[U-Boot] [PATCH] arm: omap: configs: various: Remove references to OMAP34XX_UARTx
Two boards include a reference to ti_omap3_common.h which points the UART driver to OMAP34XX_UARTx so the extra define should be unnecessary.
Signed-off-by: Adam Ford aford173@gmail.com --- include/configs/omap3_evm.h | 1 - include/configs/omap3_pandora.h | 1 - 2 files changed, 2 deletions(-)
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 34418309cb..779087a949 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -34,7 +34,6 @@ #define CONFIG_REVISION_TAG
/* Override OMAP3 serial console configuration */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
/* NAND */ #if defined(CONFIG_NAND) diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 68e1d6f82d..1fc40e05ff 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
/* commands to include */
On Tue, Aug 7, 2018, 7:28 AM Adam Ford aford173@gmail.com wrote:
Two boards include a reference to ti_omap3_common.h which points the UART driver to OMAP34XX_UARTx so the extra define should be unnecessary.
A patch has already been submitted for OMAP3 EVM.
Derald
Signed-off-by: Adam Ford aford173@gmail.com
include/configs/omap3_evm.h | 1 - include/configs/omap3_pandora.h | 1 - 2 files changed, 2 deletions(-)
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 34418309cb..779087a949 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -34,7 +34,6 @@ #define CONFIG_REVISION_TAG
/* Override OMAP3 serial console configuration */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
/* NAND */ #if defined(CONFIG_NAND) diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 68e1d6f82d..1fc40e05ff 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
/* commands to include */
-- 2.17.1
On Tue, Aug 07, 2018 at 07:28:11AM -0500, Adam Ford wrote:
Two boards include a reference to ti_omap3_common.h which points the UART driver to OMAP34XX_UARTx so the extra define should be unnecessary.
Signed-off-by: Adam Ford aford173@gmail.com
include/configs/omap3_evm.h | 1 - include/configs/omap3_pandora.h | 1 - 2 files changed, 2 deletions(-)
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 34418309cb..779087a949 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -34,7 +34,6 @@ #define CONFIG_REVISION_TAG
/* Override OMAP3 serial console configuration */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
/* NAND */ #if defined(CONFIG_NAND) diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 68e1d6f82d..1fc40e05ff 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
/* commands to include */
This results in: +(omap3_pandora) ../drivers/serial/serial_ns16550.c:31:2: error: #error "Console port 3 defined but not configured." +(omap3_pandora) #error "Console port 3 defined but not configured." +(omap3_pandora) ^~~~~ +(omap3_pandora) make[2]: *** [../scripts/Makefile.build:279: drivers/serial/serial_ns16550.o] Error 1 +(omap3_pandora) make[1]: *** [Makefile:1373: drivers/serial] Error 2
On Mon, Aug 20, 2018 at 6:21 AM Tom Rini trini@konsulko.com wrote:
On Tue, Aug 07, 2018 at 07:28:11AM -0500, Adam Ford wrote:
Two boards include a reference to ti_omap3_common.h which points the UART driver to OMAP34XX_UARTx so the extra define should be unnecessary.
Signed-off-by: Adam Ford aford173@gmail.com
include/configs/omap3_evm.h | 1 - include/configs/omap3_pandora.h | 1 - 2 files changed, 2 deletions(-)
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 34418309cb..779087a949 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -34,7 +34,6 @@ #define CONFIG_REVISION_TAG
/* Override OMAP3 serial console configuration */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
/* NAND */ #if defined(CONFIG_NAND) diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 68e1d6f82d..1fc40e05ff 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
/* commands to include */
This results in: +(omap3_pandora) ../drivers/serial/serial_ns16550.c:31:2: error: #error "Console port 3 defined but not configured." +(omap3_pandora) #error "Console port 3 defined but not configured." +(omap3_pandora) ^~~~~ +(omap3_pandora) make[2]: *** [../scripts/Makefile.build:279: drivers/serial/serial_ns16550.o] Error 1 +(omap3_pandora) make[1]: *** [Makefile:1373: drivers/serial] Error 2
argh. I made the assumption that people who include ti_omap3_common.h migrated to DM. I could go back and modify ti_omap3_common.h to wrap the CONFIG_SYS_NS16550_COMx entries under #if !defined(DM_SERIAL) instead of CONFIG_SPL_BUILD
Do you have an opinion? I may not get back to this before I leave on my trip, but I can take a look again in 2 weeks when I return.
