[RESEND PATCH v3 00/26] x86: video: Speed up the framebuffer

newer
Differences in loading device-tree...

Simon Glass

3 Jul 2020 3 Jul '20

5:12 a.m.

(resent for Bin, rebased to u-boot/next)

Some architectures use a cached framebuffer and flush the cache as needed so that changes are visible. This is supported by U-Boot.

However x86 uses an uncached framebuffer with a 'write-combining' feature to speed up writes. Reads are permitted but they are extremely expensive.

Unfortunately, reading from the frame buffer is quite common, e.g. to scroll it. This makes scrolling very slow.

This series adds a new feature which supports copying modified parts of the frame buffer to the uncached hardware buffer. This speeds up scrolling dramatically on x86 so the extra complexity cost seems worth it.

In an extreme case, the time to print the environment on minnowboard with 1280x1024 and CONFIG_CONSOLE_SCROLL_LINES disabled is reduced significantly, from 13 seconds to 300ms.

Changes in v3: - Drop unnecessary variable

Changes in v2: - Simplify return sequence in vidconsole_memmove() since there is no logging

Simon Glass (26): x86: fsp: Reinit the FPU after FSP meminit console: Add a way to output to serial only video: Show an error when a vidconsole function fails sandbox: video: Allow selection of rotated console video: Split out expression parts into variables video: Adjust rotated console to start at right edge video: Drop unnecessary #ifdef around vid_console_color() video: Add a comment for struct video_uc_platdata video: Add support for copying to a hardware framebuffer video: Set up the copy framebuffer when enabled video: Clear the copy framebuffer when clearing the screen video: Add helpers for vidconsole for the copy framebuffer video: Update normal console to support copy buffer video: Update truetype console to support copy buffer video: Update rotated console to support copy buffer video: Update the copy framebuffer when writing bitmaps video: Add comments to struct sandbox_sdl_plat video: sandbox: Add support for the copy framebuffer video: pci: Set up the copy framebuffer x86: fsp: video: Allocate a frame buffer when needed video: Correctly handle multiple framebuffers x86: video: Support copy framebuffer with probed devices chromebook_samus: Enable the copy framebuffer chromebook_link: Enable the copy framebuffer minnowmax: Enable the copy framebuffer x86: minnowmax: Drop screen resolution to 1024x768

-- 2.27.0.212.ge8ba1cc988-goog

Show replies by date

Simon Glass

3 Jul 3 Jul

5:12 a.m.

New subject: [RESEND PATCH v3 01/26] x86: fsp: Reinit the FPU after FSP meminit

The APL FSP appears to leave the FPU in a bad state in that it has registers in use. This causes an error when the next FPU operation is performed.

Work around this by re-resetting the FPU after calling FSP-M. This allows the freetype console to work correctly.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v1)

arch/x86/cpu/i386/cpu.c | 5 +++++ arch/x86/include/asm/u-boot-x86.h | 8 ++++++++ arch/x86/lib/fsp2/fsp_meminit.c | 1 + 3 files changed, 14 insertions(+)

diff --git a/arch/x86/cpu/i386/cpu.c b/arch/x86/cpu/i386/cpu.c index 435e50edad..d27324cb4e 100644 --- a/arch/x86/cpu/i386/cpu.c +++ b/arch/x86/cpu/i386/cpu.c @@ -363,6 +363,11 @@ static void setup_cpu_features(void) : : "i" (em_rst), "i" (mp_ne_set) : "eax"); }

+void cpu_reinit_fpu(void) +{ + asm ("fninit\n"); +} + static void setup_identity(void) { /* identify CPU via cpuid and store the decoded info into gd->arch */ diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h index 3e5d56d075..bd3f44014c 100644 --- a/arch/x86/include/asm/u-boot-x86.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -43,6 +43,14 @@ int x86_cpu_reinit_f(void); */ int x86_cpu_init_tpl(void);

+/** + * cpu_reinit_fpu() - Reinit the FPU if something is wrong with it + * + * The FSP-M code can leave registers in use in the FPU. This functions reinits + * it so that the FPU can be used safely + */ +void cpu_reinit_fpu(void); + int cpu_init_f(void); void setup_gdt(struct global_data *id, u64 *gdt_addr); /* diff --git a/arch/x86/lib/fsp2/fsp_meminit.c b/arch/x86/lib/fsp2/fsp_meminit.c index 1a758147b0..faf9c29aef 100644 --- a/arch/x86/lib/fsp2/fsp_meminit.c +++ b/arch/x86/lib/fsp2/fsp_meminit.c @@ -85,6 +85,7 @@ int fsp_memory_init(bool s3wake, bool use_spi_flash) func = (fsp_memory_init_func)(hdr->img_base + hdr->fsp_mem_init); ret = func(&upd, &hob); bootstage_accum(BOOTSTAGE_ID_ACCUM_FSP_M); + cpu_reinit_fpu(); if (ret) return log_msg_ret("SDRAM init fail\n", ret);

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 03/26] video: Show an error when a vidconsole function fails

At present these functions fail silently even when debugging, which is not very helpful. Add a way to print a message to the serial output when an error is detected.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/vidconsole-uclass.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/video/vidconsole-uclass.c b/drivers/video/vidconsole-uclass.c index 3f20f70e9a..841cfdaf93 100644 --- a/drivers/video/vidconsole-uclass.c +++ b/drivers/video/vidconsole-uclass.c @@ -9,12 +9,13 @@

#include <common.h> #include <command.h> +#include <console.h> #include <log.h> -#include <linux/ctype.h> #include <dm.h> #include <video.h> #include <video_console.h> #include <video_font.h> /* Bitmap font for code page 437 */ +#include <linux/ctype.h>

/* * Structure to describe a console color @@ -556,16 +557,31 @@ int vidconsole_put_string(struct udevice *dev, const char *str) static void vidconsole_putc(struct stdio_dev *sdev, const char ch) { struct udevice *dev = sdev->priv; + int ret;

- vidconsole_put_char(dev, ch); + ret = vidconsole_put_char(dev, ch); + if (ret) { +#ifdef DEBUG + console_puts_select_stderr(true, "[vc err: putc]"); +#endif + } video_sync(dev->parent, false); }

static void vidconsole_puts(struct stdio_dev *sdev, const char *s) { struct udevice *dev = sdev->priv; + int ret; + + ret = vidconsole_put_string(dev, s); + if (ret) { +#ifdef DEBUG + char str[30];

- vidconsole_put_string(dev, s); + snprintf(str, sizeof(str), "[vc err: puts %d]", ret); + console_puts_select_stderr(true, str); +#endif + } video_sync(dev->parent, false); }

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 04/26] sandbox: video: Allow selection of rotated console

Add a devicetree property to select a rotated console. This uses the same encoding as vidconsole itself: 0=normal; 1=90 degrees clockwise, 2=upside down, 3=90 degrees anticlockwise.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/sandbox_sdl.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/video/sandbox_sdl.c b/drivers/video/sandbox_sdl.c index 20248e6607..c678e728db 100644 --- a/drivers/video/sandbox_sdl.c +++ b/drivers/video/sandbox_sdl.c @@ -53,6 +53,7 @@ static int sandbox_sdl_bind(struct udevice *dev) plat->xres = dev_read_u32_default(dev, "xres", LCD_MAX_WIDTH); plat->yres = dev_read_u32_default(dev, "yres", LCD_MAX_HEIGHT); plat->bpix = dev_read_u32_default(dev, "log2-depth", VIDEO_BPP16); + plat->rot = dev_read_u32_default(dev, "rotate", 0); uc_plat->size = plat->xres * plat->yres * (1 << plat->bpix) / 8; debug("%s: Frame buffer size %x\n", __func__, uc_plat->size);

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 05/26] video: Split out expression parts into variables

The functions in this file do similar things but not always in the same way. To make the code easier to read and compare, use a separate 'linenum' variable in every function. This is then multiplied by the line length to get the offset within the frame buffer to modify. Also use an 'x' variable to hold the pixel position within that line. This is multipled by the pixel size and added to the offset.

Also move the pbytes declaration up a little with the other long lines.

A side effect of splitting out these variables is that they are promoted to int, i.e. a signed type, from the unsigned short used in the vidconsole_priv struct. This would be necessary should any of the variables go negative. At present this can actually happen in console_putc_xy_2(), if the display width is not a multiple of the character size (see next patch).

