Re: [U-Boot] [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)
What is the status of this patch for getting MCI working on SAM9 CPUs? I am working on a new AT91SAM9G45 board and would like to incorporate it if it is ready for prime time. It is not clear to me who should be signing off on this patch and if they have done so.
If there is work to be done on this and I could help, please let me know. I intend to submit the patches to get my 9G45 board mainlined and this might be a good way for me to start learning the intricacies of making and submitting a proper patch.
Any suggestions will be appreciated.
Thanks, Bill Landolina Technology Atlanta Corporation wcl@techatl.com
William C. Landolina wrote:
What is the status of this patch for getting MCI working on SAM9 CPUs? I am working on a new AT91SAM9G45 board and would like to incorporate it if it is ready for prime time. It is not clear to me who should be signing off on this patch and if they have done so.
The Patch is ready and working for 9260/9XE, I signed it off. Next step is for Eric(Hong) Xu to add it to the at91 custodian git, and finally it to be pulled into mainstream.
If there is work to be done on this and I could help, please let me know. I intend to submit the patches to get my 9G45 board mainlined and this might be a good way for me to start learning the intricacies of making and submitting a proper patch.
For other than 9260/9XE SoCs it should work fine, maybe some defines have to be added to their <at91xxxxx.h> header files, you'll find that out if you try to use ATMEL_MCI there.
Any suggestions will be appreciated.
Soon I will be working on support for more than 4 GB cards.
Reinhard
participants (2)
-
Reinhard Meyer -
William C. Landolina