[PATCH] pci: Add standard PCIe ECAM macros

Lot of PCIe controllers are using ECAM addressing. So add common ECAM macros into U-Boot's pci.h header file which can be suitable for most PCI controller drivers.
Replace custom ECAM address macros in every PCI controller driver by new ECAM macros from U-Boot's pci.h header file.
Similar macros are defined also in Linux kernel. There is a small difference between Linux and these new U-Boot macros.
U-Boot's PCIE_ECAM_OFFSET() takes device and function numbers in separate arguments. Linux's PCIE_ECAM_OFFSET() takes device and function numbers encoded in one argument. The reason is that U-Boot's PCI_DEVFN() macro is different than Linux's PCI_SLOT() macro. So having device and function numbers in separate arguments makes code more straightforward.
Signed-off-by: Pali Rohár pali@kernel.org --- I have tested this patch only with pci-aardvark.c driver. So please properly review this change.
Look into following file to compare macros with Linux: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/incl... --- drivers/pci/pci-aardvark.c | 14 ++------------ drivers/pci/pcie_ecam_generic.c | 6 ++---- drivers/pci/pcie_ecam_synquacer.c | 6 ++---- drivers/pci/pcie_phytium.c | 8 ++------ drivers/pci/pcie_rockchip.c | 13 ++----------- drivers/pci/pcie_xilinx.c | 5 +---- include/pci.h | 26 ++++++++++++++++++++++++++ 7 files changed, 37 insertions(+), 41 deletions(-)
diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c index 9e623b6e617b..407b9fa93da1 100644 --- a/drivers/pci/pci-aardvark.c +++ b/drivers/pci/pci-aardvark.c @@ -165,16 +165,6 @@ #define PCIE_CONFIG_WR_TYPE0 0xa #define PCIE_CONFIG_WR_TYPE1 0xb
-/* PCI_BDF shifts 8bit, so we need extra 4bit shift */ -#define PCIE_BDF(b, d, f) (PCI_BDF(b, d, f) << 4) -#define PCIE_CONF_BUS(bus) (((bus) & 0xff) << 20) -#define PCIE_CONF_DEV(dev) (((dev) & 0x1f) << 15) -#define PCIE_CONF_FUNC(fun) (((fun) & 0x7) << 12) -#define PCIE_CONF_REG(reg) ((reg) & 0xffc) -#define PCIE_CONF_ADDR(bus, devfn, where) \ - (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \ - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where)) - /* PCIe Retries & Timeout definitions */ #define PIO_MAX_RETRIES 1500 #define PIO_WAIT_TIMEOUT 1000 @@ -468,7 +458,7 @@ static int pcie_advk_read_config(const struct udevice *bus, pci_dev_t bdf, advk_writel(pcie, reg, PIO_CTRL);
/* Program the address registers */ - reg = PCIE_BDF(busno, PCI_DEV(bdf), PCI_FUNC(bdf)) | PCIE_CONF_REG(offset); + reg = PCIE_ECAM_OFFSET(busno, PCI_DEV(bdf), PCI_FUNC(bdf), (offset & ~0x3)); advk_writel(pcie, reg, PIO_ADDR_LS); advk_writel(pcie, 0, PIO_ADDR_MS);
@@ -625,7 +615,7 @@ static int pcie_advk_write_config(struct udevice *bus, pci_dev_t bdf, advk_writel(pcie, reg, PIO_CTRL);