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/console_rotate.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/video/console_rotate.c b/drivers/video/console_rotate.c index b485255598..8bb05ae02c 100644 --- a/drivers/video/console_rotate.c +++ b/drivers/video/console_rotate.c @@ -59,9 +59,9 @@ static int console_move_rows_1(struct udevice *dev, uint rowdst, uint rowsrc, uint count) { struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent); + int pbytes = VNBYTES(vid_priv->bpix); void *dst; void *src; - int pbytes = VNBYTES(vid_priv->bpix); int j;

dst = vid_priv->fb + vid_priv->line_length - @@ -83,14 +83,15 @@ static int console_putc_xy_1(struct udevice *dev, uint x_frac, uint y, char ch) struct vidconsole_priv *vc_priv = dev_get_uclass_priv(dev); struct udevice *vid = dev->parent; struct video_priv *vid_priv = dev_get_uclass_priv(vid); + uchar *pfont = video_fontdata + (u8)ch * VIDEO_FONT_HEIGHT; int pbytes = VNBYTES(vid_priv->bpix); - int i, col; + int i, col, x, linenum; int mask = 0x80; void *line; - uchar *pfont = video_fontdata + (u8)ch * VIDEO_FONT_HEIGHT;

- line = vid_priv->fb + (VID_TO_PIXEL(x_frac) + 1) * - vid_priv->line_length - (y + 1) * pbytes; + linenum = VID_TO_PIXEL(x_frac) + 1; + x = y + 1; + line = vid_priv->fb + linenum * vid_priv->line_length - x * pbytes; if (x_frac + VID_TO_POS(vc_priv->x_charsize) > vc_priv->xsize_frac) return -EAGAIN;

@@ -204,16 +205,15 @@ static int console_putc_xy_2(struct udevice *dev, uint x_frac, uint y, char ch) struct vidconsole_priv *vc_priv = dev_get_uclass_priv(dev); struct udevice *vid = dev->parent; struct video_priv *vid_priv = dev_get_uclass_priv(vid); - int i, row; + int pbytes = VNBYTES(vid_priv->bpix); + int i, row, x, linenum; void *line;

if (x_frac + VID_TO_POS(vc_priv->x_charsize) > vc_priv->xsize_frac) return -EAGAIN; - - line = vid_priv->fb + (vid_priv->ysize - y - 1) * - vid_priv->line_length + - (vid_priv->xsize - VID_TO_PIXEL(x_frac) - - VIDEO_FONT_WIDTH - 1) * VNBYTES(vid_priv->bpix); + linenum = vid_priv->ysize - y - 1; + x = vid_priv->xsize - VID_TO_PIXEL(x_frac) - VIDEO_FONT_WIDTH - 1; + line = vid_priv->fb + linenum * vid_priv->line_length + x * pbytes;

for (row = 0; row < VIDEO_FONT_HEIGHT; row++) { unsigned int idx = (u8)ch * VIDEO_FONT_HEIGHT + row; @@ -312,9 +312,9 @@ static int console_move_rows_3(struct udevice *dev, uint rowdst, uint rowsrc, uint count) { struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent); + int pbytes = VNBYTES(vid_priv->bpix); void *dst; void *src; - int pbytes = VNBYTES(vid_priv->bpix); int j;

dst = vid_priv->fb + rowdst * VIDEO_FONT_HEIGHT * pbytes; @@ -334,16 +334,16 @@ static int console_putc_xy_3(struct udevice *dev, uint x_frac, uint y, char ch) struct vidconsole_priv *vc_priv = dev_get_uclass_priv(dev); struct udevice *vid = dev->parent; struct video_priv *vid_priv = dev_get_uclass_priv(vid); + uchar *pfont = video_fontdata + (u8)ch * VIDEO_FONT_HEIGHT; int pbytes = VNBYTES(vid_priv->bpix); - int i, col; + int i, col, x; int mask = 0x80; - void *line = vid_priv->fb + - (vid_priv->ysize - VID_TO_PIXEL(x_frac) - 1) * - vid_priv->line_length + y * pbytes; - uchar *pfont = video_fontdata + (u8)ch * VIDEO_FONT_HEIGHT; + void *line;

if (x_frac + VID_TO_POS(vc_priv->x_charsize) > vc_priv->xsize_frac) return -EAGAIN; + x = vid_priv->ysize - VID_TO_PIXEL(x_frac) - 1; + line = vid_priv->fb + x * vid_priv->line_length + y * pbytes;

for (col = 0; col < VIDEO_FONT_HEIGHT; col++) { switch (vid_priv->bpix) {

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 06/26] video: Adjust rotated console to start at right edge

At present when the console is rotated 180 degrees it starts almost a whole character to the left of the right edge (typically 7 pixels with an 8-pixel-wide font). On a display which aligns with the font width, this just wastes space. On a display that does not this can result in x_frac going negative for the final character (the one on the left side) and the overflow -EAGAIN check at the start of the function failing.

Change the function to start at the rightmost pixel to fix these problems.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/console_rotate.c | 2 +- test/dm/video.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/console_rotate.c b/drivers/video/console_rotate.c index 8bb05ae02c..da0ce7b9ce 100644 --- a/drivers/video/console_rotate.c +++ b/drivers/video/console_rotate.c @@ -212,7 +212,7 @@ static int console_putc_xy_2(struct udevice *dev, uint x_frac, uint y, char ch) if (x_frac + VID_TO_POS(vc_priv->x_charsize) > vc_priv->xsize_frac) return -EAGAIN; linenum = vid_priv->ysize - y - 1; - x = vid_priv->xsize - VID_TO_PIXEL(x_frac) - VIDEO_FONT_WIDTH - 1; + x = vid_priv->xsize - VID_TO_PIXEL(x_frac) - 1; line = vid_priv->fb + linenum * vid_priv->line_length + x * pbytes;

for (row = 0; row < VIDEO_FONT_HEIGHT; row++) { diff --git a/test/dm/video.c b/test/dm/video.c index 0664e3f22b..68f5ba44e7 100644 --- a/test/dm/video.c +++ b/test/dm/video.c @@ -251,7 +251,7 @@ DM_TEST(dm_test_video_rotation1, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); /* Test rotated text output through the console uclass */ static int dm_test_video_rotation2(struct unit_test_state *uts) { - ut_assertok(check_vidconsole_output(uts, 2, 785, 446)); + ut_assertok(check_vidconsole_output(uts, 2, 783, 445));

return 0; }

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 07/26] video: Drop unnecessary #ifdef around vid_console_color()

All of the functions in this file only apply if DM_VIDEO is enabled. Drop the #ifdef as it just clutters things up. Add the needed forward declaration.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

include/video_console.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/include/video_console.h b/include/video_console.h index 0936ceaaf1..d3bc063165 100644 --- a/include/video_console.h +++ b/include/video_console.h @@ -8,6 +8,8 @@

#include <video.h>

+struct video_priv; + #define VID_FRAC_DIV 256

#define VID_TO_PIXEL(x) ((x) / VID_FRAC_DIV) @@ -241,8 +243,6 @@ int vidconsole_put_string(struct udevice *dev, const char *str); void vidconsole_position_cursor(struct udevice *dev, unsigned col, unsigned row);

-#ifdef CONFIG_DM_VIDEO - /** * vid_console_color() - convert a color code to a pixel's internal * representation @@ -257,5 +257,3 @@ void vidconsole_position_cursor(struct udevice *dev, unsigned col, u32 vid_console_color(struct video_priv *priv, unsigned int idx);

#endif - -#endif

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 08/26] video: Add a comment for struct video_uc_platdata

Add a few notes to explain the purpose of each member of this struct.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

include/video.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)

diff --git a/include/video.h b/include/video.h index e7c58e86cb..813b5653b0 100644 --- a/include/video.h +++ b/include/video.h @@ -19,6 +19,18 @@

struct udevice;

+/** + * struct video_uc_platdata - uclass platform data for a video device + * + * This holds information that the uclass needs to know about each device. It + * is accessed using dev_get_uclass_platdata(dev). See 'Theory of operation' at + * the top of video-uclass.c for details on how this information is set. + * + * @align: Frame-buffer alignment, indicating the memory boundary the frame + * buffer should start on. If 0, 1MB is assumed + * @size: Frame-buffer size, in bytes + * @base: Base address of frame buffer, 0 if not yet known + */ struct video_uc_platdata { uint align; uint size;

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 09/26] video: Add support for copying to a hardware framebuffer

Some architectures use a cached framebuffer and flush the cache as needed so that changes are visible. This is supported by U-Boot.

However x86 uses an uncached framebuffer with a 'write-combining' feature to speed up writes. Reads are permitted but they are extremely expensive.

Unfortunately, reading from the frame buffer is quite common, e.g. to scroll it. This makes scrolling very slow.

Add a new feature which supports copying modified parts of the frame buffer to the uncached hardware buffer. This speeds up scrolling by at least 10x on x86 so the extra complexity cost seems worth it.

