[U-Boot-Users] Pointer to similar board?
I've been trying to get Das u-boot going on my S3C2410 based board and had no luck so far. Just trying to get something over the serial port for now. I have a Wiggler to JTAG the initial u-boot.bin
Part of the problem is the target is brand new and not supported by anybody yet. I'm wondering if there's a similar board already supported by u-boot?
Its the CUWin at http://cubloc.com/product/05_01.php
NOR Am29LV800 NAND 2 x K9F1208 RAM 64MB SDRAM
No extra drivers, just the built in S3C2410 LCD, serial, ethernet et. al. I'd like to put u-boot in NOR to save some NAND space and because I can't make heads nor tails out of this steppingstones stuff.
Thanks for your patience and help!
Hi,
u-boot-users-bounces@lists.sourceforge.net wrote on Thursday, April 03, 2008 3:37 AM:
I've been trying to get Das u-boot going on my S3C2410 based board and had no luck so far. Just trying to get something over the serial port for now. I have a Wiggler to JTAG the initial u-boot.bin
Part of the problem is the target is brand new and not supported by anybody yet. I'm wondering if there's a similar board already supported by u-boot?
Take a look into the Makefile and search for "s3c24x0". The "smdk2410" is the eval board from Samsung. Maybe this is a good starting point.
Its the CUWin at http://cubloc.com/product/05_01.php
NOR Am29LV800 NAND 2 x K9F1208 RAM 64MB SDRAM
No extra drivers, just the built in S3C2410 LCD, serial, ethernet et.
Ethernet is not built into the S3C2410!
Best Regards, Martin
participants (2)
-
Martin Krause -
PatM