[U-Boot] [PATCH] imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure
From: Ye Li ye.li@nxp.com
The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card. Fixed the value to correct one.
The issue was fixed in 2014.04 u-boot, but that patch seems missed during porting to 2015.04.
Signed-off-by: Ye Li ye.li@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com --- board/freescale/mx6sabresd/mx6sabresd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index d20953d..42f89ab 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -638,7 +638,7 @@ static const struct boot_mode board_boot_modes[] = { {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, /* 8 bit bus width */ - {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)}, {NULL, 0}, }; #endif
Hi Peng,
On Fri, Jan 29, 2016 at 12:39 AM, Peng Fan van.freenix@gmail.com wrote:
From: Ye Li ye.li@nxp.com
The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card. Fixed the value to correct one.
The issue was fixed in 2014.04 u-boot, but that patch seems missed during porting to 2015.04.
I would remove this last sentence as it applies to NXP U-boot release, right?
Otherwise the patch looks good.
On 29/01/2016 03:39, Peng Fan wrote:
From: Ye Li ye.li@nxp.com
The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card. Fixed the value to correct one.
The issue was fixed in 2014.04 u-boot, but that patch seems missed during porting to 2015.04.
Signed-off-by: Ye Li ye.li@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com
board/freescale/mx6sabresd/mx6sabresd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index d20953d..42f89ab 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -638,7 +638,7 @@ static const struct boot_mode board_boot_modes[] = { {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, /* 8 bit bus width */
- {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
- {"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)}, {NULL, 0},
}; #endif
Reviewed-by: Stefano Babic sbabic@denx.de
Best regards, Stefano Babic
participants (3)
-
Fabio Estevam -
Peng Fan -
Stefano Babic