/* Program the address registers */ - reg = PCIE_BDF(busno, PCI_DEV(bdf), PCI_FUNC(bdf)) | PCIE_CONF_REG(offset); + reg = PCIE_ECAM_OFFSET(busno, PCI_DEV(bdf), PCI_FUNC(bdf), (offset & ~0x3)); advk_writel(pcie, reg, PIO_ADDR_LS); advk_writel(pcie, 0, PIO_ADDR_MS); dev_dbg(pcie->dev, "\tPIO req. - addr = 0x%08x\n", reg); diff --git a/drivers/pci/pcie_ecam_generic.c b/drivers/pci/pcie_ecam_generic.c index e83e5aff206b..09b6fc1fd5d5 100644 --- a/drivers/pci/pcie_ecam_generic.c +++ b/drivers/pci/pcie_ecam_generic.c @@ -46,10 +46,8 @@ static int pci_generic_ecam_conf_address(const struct udevice *bus, void *addr;
addr = pcie->cfg_base; - addr += (PCI_BUS(bdf) - pcie->first_busno) << 20; - addr += PCI_DEV(bdf) << 15; - addr += PCI_FUNC(bdf) << 12; - addr += offset; + addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf) - pcie->first_busno, + PCI_DEV(bdf), PCI_FUNC(bdf), offset); *paddress = addr;
return 0; diff --git a/drivers/pci/pcie_ecam_synquacer.c b/drivers/pci/pcie_ecam_synquacer.c index c6e7c59f8a64..e3e22891088e 100644 --- a/drivers/pci/pcie_ecam_synquacer.c +++ b/drivers/pci/pcie_ecam_synquacer.c @@ -235,10 +235,8 @@ static int pci_synquacer_ecam_conf_address(const struct udevice *bus, void *addr;
addr = pcie->cfg_base; - addr += (PCI_BUS(bdf) - pcie->first_busno) << 20; - addr += PCI_DEV(bdf) << 15; - addr += PCI_FUNC(bdf) << 12; - addr += offset; + addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf) - pcie->first_busno, + PCI_DEV(bdf), PCI_FUNC(bdf), offset); *paddress = addr;
return 0; diff --git a/drivers/pci/pcie_phytium.c b/drivers/pci/pcie_phytium.c index 752e1703215b..a80727625428 100644 --- a/drivers/pci/pcie_phytium.c +++ b/drivers/pci/pcie_phytium.c @@ -36,9 +36,7 @@ static int phytium_pci_skip_dev(pci_dev_t parent) unsigned short capreg; unsigned char port_type;
- addr += PCI_BUS(parent) << 20; - addr += PCI_DEV(parent) << 15; - addr += PCI_FUNC(parent) << 12; + addr += PCIE_ECAM_OFFSET(PCI_BUS(parent), PCI_DEV(parent), PCI_FUNC(parent), 0);
pos = 0x34; while (1) { @@ -89,9 +87,7 @@ static int pci_phytium_conf_address(const struct udevice *bus, pci_dev_t bdf, bdf_parent = PCI_BDF((bus_no - 1), 0, 0);
addr = pcie->cfg_base; - addr += PCI_BUS(bdf) << 20; - addr += PCI_DEV(bdf) << 15; - addr += PCI_FUNC(bdf) << 12; + addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), 0);
if (bus_no > 0 && dev_no > 0) { if ((readb(addr + PCI_HEADER_TYPE) & 0x7f) != diff --git a/drivers/pci/pcie_rockchip.c b/drivers/pci/pcie_rockchip.c index b0c91c0f430e..67039d2a29f8 100644 --- a/drivers/pci/pcie_rockchip.c +++ b/drivers/pci/pcie_rockchip.c @@ -101,15 +101,6 @@ struct rockchip_pcie { struct phy pcie_phy; };
-static int rockchip_pcie_off_conf(pci_dev_t bdf, uint offset) -{ - unsigned int bus = PCI_BUS(bdf); - unsigned int dev = PCI_DEV(bdf); - unsigned int func = PCI_FUNC(bdf); - - return (bus << 20) | (dev << 15) | (func << 12) | (offset & ~0x3); -} - static int rockchip_pcie_rd_conf(const struct udevice *udev, pci_dev_t bdf, uint offset, ulong *valuep, enum pci_size_t size) @@ -117,7 +108,7 @@ static int rockchip_pcie_rd_conf(const struct udevice *udev, pci_dev_t bdf, struct rockchip_pcie *priv = dev_get_priv(udev); unsigned int bus = PCI_BUS(bdf); unsigned int dev = PCI_DEV(bdf); - int where = rockchip_pcie_off_conf(bdf, offset); + int where = PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), offset & ~0x3); ulong value;
