[PATCH v2 0/4] rockchip: rk3399: Add SPI boot
I have marked this series as v2, since the previous one has SPL SPI boot via different defconfig.
Thanks to Hugh Cole-Baker for inputs about SPI boot image creation.
Changes for v2: - same defconfig to support both MMC, SPI boot - add spi flash program document
Any inputs? Jagan.
Jagan Teki (4): Makefile: Drop to handle rkspi image type roc-rk3399-pc: Mark default env from SPI roc-rk3399-pc: Add SPI boot doc: rockchip: Document SPI flash program steps
Makefile | 11 ++-------- arch/arm/dts/rk3399-roc-pc-u-boot.dtsi | 12 ++++++++++- configs/roc-pc-mezzanine-rk3399_defconfig | 3 +++ configs/roc-pc-rk3399_defconfig | 6 +++++- doc/board/rockchip/rockchip.rst | 26 ++++++++++++++++++++++- include/configs/roc-pc-rk3399.h | 4 ---- 6 files changed, 46 insertions(+), 16 deletions(-)
On rockchip platforms, SPI boot image creation is not straightforward like MMC boot image creation where former requires to specify tpl, spl in multimage format in mkimage, and later simply do a concatenate mkimaged-tpl with spl.
On this note, let drop rkspi image type creation via kbuild and let inform via rockchip.rst
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- Makefile | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/Makefile b/Makefile index 3851dd9fa0..db3b6b9991 100644 --- a/Makefile +++ b/Makefile @@ -1438,22 +1438,15 @@ u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
-# rockchip image type -ifeq ($(CONFIG_SPL_SPI_LOAD),y) -ROCKCHIP_IMG_TYPE := rkspi -else -ROCKCHIP_IMG_TYPE := rksd -endif - # TPL + SPL ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy) -MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) +MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE $(call if_changed,mkimage) idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE $(call if_changed,cat) else -MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) +MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd idbloader.img: spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) endif
On 2020/6/2 上午4:42, Jagan Teki wrote:
On rockchip platforms, SPI boot image creation is not straightforward like MMC boot image creation where former requires to specify tpl, spl in multimage format in mkimage, and later simply do a concatenate mkimaged-tpl with spl.
On this note, let drop rkspi image type creation via kbuild and let inform via rockchip.rst
Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
Makefile | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/Makefile b/Makefile index 3851dd9fa0..db3b6b9991 100644 --- a/Makefile +++ b/Makefile @@ -1438,22 +1438,15 @@ u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
-# rockchip image type -ifeq ($(CONFIG_SPL_SPI_LOAD),y) -ROCKCHIP_IMG_TYPE := rkspi -else -ROCKCHIP_IMG_TYPE := rksd -endif
- # TPL + SPL ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
-MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) +MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE $(call if_changed,mkimage) idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE $(call if_changed,cat) else -MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) +MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd idbloader.img: spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) endif
Mark the default U-Boot environment as SPI flash since this is an on board flash device.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- configs/roc-pc-rk3399_defconfig | 3 ++- include/configs/roc-pc-rk3399.h | 4 ---- 2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig index 76e76c160e..18c343f9f9 100644 --- a/configs/roc-pc-rk3399_defconfig +++ b/configs/roc-pc-rk3399_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_ENV_SIZE=0x8000 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_ROCKCHIP_RK3399=y CONFIG_TARGET_ROC_PC_RK3399=y @@ -24,7 +25,7 @@ CONFIG_CMD_TIME=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc" CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" -CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y diff --git a/include/configs/roc-pc-rk3399.h b/include/configs/roc-pc-rk3399.h index d4cbc3532e..59fe22289c 100644 --- a/include/configs/roc-pc-rk3399.h +++ b/include/configs/roc-pc-rk3399.h @@ -13,10 +13,6 @@
#include <configs/rk3399_common.h>
-#if defined(CONFIG_ENV_IS_IN_MMC) -# define CONFIG_SYS_MMC_ENV_DEV 0 -#endif - #define SDRAM_BANK_SIZE (2UL << 30)
#endif
On 2020/6/2 上午4:42, Jagan Teki wrote:
Mark the default U-Boot environment as SPI flash since this is an on board flash device.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
configs/roc-pc-rk3399_defconfig | 3 ++- include/configs/roc-pc-rk3399.h | 4 ---- 2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig index 76e76c160e..18c343f9f9 100644 --- a/configs/roc-pc-rk3399_defconfig +++ b/configs/roc-pc-rk3399_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_ENV_SIZE=0x8000 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_ROCKCHIP_RK3399=y CONFIG_TARGET_ROC_PC_RK3399=y @@ -24,7 +25,7 @@ CONFIG_CMD_TIME=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc" CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" -CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y diff --git a/include/configs/roc-pc-rk3399.h b/include/configs/roc-pc-rk3399.h index d4cbc3532e..59fe22289c 100644 --- a/include/configs/roc-pc-rk3399.h +++ b/include/configs/roc-pc-rk3399.h @@ -13,10 +13,6 @@
#include <configs/rk3399_common.h>
-#if defined(CONFIG_ENV_IS_IN_MMC) -# define CONFIG_SYS_MMC_ENV_DEV 0 -#endif
#define SDRAM_BANK_SIZE (2UL << 30)
#endif
U-Boot TPL 2020.07-rc3-00090-gd4e919f927-dirty (Jun 01 2020 - 23:45:53) Channel 0: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride 256B stride lpddr4_set_rate: change freq to 400000000 mhz 0, 1 lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM Returning to boot ROM...
