[U-Boot] [PATCH V3 1/4] mmc: tmio: Switch to clock framework

Switch the driver to using clk_get_rate()/clk_set_rate() instead of caching the mclk frequency in it's private data. This is required on the SDHI variant of the controller, where the upstream mclk need to be adjusted when using UHS modes.
Platforms which do not support clock framework or do not support it in eg. SPL default to 100 MHz clock.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Masahiro Yamada yamada.masahiro@socionext.com --- V2: - Fix build on certain platforms using SPL without clock framework V3: - Turn clk_get_rate into a callback and fill it as needed on both renesas and socionext platforms --- drivers/mmc/renesas-sdhi.c | 21 +++++++++++++-------- drivers/mmc/tmio-common.c | 17 ++++++++++++++--- drivers/mmc/tmio-common.h | 5 ++++- drivers/mmc/uniphier-sd.c | 30 ++++++++++++++++++++---------- 4 files changed, 51 insertions(+), 22 deletions(-)
diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c index e7f96f8bf2..f4283d055f 100644 --- a/drivers/mmc/renesas-sdhi.c +++ b/drivers/mmc/renesas-sdhi.c @@ -358,15 +358,21 @@ static const struct udevice_id renesas_sdhi_match[] = { { /* sentinel */ } };
+static ulong renesas_sdhi_clk_get_rate(struct tmio_sd_priv *priv) +{ + return clk_get_rate(&priv->clk); +} + static int renesas_sdhi_probe(struct udevice *dev) { struct tmio_sd_priv *priv = dev_get_priv(dev); u32 quirks = dev_get_driver_data(dev); struct fdt_resource reg_res; - struct clk clk; DECLARE_GLOBAL_DATA_PTR; int ret;
+ priv->clk_get_rate = renesas_sdhi_clk_get_rate; + if (quirks == RENESAS_GEN2_QUIRKS) { ret = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg", 0, ®_res); @@ -380,22 +386,21 @@ static int renesas_sdhi_probe(struct udevice *dev) quirks |= TMIO_SD_CAP_16BIT; }
- ret = clk_get_by_index(dev, 0, &clk); + ret = clk_get_by_index(dev, 0, &priv->clk); if (ret < 0) { dev_err(dev, "failed to get host clock\n"); return ret; }
/* set to max rate */ - priv->mclk = clk_set_rate(&clk, ULONG_MAX); - if (IS_ERR_VALUE(priv->mclk)) { + ret = clk_set_rate(&priv->clk, 200000000); + if (ret < 0) { dev_err(dev, "failed to set rate for host clock\n"); - clk_free(&clk); - return priv->mclk; + clk_free(&priv->clk); + return ret; }
- ret = clk_enable(&clk); - clk_free(&clk); + ret = clk_enable(&priv->clk); if (ret) { dev_err(dev, "failed to enable host clock\n"); return ret; diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c index 0eca83a0f4..3ba2f07460 100644 --- a/drivers/mmc/tmio-common.c +++ b/drivers/mmc/tmio-common.c @@ -555,16 +555,24 @@ static void tmio_sd_set_ddr_mode(struct tmio_sd_priv *priv, tmio_sd_writel(priv, tmp, TMIO_SD_IF_MODE); }
+static ulong tmio_sd_clk_get_rate(struct tmio_sd_priv *priv) +{ + return priv->clk_get_rate(priv); +} + static void tmio_sd_set_clk_rate(struct tmio_sd_priv *priv, struct mmc *mmc) { unsigned int divisor; u32 val, tmp; + ulong mclk;
if (!mmc->clock) return;
- divisor = DIV_ROUND_UP(priv->mclk, mmc->clock); + mclk = tmio_sd_clk_get_rate(priv); + + divisor = DIV_ROUND_UP(mclk, mmc->clock);
if (divisor <= 1) val = (priv->caps & TMIO_SD_CAP_RCAR) ? @@ -708,6 +716,7 @@ int tmio_sd_probe(struct udevice *dev, u32 quirks) struct tmio_sd_priv *priv = dev_get_priv(dev); struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); fdt_addr_t base; + ulong mclk; int ret;
base = devfdt_get_addr(dev); @@ -750,10 +759,12 @@ int tmio_sd_probe(struct udevice *dev, u32 quirks)
tmio_sd_host_init(priv);
+ mclk = tmio_sd_clk_get_rate(priv); + plat->cfg.voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34; - plat->cfg.f_min = priv->mclk / + plat->cfg.f_min = mclk / (priv->caps & TMIO_SD_CAP_DIV1024 ? 1024 : 512); - plat->cfg.f_max = priv->mclk; + plat->cfg.f_max = mclk; plat->cfg.b_max = U32_MAX; /* max value of TMIO_SD_SECCNT */
upriv->mmc = &plat->mmc; diff --git a/drivers/mmc/tmio-common.h b/drivers/mmc/tmio-common.h index 792b1ba5ae..6591c61c3c 100644 --- a/drivers/mmc/tmio-common.h +++ b/drivers/mmc/tmio-common.h @@ -117,7 +117,6 @@ struct tmio_sd_plat {
struct tmio_sd_priv { void __iomem *regbase; - unsigned long mclk; unsigned int version; u32 caps; #define TMIO_SD_CAP_NONREMOVABLE BIT(0) /* Nonremovable e.g. eMMC */ @@ -133,6 +132,10 @@ struct tmio_sd_priv { #ifdef CONFIG_DM_REGULATOR struct udevice *vqmmc_dev; #endif +#if CONFIG_IS_ENABLED(CLK) + struct clk clk; +#endif + ulong (*clk_get_rate)(struct tmio_sd_priv *); };
int tmio_sd_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, diff --git a/drivers/mmc/uniphier-sd.c b/drivers/mmc/uniphier-sd.c index 813c28494c..6539880ab5 100644 --- a/drivers/mmc/uniphier-sd.c +++ b/drivers/mmc/uniphier-sd.c @@ -31,35 +31,45 @@ static const struct udevice_id uniphier_sd_match[] = { { /* sentinel */ } };
+static ulong uniphier_sd_clk_get_rate(struct tmio_sd_priv *priv) +{ +#if CONFIG_IS_ENABLED(CLK) + return clk_get_rate(&priv->clk); +#elif CONFIG_SPL_BUILD + return 100000000; +#else + return 0; +#endif +} + static int uniphier_sd_probe(struct udevice *dev) { struct tmio_sd_priv *priv = dev_get_priv(dev); + + priv->clk_get_rate = uniphier_sd_clk_get_rate; + #ifndef CONFIG_SPL_BUILD - struct clk clk; int ret;
- ret = clk_get_by_index(dev, 0, &clk); + ret = clk_get_by_index(dev, 0, &priv->clk); if (ret < 0) { dev_err(dev, "failed to get host clock\n"); return ret; }
/* set to max rate */ - priv->mclk = clk_set_rate(&clk, ULONG_MAX); - if (IS_ERR_VALUE(priv->mclk)) { + ret = clk_set_rate(&priv->clk, ULONG_MAX); + if (ret < 0) { dev_err(dev, "failed to set rate for host clock\n"); - clk_free(&clk); - return priv->mclk; + clk_free(&priv->clk); + return ret; }
- ret = clk_enable(&clk); - clk_free(&clk); + ret = clk_enable(&priv->clk); if (ret) { dev_err(dev, "failed to enable host clock\n"); return ret; } -#else - priv->mclk = 100000000; #endif
return tmio_sd_probe(dev, 0);

