Since commit [1] A53 u-boot proper is broken. This is because nodes marked as 'bootph-pre-ram' are not available at u-boot proper before relocation.

To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'.

[1] 9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")

Reported-by: Roger Quadros rogerq@kernel.org Signed-off-by: Nishanth Menon nm@ti.com ---

Based on Roger's series: https://lore.kernel.org/all/20230929134646.214781-1-rogerq@kernel.org/

Based on: next e29b932aa07f Merge branch '2023-09-30-Kconfig-updates' into next

See discussion thread: https://lore.kernel.org/all/CAPnjgZ3MgWX8T0A0SofphEr_Xd77pE3hte9DNye1RuBVeB9...

arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 70 ++++++++++---------- 1 file changed, 35 insertions(+), 35 deletions(-)

diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi index f8c04e8a300a..d6c6baa5518b 100644 --- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi +++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi @@ -14,143 +14,143 @@ };

memory@80000000 { - bootph-pre-ram; + bootph-all; };

/* Keep the LEDs on by default to indicate life */ leds { - bootph-pre-ram; + bootph-all; led-0 { default-state = "on"; - bootph-pre-ram; + bootph-all; };

led-1 { default-state = "on"; - bootph-pre-ram; + bootph-all; };

led-2 { default-state = "on"; - bootph-pre-ram; + bootph-all; };

led-3 { default-state = "on"; - bootph-pre-ram; + bootph-all; };

led-4 { default-state = "on"; - bootph-pre-ram; + bootph-all; }; }; };

&cbass_main { - bootph-pre-ram; + bootph-all; };

&main_timer0 { clock-frequency = <25000000>; - bootph-pre-ram; + bootph-all; };

&dmss { - bootph-pre-ram; + bootph-all; };

&secure_proxy_main { - bootph-pre-ram; + bootph-all; };

&dmsc { - bootph-pre-ram; + bootph-all; };

&k3_pds { - bootph-pre-ram; + bootph-all; };

&k3_clks { - bootph-pre-ram; + bootph-all; };

&k3_reset { - bootph-pre-ram; + bootph-all; };

&dmsc { - bootph-pre-ram; + bootph-all; k3_sysreset: sysreset-controller { compatible = "ti,sci-sysreset"; - bootph-pre-ram; + bootph-all; }; };

&wkup_conf { - bootph-pre-ram; + bootph-all; };

&chipid { - bootph-pre-ram; + bootph-all; };

&main_pmx0 { - bootph-pre-ram; + bootph-all; };

&main_uart0 { - bootph-pre-ram; + bootph-all; };

&console_pins_default { - bootph-pre-ram; + bootph-all; };

&cbass_mcu { - bootph-pre-ram; + bootph-all; };

&cbass_wakeup { - bootph-pre-ram; + bootph-all; };

&mcu_pmx0 { - bootph-pre-ram; + bootph-all; };

&main_i2c0 { - bootph-pre-ram; + bootph-all; };

&local_i2c_pins_default { - bootph-pre-ram; + bootph-all; };

&gpio0_pins_default { - bootph-pre-ram; + bootph-all; };

&main_gpio0 { - bootph-pre-ram; + bootph-all; };

&main_gpio1 { - bootph-pre-ram; + bootph-all; };

&sdhci0 { /* EMMC */ - bootph-pre-ram; + bootph-all; };

&emmc_pins_default { - bootph-pre-ram; + bootph-all; };

&sd_pins_default { - bootph-pre-ram; + bootph-all; /* Force to use SDCD card detect pin */ pinctrl-single,pins = < AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ @@ -164,11 +164,11 @@ };

&tps65219 { - bootph-pre-ram; + bootph-all; };

&sdhci1 { - bootph-pre-ram; + bootph-all; };

#ifdef CONFIG_TARGET_AM625_A53_EVM