U-Boot SPL 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530) Trying to boot from MMC1 NOTICE: BL31: v2.2(release): NOTICE: BL31: Built : 15:05:37, May 12 2020
U-Boot 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530)
SoC: Rockchip rk3399 Reset cause: POR Model: Firefly ROC-RK3399-PC Board DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from SPI Flash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Model: Firefly ROC-RK3399-PC Board
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- arch/arm/dts/rk3399-roc-pc-u-boot.dtsi | 12 +++++++++++- configs/roc-pc-mezzanine-rk3399_defconfig | 3 +++ configs/roc-pc-rk3399_defconfig | 3 +++ 3 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi index 141dd0b306..fc155e6903 100644 --- a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi +++ b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi @@ -12,7 +12,11 @@ };
chosen { - u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; + u-boot,spl-boot-order = "same-as-spl", &spi_flash, &sdhci, &sdmmc; + }; + + config { + u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */ };
vcc_hub_en: vcc_hub_en-regulator { @@ -40,6 +44,12 @@ vin-supply = <&vcc_vbus_typec0>; };
+&spi1 { + spi_flash: flash@0 { + u-boot,dm-pre-reloc; + }; +}; + &vdd_log { regulator-min-microvolt = <430000>; regulator-init-microvolt = <950000>; diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig index 1c1539bcb9..4b98dd9cfc 100644 --- a/configs/roc-pc-mezzanine-rk3399_defconfig +++ b/configs/roc-pc-mezzanine-rk3399_defconfig @@ -7,12 +7,15 @@ CONFIG_TARGET_ROC_PC_RK3399=y CONFIG_NR_DRAM_BANKS=1 CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEBUG_UART=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_SPI_LOAD=y CONFIG_TPL=y CONFIG_TPL_GPIO_SUPPORT=y CONFIG_CMD_BOOTZ=y diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig index 18c343f9f9..e5ff570b87 100644 --- a/configs/roc-pc-rk3399_defconfig +++ b/configs/roc-pc-rk3399_defconfig @@ -8,12 +8,15 @@ CONFIG_TARGET_ROC_PC_RK3399=y CONFIG_NR_DRAM_BANKS=1 CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEBUG_UART=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_SPI_LOAD=y CONFIG_TPL=y CONFIG_TPL_GPIO_SUPPORT=y CONFIG_CMD_BOOTZ=y
On 2020/6/2 上午4:42, Jagan Teki wrote:
U-Boot TPL 2020.07-rc3-00090-gd4e919f927-dirty (Jun 01 2020 - 23:45:53) Channel 0: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride 256B stride lpddr4_set_rate: change freq to 400000000 mhz 0, 1 lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM Returning to boot ROM...