Wasn't there a requirement that we need to move all boards to support CONFIG_DM at one point?
adam
-- Tom
On Mon, Aug 20, 2018 at 07:45:16AM -0500, Adam Ford wrote:
On Mon, Aug 20, 2018 at 6:21 AM Tom Rini trini@konsulko.com wrote:
On Tue, Aug 07, 2018 at 07:28:11AM -0500, Adam Ford wrote:
Two boards include a reference to ti_omap3_common.h which points the UART driver to OMAP34XX_UARTx so the extra define should be unnecessary.
Signed-off-by: Adam Ford aford173@gmail.com
include/configs/omap3_evm.h | 1 - include/configs/omap3_pandora.h | 1 - 2 files changed, 2 deletions(-)
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 34418309cb..779087a949 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -34,7 +34,6 @@ #define CONFIG_REVISION_TAG
/* Override OMAP3 serial console configuration */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
/* NAND */ #if defined(CONFIG_NAND) diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 68e1d6f82d..1fc40e05ff 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
/* commands to include */
This results in: +(omap3_pandora) ../drivers/serial/serial_ns16550.c:31:2: error: #error "Console port 3 defined but not configured." +(omap3_pandora) #error "Console port 3 defined but not configured." +(omap3_pandora) ^~~~~ +(omap3_pandora) make[2]: *** [../scripts/Makefile.build:279: drivers/serial/serial_ns16550.o] Error 1 +(omap3_pandora) make[1]: *** [Makefile:1373: drivers/serial] Error 2
argh. I made the assumption that people who include ti_omap3_common.h migrated to DM. I could go back and modify ti_omap3_common.h to wrap the CONFIG_SYS_NS16550_COMx entries under #if !defined(DM_SERIAL) instead of CONFIG_SPL_BUILD
Do you have an opinion? I may not get back to this before I leave on my trip, but I can take a look again in 2 weeks when I return.
Wasn't there a requirement that we need to move all boards to support CONFIG_DM at one point?
Yes, things should get moved to DM. So, adding the omap3_pandora listed maintainer to the email.
On Mon, Aug 20, 2018 at 8:43 PM, Tom Rini trini@konsulko.com wrote:
On Mon, Aug 20, 2018 at 07:45:16AM -0500, Adam Ford wrote:
On Mon, Aug 20, 2018 at 6:21 AM Tom Rini trini@konsulko.com wrote:
On Tue, Aug 07, 2018 at 07:28:11AM -0500, Adam Ford wrote:
Two boards include a reference to ti_omap3_common.h which points the UART driver to OMAP34XX_UARTx so the extra define should be unnecessary.
Signed-off-by: Adam Ford aford173@gmail.com
include/configs/omap3_evm.h | 1 - include/configs/omap3_pandora.h | 1 - 2 files changed, 2 deletions(-)
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 34418309cb..779087a949 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -34,7 +34,6 @@ #define CONFIG_REVISION_TAG
/* Override OMAP3 serial console configuration */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
/* NAND */ #if defined(CONFIG_NAND) diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 68e1d6f82d..1fc40e05ff 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
/* commands to include */
This results in: +(omap3_pandora) ../drivers/serial/serial_ns16550.c:31:2: error: #error "Console port 3 defined but not configured." +(omap3_pandora) #error "Console port 3 defined but not configured." +(omap3_pandora) ^~~~~ +(omap3_pandora) make[2]: *** [../scripts/Makefile.build:279: drivers/serial/serial_ns16550.o] Error 1 +(omap3_pandora) make[1]: *** [Makefile:1373: drivers/serial] Error 2
argh. I made the assumption that people who include ti_omap3_common.h migrated to DM. I could go back and modify ti_omap3_common.h to wrap the CONFIG_SYS_NS16550_COMx entries under #if !defined(DM_SERIAL) instead of CONFIG_SPL_BUILD
Do you have an opinion? I may not get back to this before I leave on my trip, but I can take a look again in 2 weeks when I return.