As a starting point, add the Kconfig, update the video structures to keep track of the buffer and add a function to do the copy.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/Kconfig | 12 ++++++++ drivers/video/video-uclass.c | 54 ++++++++++++++++++++++++++++++++++++ include/video.h | 29 +++++++++++++++++++ 3 files changed, 95 insertions(+)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 52f5bc6127..8f0feec6af 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -22,6 +22,18 @@ config BACKLIGHT This provides backlight uclass driver that enables basic panel backlight support.

+config VIDEO_COPY + bool "Enable copying the frame buffer to a hardware copy" + depends on DM_VIDEO + help + On some machines (e.g. x86), reading from the frame buffer is very + slow because it is uncached. To improve performance, this feature + allows the frame buffer to be kept in cached memory (allocated by + U-Boot) and then copied to the hardware frame-buffer as needed. + + To use this, your video driver must set @copy_base in + struct video_uc_platdata. + config BACKLIGHT_PWM bool "Generic PWM based Backlight Driver" depends on BACKLIGHT && DM_PWM diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index 1f2874554a..341db68e38 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -4,6 +4,7 @@ */

#include <common.h> +#include <console.h> #include <cpu_func.h> #include <dm.h> #include <log.h> @@ -201,6 +202,59 @@ int video_get_ysize(struct udevice *dev) return priv->ysize; }

+#ifdef CONFIG_VIDEO_COPY +int video_sync_copy(struct udevice *dev, void *from, void *to) +{ + struct video_priv *priv = dev_get_uclass_priv(dev); + + if (priv->copy_fb) { + long offset, size; + + /* Find the offset of the first byte to copy */ + if ((ulong)to > (ulong)from) { + size = to - from; + offset = from - priv->fb; + } else { + size = from - to; + offset = to - priv->fb; + } + + /* + * Allow a bit of leeway for valid requests somewhere near the + * frame buffer + */ + if (offset < -priv->fb_size || offset > 2 * priv->fb_size) { +#ifdef DEBUG + char str[80]; + + snprintf(str, sizeof(str), + "[sync_copy fb=%p, from=%p, to=%p, offset=%lx]", + priv->fb, from, to, offset); + console_puts_select_stderr(true, str); +#endif + return -EFAULT; + } + + /* + * Silently crop the memcpy. This allows callers to avoid doing + * this themselves. It is common for the end pointer to go a + * few lines after the end of the frame buffer, since most of + * the update algorithms terminate a line after their last write + */ + if (offset + size > priv->fb_size) { + size = priv->fb_size - offset; + } else if (offset < 0) { + size += offset; + offset = 0; + } + + memcpy(priv->copy_fb + offset, priv->fb + offset, size); + } + + return 0; +} +#endif + /* Set up the colour map */ static int video_pre_probe(struct udevice *dev) { diff --git a/include/video.h b/include/video.h index 813b5653b0..1a0ffd8037 100644 --- a/include/video.h +++ b/include/video.h @@ -30,11 +30,14 @@ struct udevice; * buffer should start on. If 0, 1MB is assumed * @size: Frame-buffer size, in bytes * @base: Base address of frame buffer, 0 if not yet known + * @copy_base: Base address of a hardware copy of the frame buffer. See + * CONFIG_VIDEO_COPY. */ struct video_uc_platdata { uint align; uint size; ulong base; + ulong copy_base; };

enum video_polarity { @@ -75,6 +78,8 @@ enum video_log2_bpp { * @font_size: Font size in pixels (0 to use a default value) * @fb: Frame buffer * @fb_size: Frame buffer size + * @copy_fb: Copy of the frame buffer to keep up to date; see struct + * video_uc_platdata * @line_length: Length of each frame buffer line, in bytes. This can be * set by the driver, but if not, the uclass will set it after * probing @@ -101,6 +106,7 @@ struct video_priv { */ void *fb; int fb_size; + void *copy_fb; int line_length; u32 colour_fg; u32 colour_bg; @@ -214,6 +220,29 @@ void video_set_flush_dcache(struct udevice *dev, bool flush); */ void video_set_default_colors(struct udevice *dev, bool invert);

#ifndef CONFIG_DM_VIDEO

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 10/26] video: Set up the copy framebuffer when enabled

This framebuffer is separately mapped. Update the video post-probe function to set this up.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/video-uclass.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index 341db68e38..0c80fd5bfe 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -293,6 +293,9 @@ static int video_post_probe(struct udevice *dev)

priv->fb_size = priv->line_length * priv->ysize;

+ if (IS_ENABLED(CONFIG_VIDEO_COPY) && plat->copy_base) + priv->copy_fb = map_sysmem(plat->copy_base, plat->size); + /* Set up colors */ video_set_default_colors(dev, false);

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 11/26] video: Clear the copy framebuffer when clearing the screen

Update video_clear() to also sync to the copy framebuffer.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/video-uclass.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index 0c80fd5bfe..4ddd8bc1db 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -95,6 +95,7 @@ int video_reserve(ulong *addrp) int video_clear(struct udevice *dev) { struct video_priv *priv = dev_get_uclass_priv(dev); + int ret;

switch (priv->bpix) { case VIDEO_BPP16: @@ -119,6 +120,9 @@ int video_clear(struct udevice *dev) memset(priv->fb, priv->colour_bg, priv->fb_size); break; } + ret = video_sync_copy(dev, priv->fb, priv->fb + priv->fb_size); + if (ret) + return ret;

return 0; }

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 12/26] video: Add helpers for vidconsole for the copy framebuffer

Add a convenience function to call video_sync_copy() for a vidconsole. Also add a memmove() helper, which does the memmove() as well as the sync.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

Changes in v3: - Drop unnecessary variable

Changes in v2: - Simplify return sequence in vidconsole_memmove() since there is no logging

drivers/video/vidconsole-uclass.c | 16 ++++++++++ include/video_console.h | 49 +++++++++++++++++++++++++++++++ 2 files changed, 65 insertions(+)

diff --git a/drivers/video/vidconsole-uclass.c b/drivers/video/vidconsole-uclass.c index 841cfdaf93..3a07f36ce2 100644 --- a/drivers/video/vidconsole-uclass.c +++ b/drivers/video/vidconsole-uclass.c @@ -629,6 +629,22 @@ UCLASS_DRIVER(vidconsole) = { .per_device_auto_alloc_size = sizeof(struct vidconsole_priv), };

+#ifdef CONFIG_VIDEO_COPY +int vidconsole_sync_copy(struct udevice *dev, void *from, void *to) +{ + struct udevice *vid = dev_get_parent(dev); + + return video_sync_copy(vid, from, to); +} + +int vidconsole_memmove(struct udevice *dev, void *dst, const void *src, + int size) +{ + memmove(dst, src, size); + return vidconsole_sync_copy(dev, dst, dst + size); +} +#endif + #if CONFIG_IS_ENABLED(CMD_VIDCONSOLE) void vidconsole_position_cursor(struct udevice *dev, unsigned col, unsigned row) { diff --git a/include/video_console.h b/include/video_console.h index d3bc063165..06b798ef10 100644 --- a/include/video_console.h +++ b/include/video_console.h @@ -256,4 +256,53 @@ void vidconsole_position_cursor(struct udevice *dev, unsigned col, */ u32 vid_console_color(struct video_priv *priv, unsigned int idx);

+#ifdef CONFIG_VIDEO_COPY +/** + * vidconsole_sync_copy() - Sync back to the copy framebuffer + * + * This ensures that the copy framebuffer has the same data as the framebuffer + * for a particular region. It should be called after the framebuffer is updated + * + * @from and @to can be in either order. The region between them is synced. + * + * @dev: Vidconsole device being updated + * @from: Start/end address within the framebuffer (->fb) + * @to: Other address within the frame buffer + * @return 0 if OK, -EFAULT if the start address is before the start of the + * frame buffer start + */ +int vidconsole_sync_copy(struct udevice *dev, void *from, void *to); + +/** + * vidconsole_memmove() - Perform a memmove() within the frame buffer + * + * This handles a memmove(), e.g. for scrolling. It also updates the copy + * framebuffer. + * + * @dev: Vidconsole device being updated + * @dst: Destination address within the framebuffer (->fb) + * @src: Source address within the framebuffer (->fb) + * @size: Number of bytes to transfer + * @return 0 if OK, -EFAULT if the start address is before the start of the + * frame buffer start + */ +int vidconsole_memmove(struct udevice *dev, void *dst, const void *src, + int size); +#else +static inline int vidconsole_sync_copy(struct udevice *dev, void *from, + void *to) +{ + return 0; +} + +static inline int vidconsole_memmove(struct udevice *dev, void *dst, + const void *src, int size) +{ + memmove(dst, src, size); + + return 0; +} + +#endif + #endif

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 13/26] video: Update normal console to support copy buffer