U-Boot SPL 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530) Trying to boot from MMC1 NOTICE: BL31: v2.2(release): NOTICE: BL31: Built : 15:05:37, May 12 2020
U-Boot 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530)
SoC: Rockchip rk3399 Reset cause: POR Model: Firefly ROC-RK3399-PC Board DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from SPI Flash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Model: Firefly ROC-RK3399-PC Board
Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
arch/arm/dts/rk3399-roc-pc-u-boot.dtsi | 12 +++++++++++- configs/roc-pc-mezzanine-rk3399_defconfig | 3 +++ configs/roc-pc-rk3399_defconfig | 3 +++ 3 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi index 141dd0b306..fc155e6903 100644 --- a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi +++ b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi @@ -12,7 +12,11 @@ };
chosen {
u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
u-boot,spl-boot-order = "same-as-spl", &spi_flash, &sdhci, &sdmmc;};
config {
u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */};
vcc_hub_en: vcc_hub_en-regulator {
@@ -40,6 +44,12 @@ vin-supply = <&vcc_vbus_typec0>; };
+&spi1 {
- spi_flash: flash@0 {
u-boot,dm-pre-reloc;- };
+};
- &vdd_log { regulator-min-microvolt = <430000>; regulator-init-microvolt = <950000>;
diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig index 1c1539bcb9..4b98dd9cfc 100644 --- a/configs/roc-pc-mezzanine-rk3399_defconfig +++ b/configs/roc-pc-mezzanine-rk3399_defconfig @@ -7,12 +7,15 @@ CONFIG_TARGET_ROC_PC_RK3399=y CONFIG_NR_DRAM_BANKS=1 CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEBUG_UART=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_SPI_LOAD=y CONFIG_TPL=y CONFIG_TPL_GPIO_SUPPORT=y CONFIG_CMD_BOOTZ=y diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig index 18c343f9f9..e5ff570b87 100644 --- a/configs/roc-pc-rk3399_defconfig +++ b/configs/roc-pc-rk3399_defconfig @@ -8,12 +8,15 @@ CONFIG_TARGET_ROC_PC_RK3399=y CONFIG_NR_DRAM_BANKS=1 CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEBUG_UART=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_SPI_LOAD=y CONFIG_TPL=y CONFIG_TPL_GPIO_SUPPORT=y CONFIG_CMD_BOOTZ=y
Document SPI flash program steps for rockchip platforms.
Suggested-by: Hugh Cole-Baker sigmaris@gmail.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- doc/board/rockchip/rockchip.rst | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 7b72fab496..76b228a046 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -162,6 +162,30 @@ Program the flash:: Note: for rockchip 32-bit platforms the U-Boot proper image is u-boot-dtb.img
+SPI +^^^ + +Generating idbloader for SPI boot would require to input a multi image +image format to mkimage tool instead of concerting (like for MMC boot). + +SPL-alone SPI boot image:: + + ./tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader.img + +TPL+SPL SPI boot image:: + + ./tools/mkimage -n rk3399 -T rkspi -d tpl/u-boot-tpl.bin:spl/u-boot-spl.bin idbloader.img + +Copy SPI boot images into SD card and boot from SD:: + + sf probe + load mmc 1:1 $kernel_addr_r idbloader.img + sf erase 0 +$filesize + sf write $kernel_addr_r 0 ${filesize} + load mmc 1:1 ${kernel_addr_r} u-boot.itb + sf erase 0x60000 +$filesize + sf write $kernel_addr_r 0x60000 ${filesize} + TODO ----
@@ -171,4 +195,4 @@ TODO - Add missing SoC's with it boards list
.. Jagan Teki jagan@amarulasolutions.com -.. Sunday 24 May 2020 10:08:41 PM IST +.. Tuesday 02 June 2020 12:18:57 AM IST
On 2020/6/2 上午4:42, Jagan Teki wrote:
Document SPI flash program steps for rockchip platforms.
Suggested-by: Hugh Cole-Baker sigmaris@gmail.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
doc/board/rockchip/rockchip.rst | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 7b72fab496..76b228a046 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -162,6 +162,30 @@ Program the flash:: Note: for rockchip 32-bit platforms the U-Boot proper image is u-boot-dtb.img
+SPI +^^^
+Generating idbloader for SPI boot would require to input a multi image +image format to mkimage tool instead of concerting (like for MMC boot).
+SPL-alone SPI boot image::
./tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader.img+TPL+SPL SPI boot image::
./tools/mkimage -n rk3399 -T rkspi -d tpl/u-boot-tpl.bin:spl/u-boot-spl.bin idbloader.img+Copy SPI boot images into SD card and boot from SD::
sf probeload mmc 1:1 $kernel_addr_r idbloader.imgsf erase 0 +$filesizesf write $kernel_addr_r 0 ${filesize}load mmc 1:1 ${kernel_addr_r} u-boot.itbsf erase 0x60000 +$filesizesf write $kernel_addr_r 0x60000 ${filesize}TODO
@@ -171,4 +195,4 @@ TODO
- Add missing SoC's with it boards list
.. Jagan Teki jagan@amarulasolutions.com -.. Sunday 24 May 2020 10:08:41 PM IST +.. Tuesday 02 June 2020 12:18:57 AM IST
participants (2)
-
Jagan Teki -
Kever Yang