From: Marcin Wojtas mw@semihalf.com

The pcie_dw_mvebu configure ATU regions for memory, configuration and IO space types. However the latter is not obligatory and when not specified in the device tree, causes wrong ATU configuration. Fix that by adding a dependency on the detected PCIE regions count.

Signed-off-by: Marcin Wojtas mw@semihalf.com Reviewed-on: https://sj1git1.cavium.com/18136 Reviewed-by: Kostya Porotchkin kostap@marvell.com Tested-by: Kostya Porotchkin kostap@marvell.com --- drivers/pci/pcie_dw_mvebu.c | 37 +++++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/pcie_dw_mvebu.c b/drivers/pci/pcie_dw_mvebu.c index 93e57cf0cf14..0490fd337705 100644 --- a/drivers/pci/pcie_dw_mvebu.c +++ b/drivers/pci/pcie_dw_mvebu.c @@ -115,6 +115,7 @@ struct pcie_dw_mvebu { int first_busno;

/* IO and MEM PCI regions */ + int region_count; struct pci_region io; struct pci_region mem; }; @@ -267,9 +268,10 @@ static int pcie_dw_mvebu_read_config(const struct udevice *bus, pci_dev_t bdf, debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value); *valuep = pci_conv_32_to_size(value, offset, size);

- pcie_dw_prog_outbound_atu(pcie, PCIE_ATU_REGION_INDEX0, - PCIE_ATU_TYPE_IO, pcie->io.phys_start, - pcie->io.bus_start, pcie->io.size); + if (pcie->region_count > 1) + pcie_dw_prog_outbound_atu(pcie, PCIE_ATU_REGION_INDEX0, + PCIE_ATU_TYPE_IO, pcie->io.phys_start, + pcie->io.bus_start, pcie->io.size);

return 0; } @@ -312,9 +314,10 @@ static int pcie_dw_mvebu_write_config(struct udevice *bus, pci_dev_t bdf, value = pci_conv_size_to_32(old, value, offset, size); writel(value, va_address);

- pcie_dw_prog_outbound_atu(pcie, PCIE_ATU_REGION_INDEX0, - PCIE_ATU_TYPE_IO, pcie->io.phys_start, - pcie->io.bus_start, pcie->io.size); + if (pcie->region_count > 1) + pcie_dw_prog_outbound_atu(pcie, PCIE_ATU_REGION_INDEX0, + PCIE_ATU_TYPE_IO, pcie->io.phys_start, + pcie->io.bus_start, pcie->io.size);

return 0; } @@ -513,14 +516,24 @@ static int pcie_dw_mvebu_probe(struct udevice *dev) hose->first_busno); }

+ pcie->region_count = hose->region_count - CONFIG_NR_DRAM_BANKS; + /* Store the IO and MEM windows settings for future use by the ATU */ - pcie->io.phys_start = hose->regions[0].phys_start; /* IO base */ - pcie->io.bus_start = hose->regions[0].bus_start; /* IO_bus_addr */ - pcie->io.size = hose->regions[0].size; /* IO size */ + if (pcie->region_count > 1) { + /* IO base */ + pcie->io.phys_start = hose->regions[0].phys_start; + /* IO_bus_addr */ + pcie->io.bus_start = hose->regions[0].bus_start; + /* IO size */ + pcie->io.size = hose->regions[0].size; + }

- pcie->mem.phys_start = hose->regions[1].phys_start; /* MEM base */ - pcie->mem.bus_start = hose->regions[1].bus_start; /* MEM_bus_addr */ - pcie->mem.size = hose->regions[1].size; /* MEM size */ + /* MEM base */ + pcie->mem.phys_start = hose->regions[pcie->region_count - 1].phys_start; + /* MEM_bus_addr */ + pcie->mem.bus_start = hose->regions[pcie->region_count - 1].bus_start; + /* MEM size */ + pcie->mem.size = hose->regions[pcie->region_count - 1].size;

pcie_dw_prog_outbound_atu(pcie, PCIE_ATU_REGION_INDEX1, PCIE_ATU_TYPE_MEM, pcie->mem.phys_start,