Update the implementation to keep a track of what it changes in the frame buffer and then tell the copy buffer about it. Use the special vidconsole_memmove() helper so that memmove() operations are also reflected in the copy buffer.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/console_normal.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/video/console_normal.c b/drivers/video/console_normal.c index c3f7ef8add..04f022491e 100644 --- a/drivers/video/console_normal.c +++ b/drivers/video/console_normal.c @@ -16,8 +16,9 @@ static int console_normal_set_row(struct udevice *dev, uint row, int clr) { struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent); - void *line; + void *line, *end; int pixels = VIDEO_FONT_HEIGHT * vid_priv->xsize; + int ret; int i;

line = vid_priv->fb + row * VIDEO_FONT_HEIGHT * vid_priv->line_length; @@ -28,6 +29,7 @@ static int console_normal_set_row(struct udevice *dev, uint row, int clr)

for (i = 0; i < pixels; i++) *dst++ = clr; + end = dst; break; } case VIDEO_BPP16: @@ -36,6 +38,7 @@ static int console_normal_set_row(struct udevice *dev, uint row, int clr)

for (i = 0; i < pixels; i++) *dst++ = clr; + end = dst; break; } case VIDEO_BPP32: @@ -44,11 +47,15 @@ static int console_normal_set_row(struct udevice *dev, uint row, int clr)

for (i = 0; i < pixels; i++) *dst++ = clr; + end = dst; break; } default: return -ENOSYS; } + ret = vidconsole_sync_copy(dev, line, end); + if (ret) + return ret;

return 0; } @@ -59,10 +66,15 @@ static int console_normal_move_rows(struct udevice *dev, uint rowdst, struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent); void *dst; void *src; + int size; + int ret;

dst = vid_priv->fb + rowdst * VIDEO_FONT_HEIGHT * vid_priv->line_length; src = vid_priv->fb + rowsrc * VIDEO_FONT_HEIGHT * vid_priv->line_length; - memmove(dst, src, VIDEO_FONT_HEIGHT * vid_priv->line_length * count); + size = VIDEO_FONT_HEIGHT * vid_priv->line_length * count; + ret = vidconsole_memmove(dev, dst, src, size); + if (ret) + return ret;

return 0; } @@ -74,8 +86,13 @@ static int console_normal_putc_xy(struct udevice *dev, uint x_frac, uint y, struct udevice *vid = dev->parent; struct video_priv *vid_priv = dev_get_uclass_priv(vid); int i, row; - void *line = vid_priv->fb + y * vid_priv->line_length + + void *start; + void *line; + int ret; + + start = vid_priv->fb + y * vid_priv->line_length + VID_TO_PIXEL(x_frac) * VNBYTES(vid_priv->bpix); + line = start;

if (x_frac + VID_TO_POS(vc_priv->x_charsize) > vc_priv->xsize_frac) return -EAGAIN; @@ -126,6 +143,9 @@ static int console_normal_putc_xy(struct udevice *dev, uint x_frac, uint y, } line += vid_priv->line_length; } + ret = vidconsole_sync_copy(dev, start, line); + if (ret) + return ret;

return VID_TO_POS(VIDEO_FONT_WIDTH); }

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 14/26] video: Update truetype console to support copy buffer

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/console_truetype.c | 43 +++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 12 deletions(-)

diff --git a/drivers/video/console_truetype.c b/drivers/video/console_truetype.c index 5f7f03904b..22b2ea7191 100644 --- a/drivers/video/console_truetype.c +++ b/drivers/video/console_truetype.c @@ -127,9 +127,9 @@ static int console_truetype_set_row(struct udevice *dev, uint row, int clr) { struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent); struct console_tt_priv *priv = dev_get_priv(dev); - void *line; + void *end, *line; int pixels = priv->font_size * vid_priv->line_length; - int i; + int i, ret;

line = vid_priv->fb + row * priv->font_size * vid_priv->line_length; switch (vid_priv->bpix) { @@ -139,6 +139,7 @@ static int console_truetype_set_row(struct udevice *dev, uint row, int clr)

for (i = 0; i < pixels; i++) *dst++ = clr; + end = dst; break; } #endif @@ -148,6 +149,7 @@ static int console_truetype_set_row(struct udevice *dev, uint row, int clr)

for (i = 0; i < pixels; i++) *dst++ = clr; + end = dst; break; } #endif @@ -157,12 +159,16 @@ static int console_truetype_set_row(struct udevice *dev, uint row, int clr)

for (i = 0; i < pixels; i++) *dst++ = clr; + end = dst; break; } #endif default: return -ENOSYS; } + ret = vidconsole_sync_copy(dev, line, end); + if (ret) + return ret;

return 0; } @@ -174,11 +180,14 @@ static int console_truetype_move_rows(struct udevice *dev, uint rowdst, struct console_tt_priv *priv = dev_get_priv(dev); void *dst; void *src; - int i, diff; + int i, diff, ret;

dst = vid_priv->fb + rowdst * priv->font_size * vid_priv->line_length; src = vid_priv->fb + rowsrc * priv->font_size * vid_priv->line_length; - memmove(dst, src, priv->font_size * vid_priv->line_length * count); + ret = vidconsole_memmove(dev, dst, src, priv->font_size * + vid_priv->line_length * count); + if (ret) + return ret;

/* Scroll up our position history */ diff = (rowsrc - rowdst) * priv->font_size; @@ -203,8 +212,8 @@ static int console_truetype_putc_xy(struct udevice *dev, uint x, uint y, struct pos_info *pos; u8 *bits, *data; int advance; - void *line; - int row; + void *start, *end, *line; + int row, ret;

/* First get some basic metrics about this character */ stbtt_GetCodepointHMetrics(font, ch, &advance, &lsb); @@ -253,11 +262,12 @@ static int console_truetype_putc_xy(struct udevice *dev, uint x, uint y,

/* Figure out where to write the character in the frame buffer */ bits = data; - line = vid_priv->fb + y * vid_priv->line_length + + start = vid_priv->fb + y * vid_priv->line_length + VID_TO_PIXEL(x) * VNBYTES(vid_priv->bpix); linenum = priv->baseline + yoff; if (linenum > 0) - line += linenum * vid_priv->line_length; + start += linenum * vid_priv->line_length; + line = start;

/* * Write a row at a time, converting the 8bpp image into the colour @@ -286,6 +296,7 @@ static int console_truetype_putc_xy(struct udevice *dev, uint x, uint y, *dst++ &= out; bits++; } + end = dst; break; } #endif @@ -307,6 +318,7 @@ static int console_truetype_putc_xy(struct udevice *dev, uint x, uint y, *dst++ &= out; bits++; } + end = dst; break; } #endif @@ -317,6 +329,9 @@ static int console_truetype_putc_xy(struct udevice *dev, uint x, uint y,

line += vid_priv->line_length; } + ret = vidconsole_sync_copy(dev, start, line); + if (ret) + return ret; free(data);

return width_frac; @@ -340,12 +355,13 @@ static int console_truetype_erase(struct udevice *dev, int xstart, int ystart, int xend, int yend, int clr) { struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent); - void *line; + void *start, *line; int pixels = xend - xstart; - int row, i; + int row, i, ret;

- line = vid_priv->fb + ystart * vid_priv->line_length; - line += xstart * VNBYTES(vid_priv->bpix); + start = vid_priv->fb + ystart * vid_priv->line_length; + start += xstart * VNBYTES(vid_priv->bpix); + line = start; for (row = ystart; row < yend; row++) { switch (vid_priv->bpix) { #ifdef CONFIG_VIDEO_BPP8 @@ -380,6 +396,9 @@ static int console_truetype_erase(struct udevice *dev, int xstart, int ystart, } line += vid_priv->line_length; } + ret = vidconsole_sync_copy(dev, start, line); + if (ret) + return ret;

return 0; }

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 15/26] video: Update rotated console to support copy buffer

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/console_rotate.c | 83 ++++++++++++++++++++++++---------- 1 file changed, 60 insertions(+), 23 deletions(-)

diff --git a/drivers/video/console_rotate.c b/drivers/video/console_rotate.c index da0ce7b9ce..36c8d0609d 100644 --- a/drivers/video/console_rotate.c +++ b/drivers/video/console_rotate.c @@ -15,11 +15,13 @@ static int console_set_row_1(struct udevice *dev, uint row, int clr) { struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent); int pbytes = VNBYTES(vid_priv->bpix); - void *line; + void *start, *line; int i, j; + int ret;

