_CON0_OFFSET); + writel(VPLL_CON1_VAL, base + VPLL_CON1_OFFSET); + writel(VPLL_CON0_VAL, base + VPLL_CON0_OFFSET); + + /* Clock Gating */ + writel(CLK_GATE_IP_CAM_VAL, base + CLK_GATE_IP_CAM_OFFSET); + writel(CLK_GATE_IP_VP_VAL, base + CLK_GATE_IP_VP_OFFSET); + writel(CLK_GATE_IP_MFC_VAL, base + CLK_GATE_IP_MFC_OFFSET); + writel(CLK_GATE_IP_G3D_VAL, base + CLK_GATE_IP_G3D_OFFSET); + writel(CLK_GATE_IP_IMAGE_VAL, base + CLK_GATE_IP_IMAGE_OFFSET); + writel(CLK_GATE_IP_LCD0_VAL, base + CLK_GATE_IP_LCD0_OFFSET); + writel(CLK_GATE_IP_LCD1_VAL, base + CLK_GATE_IP_LCD1_OFFSET); + writel(CLK_GATE_IP_FSYS_VAL, base + CLK_GATE_IP_FSYS_OFFSET); + writel(CLK_GATE_IP_GPS_VAL, base + CLK_GATE_IP_GPS_OFFSET); + writel(CLK_GATE_IP_PERIL_VAL, base + CLK_GATE_IP_PERIL_OFFSET); + writel(CLK_GATE_IP_PERIR_VAL, base + CLK_GATE_IP_PERIR_OFFSET); + writel(CLK_GATE_BLOCK_VAL, base + CLK_GATE_BLOCK_OFFSET); +} + +void watchdog_disable(void) +{ + u32 base = EXYNOS4_WATCHDOG_BASE; + writel(0, base); +} + +void uart_init(void) +{ + u32 base = EXYNOS4_GPIO_PART1_BASE; + + writel(EXYNOS4_GPIO_A0_CON_VAL, base + EXYNOS4_GPIO_A0_CON_OFFSET); + writel(EXYNOS4_GPIO_A1_CON_VAL, base + EXYNOS4_GPIO_A1_CON_OFFSET); + + /* UART_SEL */ + base = EXYNOS4_GPIO_PART2_BASE; + writel(EXYNOS4_GPIO_Y4_CON_VAL, base + EXYNOS4_GPIO_Y4_CON_OFFSET); + writel(EXYNOS4_GPIO_Y4_PUD_VAL, base + EXYNOS4_GPIO_Y4_PUD_OFFSET); + writel(EXYNOS4_GPIO_Y4_DAT_VAL, base + EXYNOS4_GPIO_Y4_DAT_OFFSET); + + base = EXYNOS4_UART_BASE; + base += EXYNOS4_DEFAULT_UART_OFFSET; + writel(ULCON_VAL, base + ULCON_OFFSET); + writel(UCON_VAL, base + UCON_OFFSET); + writel(UFCON_VAL, base + UFCON_OFFSET); + writel(UBRDIV_VAL, base + UBRDIV_OFFSET); + writel(UFRACVAL_VAL, base + UFRACVAL_OFFSET); +} + +void pmu_init(void) +{ + u32 base = EXYNOS4_POWER_BASE; + + /* PS HOLD */ + base += EXYNOS4_PS_HOLD_CON_OFFSET; + writel(EXYNOS4_PS_HOLD_CON_VAL, base); + + /* Set power down */ + base += POWER_DOWN_OFFSET; + writel(0, base + POWER_TV_CONFIGURATION_OFFSET); + writel(0, base + POWER_MFC_CONFIGURATION_OFFSET); + writel(0, base + POWER_G3D_CONFIGURATION_OFFSET); + writel(0, base + POWER_LCD_CONFIGURATION_OFFSET); + writel(0, base + POWER_GPS_CONFIGURATION_OFFSET); +} diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c new file mode 100644 index 0000000..640108d --- /dev/null +++ b/board/samsung/trats/trats.c @@ -0,0 +1,250 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * Heungjun Kim riverful.kim@samsung.com + * Kyungmin Park kyungmin.park@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> +#include <pmic.h> +#include <usb/s3c_udc.h> +#include <asm/arch/cpu.h> +#include <max8998_pmic.h> + +DECLARE_GLOBAL_DATA_PTR; + +unsigned int board_rev; + +#ifdef CONFIG_REVISION_TAG +u32 get_board_rev(void) +{ + return board_rev; +} +#endif + +static void check_hw_revision(void); + +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + check_hw_revision(); + printf("HW Revision:\t0x%x\n", board_rev); + +#if defined(CONFIG_PMIC) + pmic_init(); +#endif + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; +} + +static unsigned int get_hw_revision(void) +{ + struct exynos4_gpio_part1 *gpio; + int hwrev = 0; + int i; + + gpio = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE; + + /* hw_rev[3:0] == GPE1[3:0] */ + for (i = 0; i < 4; i++) { + s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT); + s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE); + } + + udelay(1); + + for (i = 0; i < 4; i++) + hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i); + + debug("hwrev 0x%x\n", hwrev); + + return hwrev; +} + +static void check_hw_revision(void) +{ + int hwrev; + + hwrev = get_hw_revision(); + + board_rev |= hwrev; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + puts("Board:\tTRATS\n"); + return 0; +} +#endif + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + struct exynos4_gpio_part2 *gpio; + int i, err; + + gpio = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE; + + /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */ + s5p_gpio_direction_output(&gpio->k0, 2, 1); + s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE); + + /* + * eMMC GPIO: + * SDR 8-bit@48MHz at MMC0 + * GPK0[0] SD_0_CLK(2) + * GPK0[1] SD_0_CMD(2) + * GPK0[2] SD_0_CDn -> Not used + * GPK0[3:6] SD_0_DATA[0:3](2) + * GPK1[3:6] SD_0_DATA[0:3](3) + * + * DDR 4-bit@26MHz at MMC4 + * GPK0[0] SD_4_CLK(3) + * GPK0[1] SD_4_CMD(3) + * GPK0[2] SD_4_CDn -> Not used + * GPK0[3:6] SD_4_DATA[0:3](3) + * GPK1[3:6] SD_4_DATA[4:7](4) + */ + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + /* GPK0[0:6] special function 