if (bus == priv->first_busno && dev == 0) { @@ -144,7 +135,7 @@ static int rockchip_pcie_wr_conf(struct udevice *udev, pci_dev_t bdf, struct rockchip_pcie *priv = dev_get_priv(udev); unsigned int bus = PCI_BUS(bdf); unsigned int dev = PCI_DEV(bdf); - int where = rockchip_pcie_off_conf(bdf, offset); + int where = PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), offset & ~0x3); ulong old;
if (bus == priv->first_busno && dev == 0) { diff --git a/drivers/pci/pcie_xilinx.c b/drivers/pci/pcie_xilinx.c index ae9a65b0a9e1..eb9ec97b74f3 100644 --- a/drivers/pci/pcie_xilinx.c +++ b/drivers/pci/pcie_xilinx.c @@ -76,10 +76,7 @@ static int pcie_xilinx_config_address(const struct udevice *udev, pci_dev_t bdf, return -ENODEV;
addr = pcie->cfg_base; - addr += bus << 20; - addr += dev << 15; - addr += func << 12; - addr += offset; + addr += PCIE_ECAM_OFFSET(bus, dev, func, offset); *paddress = addr;
return 0; diff --git a/include/pci.h b/include/pci.h index 797f224e2fc4..6c1094d72998 100644 --- a/include/pci.h +++ b/include/pci.h @@ -522,6 +522,32 @@
#include <pci_ids.h>
+/* + * Enhanced Configuration Access Mechanism (ECAM) + * + * See PCI Express Base Specification, Revision 5.0, Version 1.0, + * Section 7.2.2, Table 7-1, p. 677. + */ +#define PCIE_ECAM_BUS_SHIFT 20 /* Bus number */ +#define PCIE_ECAM_DEV_SHIFT 15 /* Device number */ +#define PCIE_ECAM_FUNC_SHIFT 12 /* Function number */ + +#define PCIE_ECAM_BUS_MASK 0xff +#define PCIE_ECAM_DEV_MASK 0x1f +#define PCIE_ECAM_FUNC_MASK 0x7 +#define PCIE_ECAM_REG_MASK 0xfff /* Limit offset to a maximum of 4K */ + +#define PCIE_ECAM_BUS(x) (((x) & PCIE_ECAM_BUS_MASK) << PCIE_ECAM_BUS_SHIFT) +#define PCIE_ECAM_DEV(x) (((x) & PCIE_ECAM_DEV_MASK) << PCIE_ECAM_DEV_SHIFT) +#define PCIE_ECAM_FUNC(x) (((x) & PCIE_ECAM_FUNC_MASK) << PCIE_ECAM_FUNC_SHIFT) +#define PCIE_ECAM_REG(x) ((x) & PCIE_ECAM_REG_MASK) + +#define PCIE_ECAM_OFFSET(bus, dev, func, where) \ + (PCIE_ECAM_BUS(bus) | \ + PCIE_ECAM_DEV(dev) | \ + PCIE_ECAM_FUNC(func) | \ + PCIE_ECAM_REG(where)) + #ifndef __ASSEMBLY__
#include <dm/pci.h>

On 03.11.21 01:01, Pali Rohár wrote:
Lot of PCIe controllers are using ECAM addressing. So add common ECAM macros into U-Boot's pci.h header file which can be suitable for most PCI controller drivers.
Replace custom ECAM address macros in every PCI controller driver by new ECAM macros from U-Boot's pci.h header file.
Similar macros are defined also in Linux kernel. There is a small difference between Linux and these new U-Boot macros.
U-Boot's PCIE_ECAM_OFFSET() takes device and function numbers in separate arguments. Linux's PCIE_ECAM_OFFSET() takes device and function numbers encoded in one argument. The reason is that U-Boot's PCI_DEVFN() macro is different than Linux's PCI_SLOT() macro. So having device and function numbers in separate arguments makes code more straightforward.