- line = vid_priv->fb + vid_priv->line_length - + start = vid_priv->fb + vid_priv->line_length - (row + 1) * VIDEO_FONT_HEIGHT * pbytes; + line = start; for (j = 0; j < vid_priv->ysize; j++) { switch (vid_priv->bpix) { case VIDEO_BPP8: @@ -51,6 +53,9 @@ static int console_set_row_1(struct udevice *dev, uint row, int clr) } line += vid_priv->line_length; } + ret = vidconsole_sync_copy(dev, start, line); + if (ret) + return ret;

return 0; } @@ -62,7 +67,7 @@ static int console_move_rows_1(struct udevice *dev, uint rowdst, uint rowsrc, int pbytes = VNBYTES(vid_priv->bpix); void *dst; void *src; - int j; + int j, ret;

dst = vid_priv->fb + vid_priv->line_length - (rowdst + count) * VIDEO_FONT_HEIGHT * pbytes; @@ -70,7 +75,10 @@ static int console_move_rows_1(struct udevice *dev, uint rowdst, uint rowsrc, (rowsrc + count) * VIDEO_FONT_HEIGHT * pbytes;

for (j = 0; j < vid_priv->ysize; j++) { - memmove(dst, src, VIDEO_FONT_HEIGHT * pbytes * count); + ret = vidconsole_memmove(dev, dst, src, + VIDEO_FONT_HEIGHT * pbytes * count); + if (ret) + return ret; src += vid_priv->line_length; dst += vid_priv->line_length; } @@ -85,13 +93,14 @@ static int console_putc_xy_1(struct udevice *dev, uint x_frac, uint y, char ch) struct video_priv *vid_priv = dev_get_uclass_priv(vid); uchar *pfont = video_fontdata + (u8)ch * VIDEO_FONT_HEIGHT; int pbytes = VNBYTES(vid_priv->bpix); - int i, col, x, linenum; + int i, col, x, linenum, ret; int mask = 0x80; - void *line; + void *start, *line;

linenum = VID_TO_PIXEL(x_frac) + 1; x = y + 1; - line = vid_priv->fb + linenum * vid_priv->line_length - x * pbytes; + start = vid_priv->fb + linenum * vid_priv->line_length - x * pbytes; + line = start; if (x_frac + VID_TO_POS(vc_priv->x_charsize) > vc_priv->xsize_frac) return -EAGAIN;

@@ -136,6 +145,10 @@ static int console_putc_xy_1(struct udevice *dev, uint x_frac, uint y, char ch) line += vid_priv->line_length; mask >>= 1; } + /* We draw backwards from 'start, so account for the first line */ + ret = vidconsole_sync_copy(dev, start - vid_priv->line_length, line); + if (ret) + return ret;

return VID_TO_POS(VIDEO_FONT_WIDTH); } @@ -144,12 +157,13 @@ static int console_putc_xy_1(struct udevice *dev, uint x_frac, uint y, char ch) static int console_set_row_2(struct udevice *dev, uint row, int clr) { struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent); - void *line; + void *start, *line, *end; int pixels = VIDEO_FONT_HEIGHT * vid_priv->xsize; - int i; + int i, ret;

- line = vid_priv->fb + vid_priv->ysize * vid_priv->line_length - + start = vid_priv->fb + vid_priv->ysize * vid_priv->line_length - (row + 1) * VIDEO_FONT_HEIGHT * vid_priv->line_length; + line = start; switch (vid_priv->bpix) { case VIDEO_BPP8: if (IS_ENABLED(CONFIG_VIDEO_BPP8)) { @@ -157,6 +171,7 @@ static int console_set_row_2(struct udevice *dev, uint row, int clr)

for (i = 0; i < pixels; i++) *dst++ = clr; + end = dst; break; } case VIDEO_BPP16: @@ -165,6 +180,7 @@ static int console_set_row_2(struct udevice *dev, uint row, int clr)

for (i = 0; i < pixels; i++) *dst++ = clr; + end = dst; break; } case VIDEO_BPP32: @@ -173,11 +189,15 @@ static int console_set_row_2(struct udevice *dev, uint row, int clr)

for (i = 0; i < pixels; i++) *dst++ = clr; + end = dst; break; } default: return -ENOSYS; } + ret = vidconsole_sync_copy(dev, start, end); + if (ret) + return ret;

return 0; } @@ -195,7 +215,8 @@ static int console_move_rows_2(struct udevice *dev, uint rowdst, uint rowsrc, vid_priv->line_length; src = end - (rowsrc + count) * VIDEO_FONT_HEIGHT * vid_priv->line_length; - memmove(dst, src, VIDEO_FONT_HEIGHT * vid_priv->line_length * count); + vidconsole_memmove(dev, dst, src, + VIDEO_FONT_HEIGHT * vid_priv->line_length * count);

return 0; } @@ -206,14 +227,15 @@ static int console_putc_xy_2(struct udevice *dev, uint x_frac, uint y, char ch) struct udevice *vid = dev->parent; struct video_priv *vid_priv = dev_get_uclass_priv(vid); int pbytes = VNBYTES(vid_priv->bpix); - int i, row, x, linenum; - void *line; + int i, row, x, linenum, ret; + void *start, *line;

if (x_frac + VID_TO_POS(vc_priv->x_charsize) > vc_priv->xsize_frac) return -EAGAIN; linenum = vid_priv->ysize - y - 1; x = vid_priv->xsize - VID_TO_PIXEL(x_frac) - 1; - line = vid_priv->fb + linenum * vid_priv->line_length + x * pbytes; + start = vid_priv->fb + linenum * vid_priv->line_length + x * pbytes; + line = start;

for (row = 0; row < VIDEO_FONT_HEIGHT; row++) { unsigned int idx = (u8)ch * VIDEO_FONT_HEIGHT + row; @@ -261,6 +283,10 @@ static int console_putc_xy_2(struct udevice *dev, uint x_frac, uint y, char ch) } line -= vid_priv->line_length; } + /* Add 4 bytes to allow for the first pixel writen */ + ret = vidconsole_sync_copy(dev, start + 4, line); + if (ret) + return ret;

return VID_TO_POS(VIDEO_FONT_WIDTH); } @@ -269,10 +295,11 @@ static int console_set_row_3(struct udevice *dev, uint row, int clr) { struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent); int pbytes = VNBYTES(vid_priv->bpix); - void *line; - int i, j; + void *start, *line; + int i, j, ret;

- line = vid_priv->fb + row * VIDEO_FONT_HEIGHT * pbytes; + start = vid_priv->fb + row * VIDEO_FONT_HEIGHT * pbytes; + line = start; for (j = 0; j < vid_priv->ysize; j++) { switch (vid_priv->bpix) { case VIDEO_BPP8: @@ -304,6 +331,9 @@ static int console_set_row_3(struct udevice *dev, uint row, int clr) } line += vid_priv->line_length; } + ret = vidconsole_sync_copy(dev, start, line); + if (ret) + return ret;

return 0; } @@ -315,13 +345,16 @@ static int console_move_rows_3(struct udevice *dev, uint rowdst, uint rowsrc, int pbytes = VNBYTES(vid_priv->bpix); void *dst; void *src; - int j; + int j, ret;

dst = vid_priv->fb + rowdst * VIDEO_FONT_HEIGHT * pbytes; src = vid_priv->fb + rowsrc * VIDEO_FONT_HEIGHT * pbytes;

for (j = 0; j < vid_priv->ysize; j++) { - memmove(dst, src, VIDEO_FONT_HEIGHT * pbytes * count); + ret = vidconsole_memmove(dev, dst, src, + VIDEO_FONT_HEIGHT * pbytes * count); + if (ret) + return ret; src += vid_priv->line_length; dst += vid_priv->line_length; } @@ -336,15 +369,15 @@ static int console_putc_xy_3(struct udevice *dev, uint x_frac, uint y, char ch) struct video_priv *vid_priv = dev_get_uclass_priv(vid); uchar *pfont = video_fontdata + (u8)ch * VIDEO_FONT_HEIGHT; int pbytes = VNBYTES(vid_priv->bpix); - int i, col, x; + int i, col, x, ret; int mask = 0x80; - void *line; + void *start, *line;

if (x_frac + VID_TO_POS(vc_priv->x_charsize) > vc_priv->xsize_frac) return -EAGAIN; x = vid_priv->ysize - VID_TO_PIXEL(x_frac) - 1; - line = vid_priv->fb + x * vid_priv->line_length + y * pbytes; - + start = vid_priv->fb + x * vid_priv->line_length + y * pbytes; + line = start; for (col = 0; col < VIDEO_FONT_HEIGHT; col++) { switch (vid_priv->bpix) { case VIDEO_BPP8: @@ -386,6 +419,10 @@ static int console_putc_xy_3(struct udevice *dev, uint x_frac, uint y, char ch) line -= vid_priv->line_length; mask >>= 1; } + /* Add a line to allow for the first pixels writen */ + ret = vidconsole_sync_copy(dev, start + vid_priv->line_length, line); + if (ret) + return ret;

return VID_TO_POS(VIDEO_FONT_WIDTH); }

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 16/26] video: Update the copy framebuffer when writing bitmaps