2 */ + s5p_gpio_cfg_pin(&gpio->k0, i, 0x2); + /* GPK0[0:6] pull disable */ + s5p_gpio_set_pull(&gpio->k0, i, GPIO_PULL_NONE); + /* GPK0[0:6] drv 4x */ + s5p_gpio_set_drv(&gpio->k0, i, GPIO_DRV_4X); + } + + for (i = 3; i < 7; i++) { + /* GPK1[3:6] special function 3 */ + s5p_gpio_cfg_pin(&gpio->k1, i, 0x3); + /* GPK1[3:6] pull disable */ + s5p_gpio_set_pull(&gpio->k1, i, GPIO_PULL_NONE); + /* GPK1[3:6] drv 4x */ + s5p_gpio_set_drv(&gpio->k1, i, GPIO_DRV_4X); + } + + /* + * MMC device init + * mmc0 : eMMC (8-bit buswidth) + * mmc2 : SD card (4-bit buswidth) + */ + err = s5p_mmc_init(0, 8); + + /* T-flash detect */ + s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf); + s5p_gpio_set_pull(&gpio->x3, 4, GPIO_PULL_UP); + + /* + * Check the T-flash detect pin + * GPX3[4] T-flash detect pin + */ + if (!s5p_gpio_get_value(&gpio->x3, 4)) { + /* + * SD card GPIO: + * GPK2[0] SD_2_CLK(2) + * GPK2[1] SD_2_CMD(2) + * GPK2[2] SD_2_CDn -> Not used + * GPK2[3:6] SD_2_DATA[0:3](2) + */ + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + /* GPK2[0:6] special function 2 */ + s5p_gpio_cfg_pin(&gpio->k2, i, 0x2); + /* GPK2[0:6] pull disable */ + s5p_gpio_set_pull(&gpio->k2, i, GPIO_PULL_NONE); + /* GPK2[0:6] drv 4x */ + s5p_gpio_set_drv(&gpio->k2, i, GPIO_DRV_4X); + } + err = s5p_mmc_init(2, 4); + } + + return err; + +} +#endif + +#ifdef CONFIG_USB_GADGET +static int s5pc210_phy_control(int on) +{ + int ret = 0; + struct pmic *p = get_pmic(); + + if (pmic_probe(p)) + return -1; + + if (on) { + ret |= pmic_set_output(p, + MAX8998_REG_BUCK_ACTIVE_DISCHARGE3, + MAX8998_SAFEOUT1, LDO_ON); + ret |= pmic_set_output(p, MAX8998_REG_ONOFF1, + MAX8998_LDO3, LDO_ON); + ret |= pmic_set_output(p, MAX8998_REG_ONOFF2, + MAX8998_LDO8, LDO_ON); + + } else { + ret |= pmic_set_output(p, MAX8998_REG_ONOFF2, + MAX8998_LDO8, LDO_OFF); + ret |= pmic_set_output(p, MAX8998_REG_ONOFF1, + MAX8998_LDO3, LDO_OFF); + ret |= pmic_set_output(p, + MAX8998_REG_BUCK_ACTIVE_DISCHARGE3, + MAX8998_SAFEOUT1, LDO_OFF); + } + + if (ret) { + puts("MAX8998 LDO setting error!\n"); + return -1; + } + + return 0; +} + +struct s3c_plat_otg_data s5pc210_otg_data = { + .phy_control = s5pc210_phy_control, + .regs_phy = EXYNOS4_USBPHY_BASE, + .regs_otg = EXYNOS4_USBOTG_BASE, + .usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL, + .usb_flags = PHY0_SLEEP, +}; +#endif diff --git a/board/samsung/trats/trats_setup.h b/board/samsung/trats/trats_setup.h new file mode 100644 index 0000000..e51f538 --- /dev/null +++ b/board/samsung/trats/trats_setup.h @@ -0,0 +1,812 @@ +/* + * Machine Specific Values for TRATS board based on EXYNOS4210 + * + * Copyright (C) 2011 Samsung Electronics + * Heungjun Kim riverful.kim@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TRATS_SETUP_H +#define _TRATS_SETUP_H + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> + +/* Offsets of clock registers (sources and dividers) */ +#define CLK_SRC_CPU_OFFSET 0x14200 +#define CLK_DIV_CPU0_OFFSET 0x14500 +#define CLK_DIV_CPU1_OFFSET 0x14504 + +#define CLK_DIV_DMC0_OFFSET 0x10500 +#define CLK_DIV_DMC1_OFFSET 0x10504 + +#define CLK_DIV_LEFTBUS_OFFSET 0x4500 +#define CLK_DIV_RIGHTBUS_OFFSET 0x8500 + +#define CLK_SRC_TOP0_OFFSET 0xC210 +#define CLK_DIV_TOP_OFFSET 0xC510 + +#define CLK_SRC_FSYS_OFFSET 0xC240 +#define CLK_DIV_FSYS1_OFFSET 0xC544 +#define CLK_DIV_FSYS2_OFFSET 0xC548 +#define CLK_DIV_FSYS3_OFFSET 0xC54C + +#define CLK_SRC_PERIL0_OFFSET 0xC250 +#define CLK_DIV_PERIL0_OFFSET 0xC550 + +#define APLL_LOCK_OFFSET 0x14000 +#define MPLL_LOCK_OFFSET 0x14008 +#define APLL_CON0_OFFSET 0x14100 +#define APLL_CON1_OFFSET 0x14104 +#define MPLL_CON0_OFFSET 0x14108 +#define MPLL_CON1_OFFSET 0x1410C + +#define EPLL_LOCK_OFFSET 0xC010 +#define VPLL_LOCK_OFFSET 0xC020 +#define EPLL_CON0_OFFSET 0xC110 +#define EPLL_CON1_OFFSET 0xC114 +#define VPLL_CON0_OFFSET 0xC120 +#define VPLL_CON1_OFFSET 0xC124 + +#define CLK_GATE_IP_CAM_OFFSET 0xC920 +#define CLK_GATE_IP_VP_OFFSET 0xC924 +#define CLK_GATE_IP_MFC_OFFSET 0xC928 +#define CLK_GATE_IP_G3D_OFFSET 0xC92C +#define CLK_GATE_IP_IMAGE_OFFSET 0xC930 +#define CLK_GATE_IP_LCD0_OFFSET 0xC934 +#define CLK_GATE_IP_LCD1_OFFSET 0xC938 +#define CLK_GATE_IP_FSYS_OFFSET 0xC940 +#define CLK_GATE_IP_GPS_OFFSET 0xC94C +#define CLK_GATE_IP_PERIL_OFFSET 0xC950 +#define CLK_GATE_IP_PERIR_OFFSET 0xC960 +#define CLK_GATE_BLOCK_OFFSET 0xC970 + +#define PS_HOLD_CONTROL_OFFSET 0x330C + +#define POWER_DOWN_OFFSET 0x3000 +#define POWER_TV_CONFIGURATION_OFFSET 0xC20 +#define POWER_MFC_CONFIGURATION_OFFSET 0xC40 +#define POWER_G3D_CONFIGURATION_OFFSET 0xC60 +#define POWER_LCD_CONFIGURATION_OFFSET 0xCA0 +#define POWER_GPS_CONFIGURATION_OFFSET 0xCE0 + +/* CLK_SRC_CPU: APLL(1), MPLL(1), CORE(0), HPM(0) */ +#define MUX_HPM_SEL_MOUTAPLL 0x0 +#define MUX_HPM_SEL_SCLKMPLL 0x1 +#define MUX_CORE_SEL_MOUTAPLL 0x0 +#define MUX_CORE_SEL_SCLKMPLL 0x1 +#define MUX_MPLL_SEL_FILPLL 0x0 +#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1 +#define MUX_APLL_SEL_FILPLL 0x0 +#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1 +#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \ + | (MUX_CORE_SEL_MOUTAPLL << 16) \ + | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\ + | (MUX_APLL_SEL_MOUTMPLLFOUT << 0)) + +/* CLK_DIV_CPU0 */ +#define APLL_RATIO 0x0 +#define PCLK_DBG_RATIO 0x1 +#define ATB_RATIO 0x3 +#define PERIPH_RATIO 0x3 +#define COREM1_RATIO 0x7 +#define COREM0_RATIO 0x3 +#define CORE_RATIO 0x0 +#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \ + | (PCLK_DBG_RATIO << 20) \ + | (ATB_RATIO << 16) \ + | (PERIPH_RATIO << 12) \ + | (COREM1_RATIO << 8) \ + | (COREM0_RATIO << 4) \ + | (CORE_RATIO << 0)) + +/* CLK_DIV_CPU1 */ +#define HPM_RATIO 0x0 +#define COPY_RATIO 0x3 +#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO)) + +/* CLK_DIV_DMC0 */ +#define CORE_TIMERS_RATIO 0x1 +#define COPY2_RATIO 0x3 +#define DMCP_RATIO 0x1 +#define DMCD_RATIO 0x1 +#define DMC_RATIO 0x1 +#define DPHY_RATIO 0x1 +#define ACP_PCLK_RATIO 0x1 +#define ACP_RATIO 0x3 +#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \ + | (COPY2_RATIO << 24) \ + | (DMCP_RATIO << 20) \ + | (DMCD_RATIO << 16) \ + | (DMC_RATIO << 12) \ + | (DPHY_RATIO << 8) \ + | (ACP_PCLK_RATIO << 4) \ + | (ACP_RATIO << 0)) + +/* CLK_DIV_DMC1 */ +#define DPM_RATIO 0x1 +#define DVSEM_RATIO 0x1 +#define PWI_RATIO 0x1 +#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \ + | (DVSEM_RATIO << 16) \ + | (PWI_RATIO << 8)) + +/* CLK_SRC_TOP0 */ +#define MUX_ONENAND_SEL_ACLK_133 0x0 +#define MUX_ONENAND_SEL_ACLK_160 0x1 +#define MUX_ACLK_133_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_133_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_160_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_160_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_100_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_100_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_200_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_200_SEL_SCLKAPLL 0x1 +#define MUX_VPLL_SEL_FINPLL 0x0 +#define MUX_VPLL_SEL_FOUTVPLL 0x1 +#define MUX_EPLL_SEL_FINPLL 0x0 +#define MUX_EPLL_SEL_FOUTEPLL 0x1 +#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0 +#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1 +#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_160 << 28) \ + | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \ + | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \ + | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \ + | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \ + | (MUX_VPLL_SEL_FOUTVPLL << 8) \ + | (MUX_EPLL_SEL_FOUTEPLL << 4) \ + | (MUX_ONENAND_1_SEL_MOUTONENAND << 0)) + +/* CLK_DIV_TOP */ +#define ONENAND_RATIO 0x0 +#define ACLK_133_RATIO 0x5 +#define ACLK_160_RATIO 0x4 +#define ACLK_100_RATIO 0x7 +#define ACLK_200_RATIO 0x3 +#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \ + | (ACLK_133_RATIO << 12)\ + | (ACLK_160_RATIO << 8) \ + | (ACLK_100_RATIO << 4) \ + | (ACLK_200_RATIO << 0)) + +/* CLK_DIV_LEFTBUS */ +#define GPL_RATIO 0x1 +#define GDL_RATIO 0x3 +#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO)) + +/* CLK_DIV_RIGHTBUS */ +#define GPR_RATIO 0x1 +#define GDR_RATIO 0x3 +#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO)) + +/* CLK_SRS_FSYS: 6 = SCLKMPLL */ +#define SATA_SEL_SCLKMPLL 0 +#define SATA_SEL_SCLKAPLL 1 + +#define MMC_SEL_XXTI 0 +#define MMC_SEL_XUSBXTI 1 +#define MMC_SEL_SCLK_HDMI24M 2 +#define MMC_SEL_SCLK_USBPHY0 3 +#define MMC_SEL_SCLK_USBPHY1 4 +#define MMC_SEL_SCLK_HDMIPHY 5 +#define MMC_SEL_SCLKMPLL 6 +#define MMC_SEL_SCLKEPLL 7 +#define MMC_SEL_SCLKVPLL 8 + +#define MMCC0_SEL MMC_SEL_SCLKMPLL +#define MMCC1_SEL MMC_SEL_SCLKMPLL +#define MMCC2_SEL MMC_SEL_SCLKMPLL +#define MMCC3_SEL MMC_SEL_SCLKMPLL +#define MMCC4_SEL MMC_SEL_SCLKMPLL +#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \ + | (MMCC4_SEL << 16) \ + | (MMCC3_SEL << 12) \ + | (MMCC2_SEL << 8) \ + | (MMCC1_SEL << 4) \ + | (MMCC0_SEL << 0)) + +/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */ +/* CLK_DIV_FSYS1: 800(MPLL) / (15 + 1) */ +#define MMC0_RATIO 0xF +#define MMC0_PRE_RATIO 0x0 +#define MMC1_RATIO 0xF +#define MMC1_PRE_RATIO 0x0 +#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \ + | (MMC1_RATIO << 16) \ + | (MMC0_PRE_RATIO << 8) \ + | (MMC0_RATIO << 0)) + +/* CLK_DIV_FSYS2: 800(MPLL) / (15 + 1) */ +#define MMC2_RATIO 0xF +#define MMC2_PRE_RATIO 0x0 +#define MMC3_RATIO 0xF +#define MMC3_PRE_RATIO 0x0 +#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \ + | (MMC3_RATIO << 16) \ + | (MMC2_PRE_RATIO << 8) \ + | (MMC2_RATIO << 0)) + +/* CLK_DIV_FSYS3: 800(MPLL) / (15 + 1) */ +#define MMC4_RATIO 0xF +#define MMC4_PRE_RATIO 0x0 +#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \ + | (MMC4_RATIO << 0)) + +/* CLK_SRC_PERIL0 */ +#define UART_SEL_XXTI 0 +#define UART_SEL_XUSBXTI 1 +#define UART_SEL_SCLK_HDMI24M 2 +#define UART_SEL_SCLK_USBPHY0 3 +#define UART_SEL_SCLK_USBPHY1 4 +#define UART_SEL_SCLK_HDMIPHY 5 +#define UART_SEL_SCLKMPLL 6 +#define UART_SEL_SCLKEPLL 7 +#define UART_SEL_SCLKVPLL 8 + +#define UART0_SEL UART_SEL_SCLKMPLL +#define UART1_SEL UART_SEL_SCLKMPLL +#define UART2_SEL UART_SEL_SCLKMPLL +#define UART3_SEL UART_SEL_SCLKMPLL +#define UART4_SEL UART_SEL_SCLKMPLL +#define UART5_SEL UART_SEL_SCLKMPLL +#define CLK_SRC_PERIL0_VAL ((UART5_SEL << 16) \ + | (UART4_SEL << 12) \ + | (UART3_SEL << 12) \ + | (UART2_SEL << 8) \ + | (UART1_SEL << 4) \ + | (UART0_SEL << 0)) + +/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */ +/* CLK_DIV_PERIL0 */ +#define UART0_RATIO 7 +#define UART1_RATIO 7 +#define UART2_RATIO 7 +#define UART3_RATIO 4 +#define UART4_RATIO 7 +#define UART5_RATIO 7 +#define CLK_DIV_PERIL0_VAL ((UART5_RATIO << 16) \ + | (UART4_RATIO << 12) \ + | (UART3_RATIO << 12) \ + | (UART2_RATIO << 8) \ + | (UART1_RATIO << 4) \ + | (UART0_RATIO << 0)) + +/* Required period to generate a stable clock output */ +/* PLL_LOCK_TIME */ +#define PLL_LOCKTIME 0x1C20 + +/* PLL Values */ +#define DISABLE 0 +#define ENABLE 1 +#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\ + | (mdiv << 16) \ + | (pdiv << 8) \ + | (sdiv << 0)) + +/* APLL_CON0: 800MHz */ +#define APLL_MDIV 0xC8 +#define APLL_PDIV 0x6 +#define APLL_SDIV 0x1 +#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV) + +/* APLL_CON1 */ +#define APLL_AFC_ENB 0x1 +#define APLL_AFC 0x1C +#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0)) + +/* MPLL_CON0: 800MHz */ +#define MPLL_MDIV 0xC8 +#define MPLL_PDIV 0x6 +#define MPLL_SDIV 0x1 +#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV) + +/* MPLL_CON1 */ +#define MPLL_AFC_ENB 0x1 +#define MPLL_AFC 0x1C +#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0)) + +/* EPLL_CON0: 96MHz */ +#define EPLL_MDIV 0x30 +#define EPLL_PDIV 0x3 +#define EPLL_SDIV 0x2 +#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV) + +/* EPLL_CON1 */ +#define EPLL_K 0x0 +#define EPLL_CON1_VAL (EPLL_K >> 0) + +/* VPLL_CON0: 108MHz */ +#define VPLL_MDIV 0x35 +#define VPLL_PDIV 0x3 +#define VPLL_SDIV 0x2 +#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV) + +/* VPLL_CON1 */ +#define VPLL_SSCG_EN DISABLE +#define VPLL_SEL_PF_DN_SPREAD 0x0 +#define VPLL_MRR 0x11 +#define VPLL_MFR 0x0 +#define VPLL_K 0x400 +#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\ + | (VPLL_SEL_PF_DN_SPREAD << 29) \ + | (VPLL_MRR << 24) \ + | (VPLL_MFR << 16) \ + | (VPLL_K << 0)) + +/* + * CLOCK GATE + * + * GATE CAM : All block + * GATE VP : All block + * GATE MFC : All block + * GATE G3D : All block + * GATE IMAGE : All block + * GATE LCD0 : All block + * GATE LCD1 : All block + * GATE FSYS : Enable - PDMA0,1, SDMMC0,2, USBHOST, USBDEVICE, PPMUFILE + * GATE GPS : All block + * GATE PERI Left : All Enable, Block - SLIMBUS, SPDIF, AC97 + * GATE PERI Right : All Enable, Block - KEYIF + * GATE Block : All block + */ +#define CLK_EN 0x0 +#define CLK_DIS 0x1 + +#define BIT_CAM_CLK_PIXELASYNCM1 18 +#define BIT_CAM_CLK_PIXELASYNCM0 17 +#define BIT_CAM_CLK_PPMUCAMIF 16 +#define BIT_CAM_CLK_QEFIMC3 15 +#define BIT_CAM_CLK_QEFIMC2 14 +#define BIT_CAM_CLK_QEFIMC1 13 +#define BIT_CAM_CLK_QEFIMC0 12 +#define BIT_CAM_CLK_SMMUJPEG 11 +#define BIT_CAM_CLK_SMMUFIMC3 10 +#define BIT_CAM_CLK_SMMUFIMC2 9 +#define BIT_CAM_CLK_SMMUFIMC1 8 +#define BIT_CAM_CLK_SMMUFIMC0 7 +#define BIT_CAM_CLK_JPEG 6 +#define BIT_CAM_CLK_CSIS1 5 +#define BIT_CAM_CLK_CSIS0 4 +#define BIT_CAM_CLK_FIMC3 3 +#define BIT_CAM_CLK_FIMC2 2 +#define BIT_CAM_CLK_FIMC1 1 +#define BIT_CAM_CLK_FIMC0 0 +#define CLK_GATE_IP_CAM_VAL ~((CLK_DIS << BIT_CAM_CLK_PIXELASYNCM1)\ + | (CLK_DIS << BIT_CAM_CLK_PIXELASYNCM0)\ + | (CLK_DIS << BIT_CAM_CLK_PPMUCAMIF)\ + | (CLK_DIS << BIT_CAM_CLK_QEFIMC3)\ + | (CLK_DIS << BIT_CAM_CLK_QEFIMC2)\ + | (CLK_DIS << BIT_CAM_CLK_QEFIMC1)\ + | (CLK_DIS << BIT_CAM_CLK_QEFIMC0)\ + | (CLK_DIS << BIT_CAM_CLK_SMMUJPEG)\ + | (CLK_DIS << BIT_CAM_CLK_SMMUFIMC3)\ + | (CLK_DIS << BIT_CAM_CLK_SMMUFIMC2)\ + | (CLK_DIS << BIT_CAM_CLK_SMMUFIMC1)\ + | (CLK_DIS << BIT_CAM_CLK_SMMUFIMC0)\ + | (CLK_DIS << BIT_CAM_CLK_JPEG)\ + | (CLK_DIS << BIT_CAM_CLK_CSIS1)\ + | (CLK_DIS << BIT_CAM_CLK_CSIS0)\ + | (CLK_DIS << BIT_CAM_CLK_FIMC3)\ + | (CLK_DIS << BIT_CAM_CLK_FIMC2)\ + | (CLK_DIS << BIT_CAM_CLK_FIMC1)\ + | (CLK_DIS << BIT_CAM_CLK_FIMC0)) + +#define BIT_VP_CLK_PPMUTV 5 +#define BIT_VP_CLK_SMMUTV 4 +#define BIT_VP_CLK_HDMI 3 +#define BIT_VP_CLK_TVENC 2 +#define BIT_VP_CLK_MIXER 1 +#define BIT_VP_CLK_VP 0 +#define CLK_GATE_IP_VP_VAL ~((CLK_DIS << BIT_VP_CLK_PPMUTV)\ + | (CLK_DIS << BIT_VP_CLK_SMMUTV)\ + | (CLK_DIS << BIT_VP_CLK_HDMI)\ + | (CLK_DIS << BIT_VP_CLK_TVENC)\ + | (CLK_DIS << BIT_VP_CLK_MIXER)\ + | (CLK_DIS << BIT_VP_CLK_VP)) + +#define BIT_MFC_CLK_PPMUMFC_R 4 +#define BIT_MFC_CLK_PPMUMFC_L 3 +#define BIT_MFC_CLK_SMMUMFC_R 2 +#define BIT_MFC_CLK_SMMUMFC_L 1 +#define BIT_MFC_CLK_MFC 0 +#define CLK_GATE_IP_MFC_VAL ~((CLK_DIS << BIT_MFC_CLK_PPMUMFC_R)\ + | (CLK_DIS << BIT_MFC_CLK_PPMUMFC_L)\ + | (CLK_DIS << BIT_MFC_CLK_SMMUMFC_R)\ + | (CLK_DIS << BIT_MFC_CLK_SMMUMFC_L)\ + | (CLK_DIS << BIT_MFC_CLK_MFC)) + +#define BIT_G3D_CLK_QEG3D 2 +#define BIT_G3D_CLK_PPMUG3D 1 +#define BIT_G3D_CLK_G3D 0 +#define CLK_GATE_IP_G3D_VAL ~((CLK_DIS << BIT_G3D_CLK_QEG3D)\ + | (CLK_DIS << BIT_G3D_CLK_PPMUG3D)\ + | (CLK_DIS << BIT_G3D_CLK_G3D)) + +#define BIT_IMAGE_CLK_PPMUIMAGE 9 +#define BIT_IMAGE_CLK_QEMDMA 8 +#define BIT_IMAGE_CLK_QEROTATOR 7 +#define BIT_IMAGE_CLK_QEG2D 6 +#define BIT_IMAGE_CLK_SMMUMDMA 5 +#define BIT_IMAGE_CLK_SMMUROTATOR 4 +#define BIT_IMAGE_CLK_SMMUG2D 3 +#define BIT_IMAGE_CLK_MDMA 2 +#define BIT_IMAGE_CLK_ROTATOR 1 +#define BIT_IMAGE_CLK_G2D 0 +#define CLK_GATE_IP_IMAGE_VAL ~((CLK_DIS << BIT_IMAGE_CLK_PPMUIMAGE)\ + | (CLK_DIS << BIT_IMAGE_CLK_QEMDMA)\ + | (CLK_DIS << BIT_IMAGE_CLK_QEROTATOR)\ + | (CLK_DIS << BIT_IMAGE_CLK_QEG2D)\ + | (CLK_DIS << BIT_IMAGE_CLK_SMMUMDMA)\ + | (CLK_DIS << BIT_IMAGE_CLK_SMMUROTATOR)\ + | (CLK_DIS << BIT_IMAGE_CLK_SMMUG2D)\ + | (CLK_DIS << BIT_IMAGE_CLK_MDMA)\ + | (CLK_DIS << BIT_IMAGE_CLK_ROTATOR)\ + | (CLK_DIS << BIT_IMAGE_CLK_G2D)) + +#define BIT_LCD0_CLK_PPMULCD0 5 +#define BIT_LCD0_CLK_SMMUFIMD0 4 +#define BIT_LCD0_CLK_DSIM0 3 +#define BIT_LCD0_CLK_MDNIE0 2 +#define BIT_LCD0_CLK_MIE0 1 +#define BIT_LCD0_CLK_FIMD0 0 +#define CLK_GATE_IP_LCD0_VAL ~((CLK_DIS << BIT_LCD0_CLK_PPMULCD0)\ + | (CLK_DIS << BIT_LCD0_CLK_SMMUFIMD0)\ + | (CLK_DIS << BIT_LCD0_CLK_DSIM0)\ + | (CLK_DIS << BIT_LCD0_CLK_MDNIE0)\ + | (CLK_DIS << BIT_LCD0_CLK_MIE0)\ + | (CLK_DIS << BIT_LCD0_CLK_FIMD0)) + +#define BIT_LCD1_CLK_PPMULCD1 5 +#define BIT_LCD1_CLK_SMMUFIMD1 4 +#define BIT_LCD1_CLK_DSIM1 3 +#define BIT_LCD1_CLK_MDNIE1 2 +#define BIT_LCD1_CLK_MIE1 1 +#define BIT_LCD1_CLK_FIMD1 0 +#define CLK_GATE_IP_LCD1_VAL ~((CLK_DIS << BIT_LCD1_CLK_PPMULCD1)\ + | (CLK_DIS << BIT_LCD1_CLK_SMMUFIMD1)\ + | (CLK_DIS << BIT_LCD1_CLK_DSIM1)\ + | (CLK_DIS << BIT_LCD1_CLK_MDNIE1)\ + | (CLK_DIS << BIT_LCD1_CLK_MIE1)\ + | (CLK_DIS << BIT_LCD1_CLK_FIMD1)) + +#define BIT_FSYS_CLK_SMMUPCIE 18 +#define BIT_FSYS_CLK_PPMUFILE 17 +#define BIT_FSYS_CLK_NFCON 16 +#define BIT_FSYS_CLK_ONENAND 15 +#define BIT_FSYS_CLK_PCIE 14 +#define BIT_FSYS_CLK_USBDEVICE 13 +#define BIT_FSYS_CLK_USBHOST 12 +#define BIT_FSYS_CLK_SROMC 11 +#define BIT_FSYS_CLK_SATA 10 +#define BIT_FSYS_CLK_SDMMC4 9 +#define BIT_FSYS_CLK_SDMMC3 8 +#define BIT_FSYS_CLK_SDMMC2 7 +#define BIT_FSYS_CLK_SDMMC1 6 +#define BIT_FSYS_CLK_SDMMC0 5 +#define BIT_FSYS_CLK_TSI 4 +#define BIT_FSYS_CLK_SATAPHY 3 +#define BIT_FSYS_CLK_PCIEPHY 2 +#define BIT_FSYS_CLK_PDMA1 1 +#define BIT_FSYS_CLK_PDMA0 0 +#define CLK_GATE_IP_FSYS_VAL ~((CLK_DIS << BIT_FSYS_CLK_SMMUPCIE)\ + | (CLK_EN << BIT_FSYS_CLK_PPMUFILE)\ + | (CLK_DIS << BIT_FSYS_CLK_NFCON)\ + | (CLK_DIS << BIT_FSYS_CLK_ONENAND)\ + | (CLK_DIS << BIT_FSYS_CLK_PCIE)\ + | (CLK_EN << BIT_FSYS_CLK_USBDEVICE)\ + | (CLK_EN << BIT_FSYS_CLK_USBHOST)\ + | (CLK_DIS << BIT_FSYS_CLK_SROMC)\ + | (CLK_DIS << BIT_FSYS_CLK_SATA)\ + | (CLK_DIS << BIT_FSYS_CLK_SDMMC4)\ + | (CLK_DIS << BIT_FSYS_CLK_SDMMC3)\ + | (CLK_EN << BIT_FSYS_CLK_SDMMC2)\ + | (CLK_DIS << BIT_FSYS_CLK_SDMMC1)\ + | (CLK_EN << BIT_FSYS_CLK_SDMMC0)\ + | (CLK_DIS << BIT_FSYS_CLK_TSI)\ + | (CLK_DIS << BIT_FSYS_CLK_SATAPHY)\ + | (CLK_DIS << BIT_FSYS_CLK_PCIEPHY)\ + | (CLK_EN << BIT_FSYS_CLK_PDMA1)\ + | (CLK_EN << BIT_FSYS_CLK_PDMA0)) + +#define BIT_GPS_CLK_SMMUGPS 1 +#define BIT_GPS_CLK_GPS 0 +#define CLK_GATE_IP_GPS_VAL ~((CLK_DIS < BIT_GPS_CLK_SMMUGPS)\ + | (CLK_DIS << BIT_GPS_CLK_GPS)) + +#define BIT_PERIL_CLK_MODEMIF 28 +#define BIT_PERIL_CLK_AC97 27 +#define BIT_PERIL_CLK_SPDIF 26 +#define BIT_PERIL_CLK_SLIMBUS 25 +#define BIT_PERIL_CLK_PWM 24 +#define BIT_PERIL_CLK_PCM2 23 +#define BIT_PERIL_CLK_PCM1 22 +#define BIT_PERIL_CLK_I2S2 21 +#define BIT_PERIL_CLK_I2S1 20 +#define BIT_PERIL_CLK_RESERVED0 19 +#define BIT_PERIL_CLK_SPI2 18 +#define BIT_PERIL_CLK_SPI1 17 +#define BIT_PERIL_CLK_SPI0 16 +#define BIT_PERIL_CLK_TSADC 15 +#define BIT_PERIL_CLK_I2CHDMI 14 +#define BIT_PERIL_CLK_I2C7 13 +#define BIT_PERIL_CLK_I2C6 12 +#define BIT_PERIL_CLK_I2C5 11 +#define BIT_PERIL_CLK_I2C4 10 +#define BIT_PERIL_CLK_I2C3 9 +#define BIT_PERIL_CLK_I2C2 8 +#define BIT_PERIL_CLK_I2C1 7 +#define BIT_PERIL_CLK_I2C0 6 +#define BIT_PERIL_CLK_RESERVED1 5 +#define BIT_PERIL_CLK_UART4 4 +#define BIT_PERIL_CLK_UART3 3 +#define BIT_PERIL_CLK_UART2 2 +#define BIT_PERIL_CLK_UART1 1 +#define BIT_PERIL_CLK_UART0 0 +#define CLK_GATE_IP_PERIL_VAL ~((CLK_EN << BIT_PERIL_CLK_MODEMIF)\ + | (CLK_DIS << BIT_PERIL_CLK_AC97)\ + | (CLK_DIS << BIT_PERIL_CLK_SPDIF)\ + | (CLK_DIS << BIT_PERIL_CLK_SLIMBUS)\ + | (CLK_EN << BIT_PERIL_CLK_PWM)\ + | (CLK_EN << BIT_PERIL_CLK_PCM2)\ + | (CLK_EN << BIT_PERIL_CLK_PCM1)\ + | (CLK_EN << BIT_PERIL_CLK_I2S2)\ + | (CLK_EN << BIT_PERIL_CLK_I2S1)\ + | (CLK_EN << BIT_PERIL_CLK_RESERVED0)\ + | (CLK_EN << BIT_PERIL_CLK_SPI2)\ + | (CLK_EN << BIT_PERIL_CLK_SPI1)\ + | (CLK_EN << BIT_PERIL_CLK_SPI0)\ + | (CLK_EN << BIT_PERIL_CLK_TSADC)\ + | (CLK_EN << BIT_PERIL_CLK_I2CHDMI)\ + | (CLK_EN << BIT_PERIL_CLK_I2C7)\ + | (CLK_EN << BIT_PERIL_CLK_I2C6)\ + | (CLK_EN << BIT_PERIL_CLK_I2C5)\ + | (CLK_EN << BIT_PERIL_CLK_I2C4)\ + | (CLK_EN << BIT_PERIL_CLK_I2C3)\ + | (CLK_EN << BIT_PERIL_CLK_I2C2)\ + | (CLK_EN << BIT_PERIL_CLK_I2C1)\ + | (CLK_EN << BIT_PERIL_CLK_I2C0)\ + | (CLK_EN << BIT_PERIL_CLK_RESERVED1)\ + | (CLK_EN << BIT_PERIL_CLK_UART4)\ + | (CLK_EN << BIT_PERIL_CLK_UART3)\ + | (CLK_EN << BIT_PERIL_CLK_UART2)\ + | (CLK_EN << BIT_PERIL_CLK_UART1)\ + | (CLK_EN << BIT_PERIL_CLK_UART0)) + + +#define BIT_PERIR_CLK_TMU_APBIF 17 +#define BIT_PERIR_CLK_KEYIF 16 +#define BIT_PERIR_CLK_RTC 15 +#define BIT_PERIR_CLK_WDT 14 +#define BIT_PERIR_CLK_MCT 13 +#define BIT_PERIR_CLK_SECKEY 12 +#define BIT_PERIR_CLK_HDMI_CEC 11 +#define BIT_PERIR_CLK_TZPC5 10 +#define BIT_PERIR_CLK_TZPC4 9 +#define BIT_PERIR_CLK_TZPC3 8 +#define BIT_PERIR_CLK_TZPC2 7 +#define BIT_PERIR_CLK_TZPC1 6 +#define BIT_PERIR_CLK_TZPC0 5 +#define BIT_PERIR_CLK_CMU_DMCPART 4 +#define BIT_PERIR_CLK_RESERVED 3 +#define BIT_PERIR_CLK_CMU_APBIF 2 +#define BIT_PERIR_CLK_SYSREG 1 +#define BIT_PERIR_CLK_CHIP_ID 0 +#define CLK_GATE_IP_PERIR_VAL ~((CLK_EN << BIT_PERIR_CLK_TMU_APBIF)\ + | (CLK_DIS << BIT_PERIR_CLK_KEYIF)\ + | (CLK_EN << BIT_PERIR_CLK_RTC)\ + | (CLK_EN << BIT_PERIR_CLK_WDT)\ + | (CLK_EN << BIT_PERIR_CLK_MCT)\ + | (CLK_EN << BIT_PERIR_CLK_SECKEY)\ + | (CLK_EN << BIT_PERIR_CLK_HDMI_CEC)\ + | (CLK_EN << BIT_PERIR_CLK_TZPC5)\ + | (CLK_EN << BIT_PERIR_CLK_TZPC4)\ + | (CLK_EN << BIT_PERIR_CLK_TZPC3)\ + | (CLK_EN << BIT_PERIR_CLK_TZPC2)\ + | (CLK_EN << BIT_PERIR_CLK_TZPC1)\ + | (CLK_EN << BIT_PERIR_CLK_TZPC0)\ + | (CLK_EN << BIT_PERIR_CLK_CMU_DMCPART)\ + | (CLK_EN << BIT_PERIR_CLK_RESERVED)\ + | (CLK_EN << BIT_PERIR_CLK_CMU_APBIF)\ + | (CLK_EN << BIT_PERIR_CLK_SYSREG)\ + | (CLK_EN << BIT_PERIR_CLK_CHIP_ID)) + +#define BIT_BLOCK_CLK_GPS 7 +#define BIT_BLOCK_CLK_RESERVED 6 +#define BIT_BLOCK_CLK_LCD1 5 +#define BIT_BLOCK_CLK_LCD0 4 +#define BIT_BLOCK_CLK_G3D 3 +#define BIT_BLOCK_CLK_MFC 2 +#define BIT_BLOCK_CLK_TV 1 +#define BIT_BLOCK_CLK_CAM 0 +#define CLK_GATE_BLOCK_VAL ~((CLK_DIS << BIT_BLOCK_CLK_GPS)\ + | (CLK_DIS << BIT_BLOCK_CLK_RESERVED)\ + | (CLK_DIS << BIT_BLOCK_CLK_LCD1)\ + | (CLK_DIS << BIT_BLOCK_CLK_LCD0)\ + | (CLK_DIS << BIT_BLOCK_CLK_G3D)\ + | (CLK_DIS << BIT_BLOCK_CLK_MFC)\ + | (CLK_DIS << BIT_BLOCK_CLK_TV)\ + | (CLK_DIS << BIT_BLOCK_CLK_CAM)) + +/* GPIO Offsets for UART: GPIO Contol Register */ +#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00 +#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20 +#define EXYNOS4_GPIO_Y4_CON_OFFSET 0x1A0 +#define EXYNOS4_GPIO_Y4_DAT_OFFSET 0x1A4 +#define EXYNOS4_GPIO_Y4_PUD_OFFSET 0x1A8 + +/* GPIO Offsets for PMIC: GPIO Contol & Data Register */ +#define EXYNOS4_GPIO_X2_CON_OFFSET 0xC40 +#define EXYNOS4_GPIO_X2_DAT_OFFSET 0xC44 + +/* GPIO Offsets for PS_HOLD: GPIO Control Register */ +#define EXYNOS4_PS_HOLD_CON_OFFSET 0x330C + +#define SET_GPIO(_v, _n, _m) (_v << (_n * _m)) +#define SET_GPIO_CON(_v, _n) SET_GPIO(_v, _n, 4) +#define SET_GPIO_DAT(_v, _n) SET_GPIO(_v, _n, 1) +#define SET_GPIO_PUD(_v, _n) SET_GPIO(_v, _n, 1) + +/* PMIC Reset pin: GPX2[7] (nPOWER) */ +#define GPIO_BIT_PMIC_RST 7 +#define EXYNOS4_GPIO_X2_CON_MASK