Wasn't there a requirement that we need to move all boards to support CONFIG_DM at one point?
Yes, things should get moved to DM. So, adding the omap3_pandora listed maintainer to the email.
I'm sorry I haven't been following u-boot development for some years, what exactly needs to be done here? I've tried enabling CONFIG_DM_SERIAL, but then the board only prints some garbage and resets. Without changes current u-boot built from git boots fine.
Note that the device is old and only pre- device tree kernels are shipped and officially supported. However the mainline kernel still has incomplete board support (including device tree) for those wanting to use it.
Gražvydas
On Sat, Aug 25, 2018 at 06:58:19PM +0300, Grazvydas Ignotas wrote:
On Mon, Aug 20, 2018 at 8:43 PM, Tom Rini trini@konsulko.com wrote:
On Mon, Aug 20, 2018 at 07:45:16AM -0500, Adam Ford wrote:
On Mon, Aug 20, 2018 at 6:21 AM Tom Rini trini@konsulko.com wrote:
On Tue, Aug 07, 2018 at 07:28:11AM -0500, Adam Ford wrote:
Two boards include a reference to ti_omap3_common.h which points the UART driver to OMAP34XX_UARTx so the extra define should be unnecessary.
Signed-off-by: Adam Ford aford173@gmail.com
include/configs/omap3_evm.h | 1 - include/configs/omap3_pandora.h | 1 - 2 files changed, 2 deletions(-)
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 34418309cb..779087a949 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -34,7 +34,6 @@ #define CONFIG_REVISION_TAG
/* Override OMAP3 serial console configuration */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
/* NAND */ #if defined(CONFIG_NAND) diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 68e1d6f82d..1fc40e05ff 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
/* commands to include */
This results in: +(omap3_pandora) ../drivers/serial/serial_ns16550.c:31:2: error: #error "Console port 3 defined but not configured." +(omap3_pandora) #error "Console port 3 defined but not configured." +(omap3_pandora) ^~~~~ +(omap3_pandora) make[2]: *** [../scripts/Makefile.build:279: drivers/serial/serial_ns16550.o] Error 1 +(omap3_pandora) make[1]: *** [Makefile:1373: drivers/serial] Error 2
argh. I made the assumption that people who include ti_omap3_common.h migrated to DM. I could go back and modify ti_omap3_common.h to wrap the CONFIG_SYS_NS16550_COMx entries under #if !defined(DM_SERIAL) instead of CONFIG_SPL_BUILD
Do you have an opinion? I may not get back to this before I leave on my trip, but I can take a look again in 2 weeks when I return.
Wasn't there a requirement that we need to move all boards to support CONFIG_DM at one point?
Yes, things should get moved to DM. So, adding the omap3_pandora listed maintainer to the email.
I'm sorry I haven't been following u-boot development for some years, what exactly needs to be done here? I've tried enabling CONFIG_DM_SERIAL, but then the board only prints some garbage and resets. Without changes current u-boot built from git boots fine.
Note that the device is old and only pre- device tree kernels are shipped and officially supported. However the mainline kernel still has incomplete board support (including device tree) for those wanting to use it.
So over in U-Boot, we're moving towards the point where having some device tree that describes the board will be a lot easier than not in terms of continuing to support the board. So, there's a few ways to look at things: - If you take a look at 0d43fded20e3 you can see how omap3_evm was updated to use DM_SERIAL and a bunch of other modern things. - You can also just say that it's time to retire omap3_pandora from mainline U-Boot and that v2018.09 (or v2018.11, but I don't want to wait too long) is the last release with support for the platform. - See if there's anyone else you know that would like to pick up and maintain the board and make the kind of changes that were made to omap3_evm.
