Dear U-Boot community list members,

I have a NXP i.MX8M Plus EVB which I'm trying to enable Falcon mode in secure boot from QSPI on it. I saw that there is no defconfig file for this boot method (using FlexSPI) so I took imx8mp_evk_defconfig and modified it manually to the attached configuration file (Which does not contain secure boot configurations). I encountered an issue where I'm able to load all the FIT image components (ATF, DTB and Kernel images) into RAM, but after the ATF finished its run, the Kernel doesn't start (When I used the Falcon mode in SD/eMMC boot mode - The Kernel Started its initialization right after ATF run).

Can you please advise what could be the problem? Or what in your opinion is the best (and fastest) way to fix and solve this issue?

Thank you in advance, Nitzan Tavor.

Nitzan Tavor Software Team Leader | R&D Solutions Your Goal. Our Creation www.abra-it.com

This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.