Adjust the bitmap code to sync to the copy framebuffer when done.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/video_bmp.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/video/video_bmp.c b/drivers/video/video_bmp.c index 7d7f37b445..5a4d12c68d 100644 --- a/drivers/video/video_bmp.c +++ b/drivers/video/video_bmp.c @@ -192,7 +192,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, struct video_priv *priv = dev_get_uclass_priv(dev); ushort *cmap_base = NULL; int i, j; - uchar *fb; + uchar *start, *fb; struct bmp_image *bmp = map_sysmem(bmp_image, 0); uchar *bmap; ushort padded_width; @@ -201,6 +201,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, unsigned colours, bpix, bmp_bpix; struct bmp_color_table_entry *palette; int hdr_size; + int ret;

if (!bmp || !(bmp->header.signature[0] == 'B' && bmp->header.signature[1] == 'M')) { @@ -261,8 +262,11 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, height = priv->ysize - y;

bmap = (uchar *)bmp + get_unaligned_le32(&bmp->header.data_offset); - fb = (uchar *)(priv->fb + - (y + height - 1) * priv->line_length + x * bpix / 8); + start = (uchar *)(priv->fb + + (y + height) * priv->line_length + x * bpix / 8); + + /* Move back to the final line to be drawn */ + fb = start - priv->line_length;

switch (bmp_bpix) { case 1: @@ -369,6 +373,12 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, break; };

+ /* Find the position of the top left of the image in the framebuffer */ + fb = (uchar *)(priv->fb + y * priv->line_length + x * bpix / 8); + ret = video_sync_copy(dev, start, fb); + if (ret) + return log_ret(ret); + video_sync(dev, false);

return 0;

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 17/26] video: Add comments to struct sandbox_sdl_plat

This struct is not commented but needs it. Also fix the comment in check_vidconsole_output() about the encoding for the rotation value.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

include/dm/test.h | 14 +++++++++++++- test/dm/video.c | 3 ++- 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/include/dm/test.h b/include/dm/test.h index f0f36624ce..d39686cde2 100644 --- a/include/dm/test.h +++ b/include/dm/test.h @@ -159,7 +159,19 @@ enum { /* Declare a new driver model test */ #define DM_TEST(_name, _flags) UNIT_TEST(_name, _flags, dm_test)

-/* This platform data is needed in tests, so declare it here */ +/* + * struct sandbox_sdl_plat - Platform data for the SDL video driver + * + * This platform data is needed in tests, so declare it here + * + * @xres: Width of display in pixels + * @yres: Height of display in pixels + * @bpix: Log2 of bits per pixel (enum video_log2_bpp) + * @rot: Console rotation (0=normal orientation, 1=90 degrees clockwise, + * 2=upside down, 3=90 degree counterclockwise) + * @vidconsole_drv_name: Name of video console driver (set by tests) + * @font_size: Console font size to select (set by tests) + */ struct sandbox_sdl_plat { int xres; int yres; diff --git a/test/dm/video.c b/test/dm/video.c index 68f5ba44e7..729c31b47d 100644 --- a/test/dm/video.c +++ b/test/dm/video.c @@ -188,7 +188,8 @@ DM_TEST(dm_test_video_ansi, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); * check_vidconsole_output() - Run a text console test * * @uts: Test state - * @rot: Console rotation (0, 90, 180, 270) + * @rot: Console rotation (0=normal orientation, 1=90 degrees clockwise, + * 2=upside down, 3=90 degree counterclockwise) * @wrap_size: Expected size of compressed frame buffer for the wrap test * @scroll_size: Same for the scroll test * @return 0 on success

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 18/26] video: sandbox: Add support for the copy framebuffer

Enable this feature on sandbox by updating the SDL driver to have two framebuffers.

Update the video tests to check that the copy framebuffer is kept in sync.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

configs/sandbox_defconfig | 1 + drivers/video/sandbox_sdl.c | 9 +++++- test/dm/video.c | 55 +++++++++++++++++++++++-------------- 3 files changed, 43 insertions(+), 22 deletions(-)

diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 20a81a0350..ee7ae9cb21 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -214,6 +214,7 @@ CONFIG_DM_USB=y CONFIG_USB_EMUL=y CONFIG_USB_KEYBOARD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_COPY=y CONFIG_CONSOLE_ROTATION=y CONFIG_CONSOLE_TRUETYPE=y CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y diff --git a/drivers/video/sandbox_sdl.c b/drivers/video/sandbox_sdl.c index c678e728db..f529a350fb 100644 --- a/drivers/video/sandbox_sdl.c +++ b/drivers/video/sandbox_sdl.c @@ -23,6 +23,7 @@ enum {

static int sandbox_sdl_probe(struct udevice *dev) { + struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev); struct sandbox_sdl_plat *plat = dev_get_platdata(dev); struct video_priv *uc_priv = dev_get_uclass_priv(dev); struct sandbox_state *state = state_get_current(); @@ -40,6 +41,8 @@ static int sandbox_sdl_probe(struct udevice *dev) uc_priv->rot = plat->rot; uc_priv->vidconsole_drv_name = plat->vidconsole_drv_name; uc_priv->font_size = plat->font_size; + if (IS_ENABLED(CONFIG_VIDEO_COPY)) + uc_plat->copy_base = uc_plat->base - uc_plat->size / 2;

return 0; } @@ -55,7 +58,11 @@ static int sandbox_sdl_bind(struct udevice *dev) plat->bpix = dev_read_u32_default(dev, "log2-depth", VIDEO_BPP16); plat->rot = dev_read_u32_default(dev, "rotate", 0); uc_plat->size = plat->xres * plat->yres * (1 << plat->bpix) / 8; - debug("%s: Frame buffer size %x\n", __func__, uc_plat->size); + + /* Allow space for two buffers, the lower one being the copy buffer */ + log_debug("Frame buffer size %x\n", uc_plat->size); + if (IS_ENABLED(CONFIG_VIDEO_COPY)) + uc_plat->size *= 2;

return ret; } diff --git a/test/dm/video.c b/test/dm/video.c index 729c31b47d..19f78b6239 100644 --- a/test/dm/video.c +++ b/test/dm/video.c @@ -51,12 +51,18 @@ DM_TEST(dm_test_video_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); * size of the compressed data. This provides a pretty good level of * certainty and the resulting tests need only check a single value. * + * If the copy framebuffer is enabled, this compares it to the main framebuffer + * too. + * + * @uts: Test state * @dev: Video device * @return compressed size of the frame buffer, or -ve on error */ -static int compress_frame_buffer(struct udevice *dev) +static int compress_frame_buffer(struct unit_test_state *uts, + struct udevice *dev) { struct video_priv *priv = dev_get_uclass_priv(dev); + struct video_priv *uc_priv = dev_get_uclass_priv(dev); uint destlen; void *dest; int ret; @@ -72,6 +78,13 @@ static int compress_frame_buffer(struct udevice *dev) if (ret) return ret;

+ /* Check here that the copy frame buffer is working correctly */ + if (IS_ENABLED(CONFIG_VIDEO_COPY)) { + ut_assertf(!memcmp(uc_priv->fb, uc_priv->copy_fb, + uc_priv->fb_size), + "Copy framebuffer does not match fb"); + } + return destlen; }

@@ -110,25 +123,25 @@ static int dm_test_video_text(struct unit_test_state *uts)

ut_assertok(select_vidconsole(uts, "vidconsole0")); ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); - ut_asserteq(46, compress_frame_buffer(dev)); + ut_asserteq(46, compress_frame_buffer(uts, dev));

ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); vidconsole_putc_xy(con, 0, 0, 'a'); - ut_asserteq(79, compress_frame_buffer(dev)); + ut_asserteq(79, compress_frame_buffer(uts, dev));

vidconsole_putc_xy(con, 0, 0, ' '); - ut_asserteq(46, compress_frame_buffer(dev)); + ut_asserteq(46, compress_frame_buffer(uts, dev));

for (i = 0; i < 20; i++) vidconsole_putc_xy(con, VID_TO_POS(i * 8), 0, ' ' + i); - ut_asserteq(273, compress_frame_buffer(dev)); + ut_asserteq(273, compress_frame_buffer(uts, dev));

vidconsole_set_row(con, 0, WHITE); - ut_asserteq(46, compress_frame_buffer(dev)); + ut_asserteq(46, compress_frame_buffer(uts, dev));

for (i = 0; i < 20; i++) vidconsole_putc_xy(con, VID_TO_POS(i * 8), 0, ' ' + i); - ut_asserteq(273, compress_frame_buffer(dev)); + ut_asserteq(273, compress_frame_buffer(uts, dev));

return 0; } @@ -144,7 +157,7 @@ static int dm_test_video_chars(struct unit_test_state *uts) ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); vidconsole_put_string(con, test_string); - ut_asserteq(466, compress_frame_buffer(dev)); + ut_asserteq(466, compress_frame_buffer(uts, dev));

return 0; } @@ -164,20 +177,20 @@ static int dm_test_video_ansi(struct unit_test_state *uts) /* reference clear: */ video_clear(con->parent); video_sync(con->parent, false); - ut_asserteq(46, compress_frame_buffer(dev)); + ut_asserteq(46, compress_frame_buffer(uts, dev));