On Sat, Aug 25, 2018 at 7:22 PM, Tom Rini trini@konsulko.com wrote:
On Sat, Aug 25, 2018 at 06:58:19PM +0300, Grazvydas Ignotas wrote:
On Mon, Aug 20, 2018 at 8:43 PM, Tom Rini trini@konsulko.com wrote:
On Mon, Aug 20, 2018 at 07:45:16AM -0500, Adam Ford wrote:
On Mon, Aug 20, 2018 at 6:21 AM Tom Rini trini@konsulko.com wrote:
On Tue, Aug 07, 2018 at 07:28:11AM -0500, Adam Ford wrote:
Wasn't there a requirement that we need to move all boards to support CONFIG_DM at one point?
Yes, things should get moved to DM. So, adding the omap3_pandora listed maintainer to the email.
I'm sorry I haven't been following u-boot development for some years, what exactly needs to be done here? I've tried enabling CONFIG_DM_SERIAL, but then the board only prints some garbage and resets. Without changes current u-boot built from git boots fine.
Note that the device is old and only pre- device tree kernels are shipped and officially supported. However the mainline kernel still has incomplete board support (including device tree) for those wanting to use it.
So over in U-Boot, we're moving towards the point where having some device tree that describes the board will be a lot easier than not in terms of continuing to support the board. So, there's a few ways to look at things:
- If you take a look at 0d43fded20e3 you can see how omap3_evm was updated to use DM_SERIAL and a bunch of other modern things.
- You can also just say that it's time to retire omap3_pandora from mainline U-Boot and that v2018.09 (or v2018.11, but I don't want to wait too long) is the last release with support for the platform.
- See if there's anyone else you know that would like to pick up and maintain the board and make the kind of changes that were made to omap3_evm.
Thanks for the info. I've sent a patch, I hope it is sufficient.
Gražvydas
On Sat, Aug 25, 2018 at 10:44:28PM +0300, Grazvydas Ignotas wrote:
On Sat, Aug 25, 2018 at 7:22 PM, Tom Rini trini@konsulko.com wrote:
On Sat, Aug 25, 2018 at 06:58:19PM +0300, Grazvydas Ignotas wrote:
On Mon, Aug 20, 2018 at 8:43 PM, Tom Rini trini@konsulko.com wrote:
On Mon, Aug 20, 2018 at 07:45:16AM -0500, Adam Ford wrote:
On Mon, Aug 20, 2018 at 6:21 AM Tom Rini trini@konsulko.com wrote:
On Tue, Aug 07, 2018 at 07:28:11AM -0500, Adam Ford wrote:
Wasn't there a requirement that we need to move all boards to support CONFIG_DM at one point?
Yes, things should get moved to DM. So, adding the omap3_pandora listed maintainer to the email.
I'm sorry I haven't been following u-boot development for some years, what exactly needs to be done here? I've tried enabling CONFIG_DM_SERIAL, but then the board only prints some garbage and resets. Without changes current u-boot built from git boots fine.
Note that the device is old and only pre- device tree kernels are shipped and officially supported. However the mainline kernel still has incomplete board support (including device tree) for those wanting to use it.
So over in U-Boot, we're moving towards the point where having some device tree that describes the board will be a lot easier than not in terms of continuing to support the board. So, there's a few ways to look at things:
- If you take a look at 0d43fded20e3 you can see how omap3_evm was updated to use DM_SERIAL and a bunch of other modern things.
- You can also just say that it's time to retire omap3_pandora from mainline U-Boot and that v2018.09 (or v2018.11, but I don't want to wait too long) is the last release with support for the platform.
- See if there's anyone else you know that would like to pick up and maintain the board and make the kind of changes that were made to omap3_evm.
Thanks for the info. I've sent a patch, I hope it is sufficient.
Works for me, thanks!
participants (4)
-
Adam Ford -
Derald Woods -
Grazvydas Ignotas -
Tom Rini