SET_GPIO_CON(0xf, GPIO_BIT_PMIC_RST) +#define EXYNOS4_GPIO_X2_CON_VAL SET_GPIO_CON(0x1, GPIO_BIT_PMIC_RST) +#define EXYNOS4_GPIO_X2_DAT_VAL SET_GPIO_DAT(0x1, GPIO_BIT_PMIC_RST) + +/* UART_SEL: GPY4[7] */ +#define GPIO_BIT_UART_SEL 7 +#define EXYNOS4_GPIO_Y4_CON_VAL SET_GPIO_CON(0x1, GPIO_BIT_UART_SEL) +#define EXYNOS4_GPIO_Y4_DAT_VAL SET_GPIO_DAT(0x1, GPIO_BIT_UART_SEL) +#define EXYNOS4_GPIO_Y4_PUD_VAL SET_GPIO_PUD(0xC, GPIO_BIT_UART_SEL) + +/* PS_HOLD: Data Hight, Output En */ +#define BIT_DAT 8 +#define BIT_EN 9 +#define EXYNOS4_PS_HOLD_CON_VAL (0x1 << BIT_DAT | 0x1 << BIT_EN) + +/* + * UART GPIO_A0/GPIO_A1 Control Register Value + * 0x2: UART Function + * GPA1CON[3] = I2C_3_SCL (3), GPA1CON[2] = I2C_3_SDA (3) + */ +#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222 +#define EXYNOS4_GPIO_A1_CON_VAL 0x223322 + +/* UART Register offsets */ +#define ULCON_OFFSET 0x00 +#define UCON_OFFSET 0x04 +#define UFCON_OFFSET 0x08 +#define UBRDIV_OFFSET 0x28 +#define UFRACVAL_OFFSET 0x2C + +/* ULCON: UART Line Control Value 8N1 */ +#define WORD_LEN_5_BIT 0x00 +#define WORD_LEN_6_BIT 0x01 +#define WORD_LEN_7_BIT 0x02 +#define WORD_LEN_8_BIT 0x03 + +#define STOP_BIT_1 0x00 +#define STOP_BIT_2 0x01 + +#define NO_PARITY 0x00 +#define ODD_PARITY 0x4 +#define EVEN_PARITY 0x5 +#define FORCED_PARITY_CHECK_AS_1 0x6 +#define FORCED_PARITY_CHECK_AS_0 0x7 + +#define INFRAMODE_NORMAL 0x00 +#define INFRAMODE_INFRARED 0x01 + +#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \ + | (NO_PARITY << 3) \ + | (STOP_BIT_1 << 2) \ + | (WORD_LEN_8_BIT << 0)) + +/* + * UCON: UART Control Value + * Tx_interrupt Type: Level + * Rx_interrupt Type: Level + * Rx Timeout Enabled: Yes + * Rx-Error Atatus_Int Enable: Yes + * Loop_Back: No + * Break Signal: No + * Transmit mode : Interrupt request/polling + * Receive mode : Interrupt request/polling + */ +#define TX_PULSE_INTERRUPT 0 +#define TX_LEVEL_INTERRUPT 1 +#define RX_PULSE_INTERRUPT 0 +#define RX_LEVEL_INTERRUPT 1 + +#define RX_TIME_OUT ENABLE +#define RX_ERROR_STATE_INT_ENB ENABLE +#define LOOP_BACK DISABLE +#define BREAK_SIGNAL DISABLE + +#define TX_MODE_DISABLED 0X00 +#define TX_MODE_IRQ_OR_POLL 0X01 +#define TX_MODE_DMA 0X02 + +#define RX_MODE_DISABLED 0X00 +#define RX_MODE_IRQ_OR_POLL 0X01 +#define RX_MODE_DMA 0X02 + +#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \ + | (RX_LEVEL_INTERRUPT << 8) \ + | (RX_TIME_OUT << 7) \ + | (RX_ERROR_STATE_INT_ENB << 6) \ + | (LOOP_BACK << 5) \ + | (BREAK_SIGNAL << 4) \ + | (TX_MODE_IRQ_OR_POLL << 2) \ + | (RX_MODE_IRQ_OR_POLL << 0)) + +/* + * UFCON: UART FIFO Control Value + * Tx FIFO Trigger LEVEL: 2 Bytes (001) + * Rx FIFO Trigger LEVEL: 2 Bytes (001) + * Tx Fifo Reset: No + * Rx Fifo Reset: No + * FIFO Enable: Yes + */ +#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00 +#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1 +#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2 +#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3 +#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4 +#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5 +#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6 +#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7 + +#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0 +#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1 +#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2 +#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3 +#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4 +#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5 +#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6 +#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7 + +#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES +#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES +#define TX_FIFO_RESET DISABLE +#define RX_FIFO_RESET DISABLE +#define FIFO_ENABLE ENABLE +#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \ + | (RX_FIFO_TRIGGER_LEVEL << 4) \ + | (TX_FIFO_RESET << 2) \ + | (RX_FIFO_RESET << 1) \ + | (FIFO_ENABLE << 0)) +/* + * Baud Rate Division Value + * 115200 BAUD: + * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1) + * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1) + */ +#define UBRDIV_VAL 0x35 + +/* + * Fractional Part of Baud Rate Divisor: + * 115200 BAUD: + * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10) + * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10) + */ +#define UFRACVAL_VAL 0x4 + +#endif diff --git a/boards.cfg b/boards.cfg index 1e5b3e0..53ebb77 100644 --- a/boards.cfg +++ b/boards.cfg @@ -218,6 +218,7 @@ smdkc100 arm armv7 