/* test clear escape sequence: [2J */ vidconsole_put_string(con, "A\tB\tC"ANSI_ESC"[2J"); - ut_asserteq(46, compress_frame_buffer(dev)); + ut_asserteq(46, compress_frame_buffer(uts, dev));

/* test set-cursor: [%d;%df */ vidconsole_put_string(con, "abc"ANSI_ESC"[2;2fab"ANSI_ESC"[4;4fcd"); - ut_asserteq(143, compress_frame_buffer(dev)); + ut_asserteq(143, compress_frame_buffer(uts, dev));

/* test colors (30-37 fg color, 40-47 bg color) */ vidconsole_put_string(con, ANSI_ESC"[30;41mfoo"); /* black on red */ vidconsole_put_string(con, ANSI_ESC"[33;44mbar"); /* yellow on blue */ - ut_asserteq(272, compress_frame_buffer(dev)); + ut_asserteq(272, compress_frame_buffer(uts, dev));

return 0; } @@ -208,24 +221,24 @@ static int check_vidconsole_output(struct unit_test_state *uts, int rot,

ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); - ut_asserteq(46, compress_frame_buffer(dev)); + ut_asserteq(46, compress_frame_buffer(uts, dev));

/* Check display wrap */ for (i = 0; i < 120; i++) vidconsole_put_char(con, 'A' + i % 50); - ut_asserteq(wrap_size, compress_frame_buffer(dev)); + ut_asserteq(wrap_size, compress_frame_buffer(uts, dev));

/* Check display scrolling */ for (i = 0; i < SCROLL_LINES; i++) { vidconsole_put_char(con, 'A' + i % 50); vidconsole_put_char(con, '\n'); } - ut_asserteq(scroll_size, compress_frame_buffer(dev)); + ut_asserteq(scroll_size, compress_frame_buffer(uts, dev));

/* If we scroll enough, the screen becomes blank again */ for (i = 0; i < SCROLL_LINES; i++) vidconsole_put_char(con, '\n'); - ut_asserteq(46, compress_frame_buffer(dev)); + ut_asserteq(46, compress_frame_buffer(uts, dev));

return 0; } @@ -299,7 +312,7 @@ static int dm_test_video_bmp(struct unit_test_state *uts) ut_assertok(read_file(uts, "tools/logos/denx.bmp", &addr));

ut_assertok(video_bmp_display(dev, addr, 0, 0, false)); - ut_asserteq(1368, compress_frame_buffer(dev)); + ut_asserteq(1368, compress_frame_buffer(uts, dev));

return 0; } @@ -315,7 +328,7 @@ static int dm_test_video_bmp_comp(struct unit_test_state *uts) ut_assertok(read_file(uts, "tools/logos/denx-comp.bmp", &addr));

ut_assertok(video_bmp_display(dev, addr, 0, 0, false)); - ut_asserteq(1368, compress_frame_buffer(dev)); + ut_asserteq(1368, compress_frame_buffer(uts, dev));

return 0; } @@ -330,7 +343,7 @@ static int dm_test_video_truetype(struct unit_test_state *uts) ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); vidconsole_put_string(con, test_string); - ut_asserteq(12237, compress_frame_buffer(dev)); + ut_asserteq(12237, compress_frame_buffer(uts, dev));

return 0; } @@ -351,7 +364,7 @@ static int dm_test_video_truetype_scroll(struct unit_test_state *uts) ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); vidconsole_put_string(con, test_string); - ut_asserteq(35030, compress_frame_buffer(dev)); + ut_asserteq(35030, compress_frame_buffer(uts, dev));

return 0; } @@ -372,7 +385,7 @@ static int dm_test_video_truetype_bs(struct unit_test_state *uts) ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); vidconsole_put_string(con, test_string); - ut_asserteq(29018, compress_frame_buffer(dev)); + ut_asserteq(29018, compress_frame_buffer(uts, dev));

return 0; }

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 19/26] video: pci: Set up the copy framebuffer

When using a copy framebuffer we need to tell the video subsystem its address. U-Boot's normally allocated framebuffer is used as the working buffer, but nothing is displayed until it is copied to the copy framebuffer.

For this to work the video driver must request that a framebuffer be allocated separately from the hardware framebuffer, so add a check for that.

Also add a log category so that logging appears correctly.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/pci/pci_rom.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c index 6a9bc49978..fa29d69e85 100644 --- a/drivers/pci/pci_rom.c +++ b/drivers/pci/pci_rom.c @@ -22,6 +22,8 @@ * Copyright 1997 -- 1999 Martin Mares mj@atrey.karlin.mff.cuni.cz */

+#define LOG_CATEGORY UCLASS_PCI + #include <common.h> #include <bios_emul.h> #include <bootstage.h> @@ -344,7 +346,16 @@ int vbe_setup_video_priv(struct vesa_mode_info *vesa, default: return -EPROTONOSUPPORT; } - plat->base = vesa->phys_base_ptr; + + /* Use double buffering if enabled */ + if (IS_ENABLED(CONFIG_VIDEO_COPY)) { + if (!plat->base) + return log_msg_ret("copy", -ENFILE); + plat->copy_base = vesa->phys_base_ptr; + } else { + plat->base = vesa->phys_base_ptr; + } + log_debug("base = %lx, copy_base = %lx\n", plat->base, plat->copy_base); plat->size = vesa->bytes_per_scanline * vesa->y_resolution;

return 0; @@ -372,6 +383,15 @@ int vbe_setup_video(struct udevice *dev, int (*int15_handler)(void))

ret = vbe_setup_video_priv(&mode_info.vesa, uc_priv, plat); if (ret) { + if (ret == -ENFILE) { + /* + * See video-uclass.c for how to set up reserved memory + * in your video driver + */ + log_err("CONFIG_VIDEO_COPY enabled but driver '%s' set up no reserved memory\n", + dev->driver->name); + } + debug("No video mode configured\n"); return ret; }

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 20/26] x86: fsp: video: Allocate a frame buffer when needed

When the copy framebuffer is in use, we must also have the standard U-Boot framebuffer available. Update the FSP driver to support this.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

arch/x86/lib/fsp/fsp_graphics.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)

diff --git a/arch/x86/lib/fsp/fsp_graphics.c b/arch/x86/lib/fsp/fsp_graphics.c index 6e23f3c95f..e8c1e07af1 100644 --- a/arch/x86/lib/fsp/fsp_graphics.c +++ b/arch/x86/lib/fsp/fsp_graphics.c @@ -117,6 +117,16 @@ err: return ret; }

+static int fsp_video_bind(struct udevice *dev) +{ + struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); + + /* Set the maximum supported resolution */ + plat->size = 2560 * 1600 * 4; + + return 0; +} + static const struct udevice_id fsp_video_ids[] = { { .compatible = "fsp-fb" }, { } @@ -126,7 +136,9 @@ U_BOOT_DRIVER(fsp_video) = { .name = "fsp_video", .id = UCLASS_VIDEO, .of_match = fsp_video_ids, + .bind = fsp_video_bind, .probe = fsp_video_probe, + .flags = DM_FLAG_PRE_RELOC, };

static struct pci_device_id fsp_video_supported[] = {

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 21/26] video: Correctly handle multiple framebuffers

At present video_bottom is set to the bottom of each framebuffer when it is allocated. This is not correct, since it should hold the bottom of the entire area available for framebuffers.