Signed-off-by: Pali Rohár pali@kernel.org
I have tested this patch only with pci-aardvark.c driver. So please properly review this change.
Reviewed-by: Stefan Roese sr@denx.de
Thanks, STefan
Look into following file to compare macros with Linux: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/incl...
drivers/pci/pci-aardvark.c | 14 ++------------ drivers/pci/pcie_ecam_generic.c | 6 ++---- drivers/pci/pcie_ecam_synquacer.c | 6 ++---- drivers/pci/pcie_phytium.c | 8 ++------ drivers/pci/pcie_rockchip.c | 13 ++----------- drivers/pci/pcie_xilinx.c | 5 +---- include/pci.h | 26 ++++++++++++++++++++++++++ 7 files changed, 37 insertions(+), 41 deletions(-)
diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c index 9e623b6e617b..407b9fa93da1 100644 --- a/drivers/pci/pci-aardvark.c +++ b/drivers/pci/pci-aardvark.c @@ -165,16 +165,6 @@ #define PCIE_CONFIG_WR_TYPE0 0xa #define PCIE_CONFIG_WR_TYPE1 0xb
-/* PCI_BDF shifts 8bit, so we need extra 4bit shift */ -#define PCIE_BDF(b, d, f) (PCI_BDF(b, d, f) << 4) -#define PCIE_CONF_BUS(bus) (((bus) & 0xff) << 20) -#define PCIE_CONF_DEV(dev) (((dev) & 0x1f) << 15) -#define PCIE_CONF_FUNC(fun) (((fun) & 0x7) << 12) -#define PCIE_CONF_REG(reg) ((reg) & 0xffc) -#define PCIE_CONF_ADDR(bus, devfn, where) \
- (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where))
- /* PCIe Retries & Timeout definitions */ #define PIO_MAX_RETRIES 1500 #define PIO_WAIT_TIMEOUT 1000
@@ -468,7 +458,7 @@ static int pcie_advk_read_config(const struct udevice *bus, pci_dev_t bdf, advk_writel(pcie, reg, PIO_CTRL);
/* Program the address registers */
- reg = PCIE_BDF(busno, PCI_DEV(bdf), PCI_FUNC(bdf)) | PCIE_CONF_REG(offset);
- reg = PCIE_ECAM_OFFSET(busno, PCI_DEV(bdf), PCI_FUNC(bdf), (offset & ~0x3)); advk_writel(pcie, reg, PIO_ADDR_LS); advk_writel(pcie, 0, PIO_ADDR_MS);
@@ -625,7 +615,7 @@ static int pcie_advk_write_config(struct udevice *bus, pci_dev_t bdf, advk_writel(pcie, reg, PIO_CTRL);
/* Program the address registers */
- reg = PCIE_BDF(busno, PCI_DEV(bdf), PCI_FUNC(bdf)) | PCIE_CONF_REG(offset);
- reg = PCIE_ECAM_OFFSET(busno, PCI_DEV(bdf), PCI_FUNC(bdf), (offset & ~0x3)); advk_writel(pcie, reg, PIO_ADDR_LS); advk_writel(pcie, 0, PIO_ADDR_MS); dev_dbg(pcie->dev, "\tPIO req. - addr = 0x%08x\n", reg);
diff --git a/drivers/pci/pcie_ecam_generic.c b/drivers/pci/pcie_ecam_generic.c index e83e5aff206b..09b6fc1fd5d5 100644 --- a/drivers/pci/pcie_ecam_generic.c +++ b/drivers/pci/pcie_ecam_generic.c @@ -46,10 +46,8 @@ static int pci_generic_ecam_conf_address(const struct udevice *bus, void *addr;
addr = pcie->cfg_base;
- addr += (PCI_BUS(bdf) - pcie->first_busno) << 20;
- addr += PCI_DEV(bdf) << 15;
- addr += PCI_FUNC(bdf) << 12;
- addr += offset;
addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf) - pcie->first_busno,