smdkc100 samsung origen arm armv7 origen samsung exynos s5pc210_universal arm armv7 universal_c210 samsung exynos smdkv310 arm armv7 smdkv310 samsung exynos +trats arm armv7 trats samsung exynos harmony arm armv7 harmony nvidia tegra2 seaboard arm armv7 seaboard nvidia tegra2 ventana arm armv7 ventana nvidia tegra2 diff --git a/include/configs/trats.h b/include/configs/trats.h new file mode 100644 index 0000000..d235745 --- /dev/null +++ b/include/configs/trats.h @@ -0,0 +1,216 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * Heungjun Kim riverful.kim@samsung.com + * + * Configuation settings for the SAMSUNG TRATS (EXYNOS4210) board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ +#define CONFIG_S5P /* which is in a S5P Family */ +#define CONFIG_EXYNOS4210 /* which is in a EXYNOS4210 */ +#define CONFIG_TRATS /* working with TRATS */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Keep L2 Cache Disabled */ +#define CONFIG_SYS_L2CACHE_OFF + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x63300000 + +/* input clock of PLL: TRATS has 24MHz input clock at EXYNOS4210 */ +#define CONFIG_SYS_CLK_FREQ_C210 24000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_CMDLINE_EDITING + +/* MACH_TYPE_TRATS macro will be removed once added to mach-types */ +#define MACH_TYPE_TRATS 3928 +#define CONFIG_MACH_TYPE MACH_TYPE_TRATS + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) + +/* select serial console configuration */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_SERIAL2 /* use SERIAL 2 */ +#define CONFIG_BAUDRATE 115200 +#define EXYNOS4_DEFAULT_UART_OFFSET 0x020000 + +/* MMC */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_S5P_MMC + +/* PWM */ +#define CONFIG_PWM + +/* It should define before config_cmd_default.h */ +#define CONFIG_SYS_NO_FLASH + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_MMC + +#define CONFIG_BOOTDELAY 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_BOOTARGS "Please use defined boot" +#define CONFIG_BOOTCOMMAND "run mmcboot" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" + +#define CONFIG_BOOTBLOCK "10" + +#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}" + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootk=" \ + "run loaduimage; bootm 0x40007FC0\0" \ + "updatemmc=" \ + "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \ + "mmc boot 0 1 1 0\0" \ + "updatebackup=" \ + "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \ + "mmc boot 0 1 1 0\0" \ + "updatebootb=" \ + "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \ + "lpj=lpj=3981312\0" \ + "nfsboot=" \ + "set bootargs root=/dev/nfs rw " \ + "nfsroot=${nfsroot},nolock,tcp " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \ + "; run bootk\0" \ + "ramfsboot=" \ + "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \ + "${console} ${meminfo} " \ + "initrd=0x43000000,8M ramdisk=8192\0" \ + "mmcboot=" \ + "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ + "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ + "run loaduimage; bootm 0x40007FC0\0" \ + "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ + "boottrace=setenv opts initcall_debug; run bootcmd\0" \ + "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ + "verify=n\0" \ + "rootfstype=ext4\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ + "meminfo=crashkernel=32M@0x50000000\0" \ + "nfsroot=/nfsroot/arm\0" \ + "bootblock=" CONFIG_BOOTBLOCK "\0" \ + "mmcdev=0\0" \ + "mmcbootpart=2\0" \ + "mmcrootpart=3\0" \ + "opts=always_resume=1" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "TRATS # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Stack sizes */ +#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */ + +/* TRATS has 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ +#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */ +#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */ +#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */ + +#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET ((32 - 4) << 10)/* 32KiB - 4KiB */ + +#define CONFIG_DOS_PARTITION + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_CACHELINE_SIZE 32 + +#include <asm/arch/gpio.h> +/* + * I2C Settings + */ +#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7) +#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6) + +#define CONFIG_SOFT_I2C +#define CONFIG_SOFT_I2C_READ_REPEATED_START +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS 7 + +#define CONFIG_PMIC +#define CONFIG_PMIC_I2C +#define CONFIG_PMIC_MAX8998 + +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_DUALSPEED + +#endif /* __CONFIG_H */