The TMIO core has a quirk where divider == 1 must not be set in DDR modes. Handle this by setting divider to 2, as suggested in the documentation.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Masahiro Yamada yamada.masahiro@socionext.com --- drivers/mmc/tmio-common.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c index 3ba2f07460..424b60ce52 100644 --- a/drivers/mmc/tmio-common.c +++ b/drivers/mmc/tmio-common.c @@ -574,6 +574,10 @@ static void tmio_sd_set_clk_rate(struct tmio_sd_priv *priv,
divisor = DIV_ROUND_UP(mclk, mmc->clock);
+ /* Do not set divider to 0xff in DDR mode */ + if (mmc->ddr_mode && (divisor == 1)) + divisor = 2; + if (divisor <= 1) val = (priv->caps & TMIO_SD_CAP_RCAR) ? TMIO_SD_CLKCTL_RCAR_DIV1 : TMIO_SD_CLKCTL_DIV1;

The TMIO core has a feature where it can automatically disable clock output when the bus is not in use. While this is useful, it also interferes with switching the bus to 1.8V and other background tasks of the SD/MMC cards, which require clock to be enabled.
This patch respects the mmc->clk_disable and only disables the clock when the MMC core requests it. Otherwise the clock are continuously generated on the bus.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Masahiro Yamada yamada.masahiro@socionext.com --- drivers/mmc/tmio-common.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c index 424b60ce52..fad2816ca5 100644 --- a/drivers/mmc/tmio-common.c +++ b/drivers/mmc/tmio-common.c @@ -612,10 +612,16 @@ static void tmio_sd_set_clk_rate(struct tmio_sd_priv *priv, tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL);
tmp &= ~TMIO_SD_CLKCTL_DIV_MASK; - tmp |= val | TMIO_SD_CLKCTL_OFFEN; + tmp |= val; tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL);
- tmp |= TMIO_SD_CLKCTL_SCLKEN; + if (!mmc->clk_disable) { + tmp &= ~TMIO_SD_CLKCTL_OFFEN; + tmp |= TMIO_SD_CLKCTL_SCLKEN; + } else { + tmp |= TMIO_SD_CLKCTL_OFFEN; + tmp &= ~TMIO_SD_CLKCTL_SCLKEN; + } tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL);
udelay(1000);

Switch CPG settings when transitioning between HS200/HS400/SDR104 and regular modes. This is required for the SCC block to operate correctly.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Masahiro Yamada yamada.masahiro@socionext.com --- drivers/mmc/renesas-sdhi.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c index f4283d055f..fd2a361a6d 100644 --- a/drivers/mmc/renesas-sdhi.c +++ b/drivers/mmc/renesas-sdhi.c @@ -289,9 +289,35 @@ out: } #endif
+static void renesas_sdhi_set_clk(struct udevice *dev) +{ + struct tmio_sd_priv *priv = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); + u32 tmp; + + if (!mmc->clock) + return; + + /* Stop the clock before changing its rate to avoid a glitch signal */ + tmp = tmio_sd_readl(priv, TMIO_SD_CLKCTL); + tmp &= ~TMIO_SD_CLKCTL_SCLKEN; + tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL); + + if ((mmc->selected_mode == UHS_SDR104) || + (mmc->selected_mode == MMC_HS_200)) { + clk_set_rate(&priv->clk, 400000000); + } else { + clk_set_rate(&priv->clk, 200000000); + } +} + static int renesas_sdhi_set_ios(struct udevice *dev) { - int ret = tmio_sd_set_ios(dev); + int ret; + + renesas_sdhi_set_clk(dev); + + ret = tmio_sd_set_ios(dev);
mdelay(10);
participants (1)
-
Marek Vasut