PCI_DEV(bdf), PCI_FUNC(bdf), offset);
*paddress = addr;
return 0;
diff --git a/drivers/pci/pcie_ecam_synquacer.c b/drivers/pci/pcie_ecam_synquacer.c index c6e7c59f8a64..e3e22891088e 100644 --- a/drivers/pci/pcie_ecam_synquacer.c +++ b/drivers/pci/pcie_ecam_synquacer.c @@ -235,10 +235,8 @@ static int pci_synquacer_ecam_conf_address(const struct udevice *bus, void *addr;
addr = pcie->cfg_base;
- addr += (PCI_BUS(bdf) - pcie->first_busno) << 20;
- addr += PCI_DEV(bdf) << 15;
- addr += PCI_FUNC(bdf) << 12;
- addr += offset;
addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf) - pcie->first_busno,
PCI_DEV(bdf), PCI_FUNC(bdf), offset);
*paddress = addr;
return 0;
diff --git a/drivers/pci/pcie_phytium.c b/drivers/pci/pcie_phytium.c index 752e1703215b..a80727625428 100644 --- a/drivers/pci/pcie_phytium.c +++ b/drivers/pci/pcie_phytium.c @@ -36,9 +36,7 @@ static int phytium_pci_skip_dev(pci_dev_t parent) unsigned short capreg; unsigned char port_type;
- addr += PCI_BUS(parent) << 20;
- addr += PCI_DEV(parent) << 15;
- addr += PCI_FUNC(parent) << 12;
addr += PCIE_ECAM_OFFSET(PCI_BUS(parent), PCI_DEV(parent), PCI_FUNC(parent), 0);
pos = 0x34; while (1) {
@@ -89,9 +87,7 @@ static int pci_phytium_conf_address(const struct udevice *bus, pci_dev_t bdf, bdf_parent = PCI_BDF((bus_no - 1), 0, 0);
addr = pcie->cfg_base;
- addr += PCI_BUS(bdf) << 20;
- addr += PCI_DEV(bdf) << 15;
- addr += PCI_FUNC(bdf) << 12;
addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), 0);
if (bus_no > 0 && dev_no > 0) { if ((readb(addr + PCI_HEADER_TYPE) & 0x7f) !=
diff --git a/drivers/pci/pcie_rockchip.c b/drivers/pci/pcie_rockchip.c index b0c91c0f430e..67039d2a29f8 100644 --- a/drivers/pci/pcie_rockchip.c +++ b/drivers/pci/pcie_rockchip.c @@ -101,15 +101,6 @@ struct rockchip_pcie { struct phy pcie_phy; };
-static int rockchip_pcie_off_conf(pci_dev_t bdf, uint offset) -{
- unsigned int bus = PCI_BUS(bdf);
- unsigned int dev = PCI_DEV(bdf);
- unsigned int func = PCI_FUNC(bdf);
- return (bus << 20) | (dev << 15) | (func << 12) | (offset & ~0x3);
-}
- static int rockchip_pcie_rd_conf(const struct udevice *udev, pci_dev_t bdf, uint offset, ulong *valuep, enum pci_size_t size)
@@ -117,7 +108,7 @@ static int rockchip_pcie_rd_conf(const struct udevice *udev, pci_dev_t bdf, struct rockchip_pcie *priv = dev_get_priv(udev); unsigned int bus = PCI_BUS(bdf); unsigned int dev = PCI_DEV(bdf);
- int where = rockchip_pcie_off_conf(bdf, offset);
int where = PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), offset & ~0x3); ulong value;
if (bus == priv->first_busno && dev == 0) {
@@ -144,7 +135,7 @@ static int rockchip_pcie_wr_conf(struct udevice *udev, pci_dev_t bdf, struct rockchip_pcie *priv = dev_get_priv(udev); unsigned int bus = PCI_BUS(bdf); unsigned int dev = PCI_DEV(bdf);