Fix this by adding a private address in the uclass which keeps track of the next available spot for a framebuffer.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/video-uclass.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index 4ddd8bc1db..4735a22dc1 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -46,6 +46,19 @@ */ DECLARE_GLOBAL_DATA_PTR;

+/** + * struct video_uc_priv - Information for the video uclass + * + * @video_ptr: Current allocation position of the video framebuffer pointer. + * While binding devices after relocation, this points to the next + * available address to use for a device's framebuffer. It starts at + * gd->video_top and works downwards, running out of space when it hits + * gd->video_bottom. + */ +struct video_uc_priv { + ulong video_ptr; +}; + void video_set_flush_dcache(struct udevice *dev, bool flush) { struct video_priv *priv = dev_get_uclass_priv(dev); @@ -351,12 +364,21 @@ static int video_post_probe(struct udevice *dev) /* Post-relocation, allocate memory for the frame buffer */ static int video_post_bind(struct udevice *dev) { - ulong addr = gd->video_top; + struct video_uc_priv *uc_priv; + ulong addr; ulong size;

/* Before relocation there is nothing to do here */ if (!(gd->flags & GD_FLG_RELOC)) return 0; + + /* Set up the video pointer, if this is the first device */ + uc_priv = dev->uclass->priv; + if (!uc_priv->video_ptr) + uc_priv->video_ptr = gd->video_top; + + /* Allocate framebuffer space for this device */ + addr = uc_priv->video_ptr; size = alloc_fb(dev, &addr); if (addr < gd->video_bottom) { /* Device tree node may need the 'u-boot,dm-pre-reloc' or @@ -368,7 +390,7 @@ static int video_post_bind(struct udevice *dev) } debug("%s: Claiming %lx bytes at %lx for video device '%s'\n", __func__, size, addr, dev->name); - gd->video_bottom = addr; + uc_priv->video_ptr = addr;

return 0; } @@ -381,6 +403,7 @@ UCLASS_DRIVER(video) = { .pre_probe = video_pre_probe, .post_probe = video_post_probe, .pre_remove = video_pre_remove, + .priv_auto_alloc_size = sizeof(struct video_uc_priv), .per_device_auto_alloc_size = sizeof(struct video_priv), .per_device_platdata_auto_alloc_size = sizeof(struct video_uc_platdata), };

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 22/26] x86: video: Support copy framebuffer with probed devices

For PCI video devices that are not mentioned in the devicetree, U-Boot does not bind a driver before relocation, since PCI is not fully probed at that point. Furthermore it is possible for the video device to be on a secondary bus which is not even scanned.

This is fine if the framebuffer is allocated in fixed memory, as it normally is on x86. But when using this as a copy framebuffer, we also need U-Boot to allocate its own cached framebuffer for working in. Since the video driver is never bound before relocation, the framebuffer size is never set and U-Boot does no allocation.

Add a new CONFIG option to reserve 16MB of memory for this eventuality. This allows vesa devices to use the copy framebuffer.

Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Anatolij Gustschin agust@denx.de ---

(no changes since v1)

drivers/video/Kconfig | 19 +++++++++++++++++++ drivers/video/video-uclass.c | 5 +++++ 2 files changed, 24 insertions(+)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 8f0feec6af..9ecd6d4df4 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -22,6 +22,25 @@ config BACKLIGHT This provides backlight uclass driver that enables basic panel backlight support.

+config VIDEO_PCI_DEFAULT_FB_SIZE + hex "Default framebuffer size to use if no drivers request it" + depends on DM_VIDEO + default 0x1000000 if X86 && PCI + default 0 if !(X86 && PCI) + help + Generally, video drivers request the amount of memory they need for + the frame buffer when they are bound, by setting the size field in + struct video_uc_platdata. That memory is then reserved for use after + relocation. But PCI drivers cannot be bound before relocation unless + they are mentioned in the devicetree. + + With this value set appropriately, it is possible for PCI video + devices to have a framebuffer allocated by U-Boot. + + Note: the framebuffer needs to be large enough to store all pixels at + maximum resolution. For example, at 1920 x 1200 with 32 bits per + pixel, 2560 * 1600 * 32 / 8 = 0xfa0000 bytes are needed. + config VIDEO_COPY bool "Enable copying the frame buffer to a hardware copy" depends on DM_VIDEO diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index 4735a22dc1..650891e49d 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -97,6 +97,11 @@ int video_reserve(ulong *addrp) debug("%s: Reserving %lx bytes at %lx for video device '%s'\n", __func__, size, *addrp, dev->name); } + + /* Allocate space for PCI video devices in case there were not bound */ + if (*addrp == gd->video_top) + *addrp -= CONFIG_VIDEO_PCI_DEFAULT_FB_SIZE; + gd->video_bottom = *addrp; gd->fb_base = *addrp; debug("Video frame buffers from %lx to %lx\n", gd->video_bottom,

-- 2.27.0.212.ge8ba1cc988-goog

Simon Glass

5:12 a.m.

New subject: [RESEND PATCH v3 26/26] x86: minnowmax: Drop screen resolution to 1024x768

This seems like a more reasonable resolution for this board, since it is quite slow. It also allows it to work with a 5" LCD display in my lab.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v1)

configs/minnowmax_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index 4fbc920dd0..13d6edd08c 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -61,5 +61,5 @@ CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y CONFIG_VIDEO_COPY=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y -CONFIG_FRAMEBUFFER_VESA_MODE_11B=y +CONFIG_FRAMEBUFFER_VESA_MODE_118=y # CONFIG_GZIP is not set

-- 2.27.0.212.ge8ba1cc988-goog

Bin Meng

7 Jul 7 Jul

8:43 a.m.

On Fri, Jul 3, 2020 at 11:12 AM Simon Glass sjg@chromium.org wrote:

...

(resent for Bin, rebased to u-boot/next)

Some architectures use a cached framebuffer and flush the cache as needed so that changes are visible. This is supported by U-Boot.

However x86 uses an uncached framebuffer with a 'write-combining' feature to speed up writes. Reads are permitted but they are extremely expensive.

Unfortunately, reading from the frame buffer is quite common, e.g. to scroll it. This makes scrolling very slow.

This series adds a new feature which supports copying modified parts of the frame buffer to the uncached hardware buffer. This speeds up scrolling dramatically on x86 so the extra complexity cost seems worth it.

In an extreme case, the time to print the environment on minnowboard with 1280x1024 and CONFIG_CONSOLE_SCROLL_LINES disabled is reduced significantly, from 13 seconds to 300ms.

Changes in v3:

Drop unnecessary variable

Changes in v2:

Simplify return sequence in vidconsole_memmove() since there is no logging

Simon Glass (26): x86: fsp: Reinit the FPU after FSP meminit console: Add a way to output to serial only video: Show an error when a vidconsole function fails sandbox: video: Allow selection of rotated console video: Split out expression parts into variables video: Adjust rotated console to start at right edge video: Drop unnecessary #ifdef around vid_console_color() video: Add a comment for struct video_uc_platdata video: Add support for copying to a hardware framebuffer video: Set up the copy framebuffer when enabled video: Clear the copy framebuffer when clearing the screen video: Add helpers for vidconsole for the copy framebuffer video: Update normal console to support copy buffer video: Update truetype console to support copy buffer video: Update rotated console to support copy buffer video: Update the copy framebuffer when writing bitmaps video: Add comments to struct sandbox_sdl_plat video: sandbox: Add support for the copy framebuffer video: pci: Set up the copy framebuffer x86: fsp: video: Allocate a frame buffer when needed video: Correctly handle multiple framebuffers x86: video: Support copy framebuffer with probed devices chromebook_samus: Enable the copy framebuffer chromebook_link: Enable the copy framebuffer minnowmax: Enable the copy framebuffer x86: minnowmax: Drop screen resolution to 1024x768

arch/x86/cpu/i386/cpu.c | 5 ++ arch/x86/include/asm/u-boot-x86.h | 8 +++ arch/x86/lib/fsp/fsp_graphics.c | 12 ++++ arch/x86/lib/fsp2/fsp_meminit.c | 1 + common/console.c | 28 ++++++-- configs/chromebook_link_defconfig | 2 +- configs/chromebook_samus_defconfig | 2 +- configs/minnowmax_defconfig | 4 +- configs/sandbox_defconfig | 1 + drivers/pci/pci_rom.c | 22 +++++- drivers/video/Kconfig | 31 +++++++++ drivers/video/broadwell_igd.c | 16 ++++- drivers/video/console_normal.c | 26 +++++++- drivers/video/console_rotate.c | 103 ++++++++++++++++++++--------- drivers/video/console_truetype.c | 43 ++++++++---- drivers/video/ivybridge_igd.c | 26 ++++++-- drivers/video/sandbox_sdl.c | 10 ++- drivers/video/vesa.c | 30 ++++++++- drivers/video/vidconsole-uclass.c | 38 ++++++++++- drivers/video/video-uclass.c | 93 +++++++++++++++++++++++++- drivers/video/video_bmp.c | 16 ++++- include/console.h | 13 ++++ include/dm/test.h | 14 +++- include/video.h | 41 ++++++++++++ include/video_console.h | 51 +++++++++++++- test/dm/video.c | 60 ++++++++++------- 26 files changed, 594 insertions(+), 102 deletions(-)

--

series applied to u-boot-x86, thanks!

1767

Age (days ago)

1771

Last active (days ago)

List overview

Download

23 comments

2 participants

tags (0)

participants (2)

Bin Meng
Simon Glass