- int where = rockchip_pcie_off_conf(bdf, offset);
int where = PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), offset & ~0x3); ulong old;
if (bus == priv->first_busno && dev == 0) {
diff --git a/drivers/pci/pcie_xilinx.c b/drivers/pci/pcie_xilinx.c index ae9a65b0a9e1..eb9ec97b74f3 100644 --- a/drivers/pci/pcie_xilinx.c +++ b/drivers/pci/pcie_xilinx.c @@ -76,10 +76,7 @@ static int pcie_xilinx_config_address(const struct udevice *udev, pci_dev_t bdf, return -ENODEV;
addr = pcie->cfg_base;
- addr += bus << 20;
- addr += dev << 15;
- addr += func << 12;
- addr += offset;
addr += PCIE_ECAM_OFFSET(bus, dev, func, offset); *paddress = addr;
return 0;
diff --git a/include/pci.h b/include/pci.h index 797f224e2fc4..6c1094d72998 100644 --- a/include/pci.h +++ b/include/pci.h @@ -522,6 +522,32 @@
#include <pci_ids.h>
+/*
- Enhanced Configuration Access Mechanism (ECAM)
- See PCI Express Base Specification, Revision 5.0, Version 1.0,
- Section 7.2.2, Table 7-1, p. 677.
- */
+#define PCIE_ECAM_BUS_SHIFT 20 /* Bus number */ +#define PCIE_ECAM_DEV_SHIFT 15 /* Device number */ +#define PCIE_ECAM_FUNC_SHIFT 12 /* Function number */
+#define PCIE_ECAM_BUS_MASK 0xff +#define PCIE_ECAM_DEV_MASK 0x1f +#define PCIE_ECAM_FUNC_MASK 0x7 +#define PCIE_ECAM_REG_MASK 0xfff /* Limit offset to a maximum of 4K */
+#define PCIE_ECAM_BUS(x) (((x) & PCIE_ECAM_BUS_MASK) << PCIE_ECAM_BUS_SHIFT) +#define PCIE_ECAM_DEV(x) (((x) & PCIE_ECAM_DEV_MASK) << PCIE_ECAM_DEV_SHIFT) +#define PCIE_ECAM_FUNC(x) (((x) & PCIE_ECAM_FUNC_MASK) << PCIE_ECAM_FUNC_SHIFT) +#define PCIE_ECAM_REG(x) ((x) & PCIE_ECAM_REG_MASK)
+#define PCIE_ECAM_OFFSET(bus, dev, func, where) \
(PCIE_ECAM_BUS(bus) | \
PCIE_ECAM_DEV(dev) | \
PCIE_ECAM_FUNC(func) | \
PCIE_ECAM_REG(where))
#ifndef __ASSEMBLY__
#include <dm/pci.h>
Viele Grüße, Stefan

On Wed, Nov 03, 2021 at 01:01:05AM +0100, Pali Rohár wrote:
Lot of PCIe controllers are using ECAM addressing. So add common ECAM macros into U-Boot's pci.h header file which can be suitable for most PCI controller drivers.
Replace custom ECAM address macros in every PCI controller driver by new ECAM macros from U-Boot's pci.h header file.
Similar macros are defined also in Linux kernel. There is a small difference between Linux and these new U-Boot macros.
U-Boot's PCIE_ECAM_OFFSET() takes device and function numbers in separate arguments. Linux's PCIE_ECAM_OFFSET() takes device and function numbers encoded in one argument. The reason is that U-Boot's PCI_DEVFN() macro is different than Linux's PCI_SLOT() macro. So having device and function numbers in separate arguments makes code more straightforward.
Signed-off-by: Pali Rohár pali@kernel.org Reviewed-by: Stefan Roese sr@denx.de
Applied to u-boot/next, thanks!
participants (3)
-
Pali Rohár
-
Stefan Roese
-
Tom Rini