This board has been orphan for a while. (Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up the maintainership on it.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Wolfgang Denx wd@denx.de ---

README | 8 - arch/powerpc/cpu/mpc8260/pci.c | 2 - arch/powerpc/cpu/mpc8260/start.S | 13 - board/freescale/mpc8260ads/Makefile | 8 - board/freescale/mpc8260ads/flash.c | 476 --------------------------- board/freescale/mpc8260ads/mpc8260ads.c | 544 ------------------------------- boards.cfg | 16 - doc/README.scrapyard | 1 + include/configs/MPC8260ADS.h | 549 -------------------------------- 9 files changed, 1 insertion(+), 1616 deletions(-) delete mode 100644 board/freescale/mpc8260ads/Makefile delete mode 100644 board/freescale/mpc8260ads/flash.c delete mode 100644 board/freescale/mpc8260ads/mpc8260ads.c delete mode 100644 include/configs/MPC8260ADS.h

diff --git a/README b/README index a280435..6edb2e7 100644 --- a/README +++ b/README @@ -321,14 +321,6 @@ The following options need to be configured: the LCD display every second with a "rotator" |-/|-/

-- Board flavour: (if CONFIG_MPC8260ADS is defined) - CONFIG_ADSTYPE - Possible values are: - CONFIG_SYS_8260ADS - original MPC8260ADS - CONFIG_SYS_8266ADS - MPC8266ADS - CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR - CONFIG_SYS_8272ADS - MPC8272ADS - - Marvell Family Member CONFIG_SYS_MVFS - define it if you want to enable multiple fs option at one time diff --git a/arch/powerpc/cpu/mpc8260/pci.c b/arch/powerpc/cpu/mpc8260/pci.c index 2c013bb..0a47fdc 100644 --- a/arch/powerpc/cpu/mpc8260/pci.c +++ b/arch/powerpc/cpu/mpc8260/pci.c @@ -242,8 +242,6 @@ void pci_mpc8250_init (struct pci_controller *hose) immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11) | SIUMCR_LBPC01; -#elif defined(CONFIG_ADSTYPE) && CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS -/* nothing to do for this board here */ #elif defined CONFIG_MPC8272 immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_BBD & diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S index 324f132..d7eaf13 100644 --- a/arch/powerpc/cpu/mpc8260/start.S +++ b/arch/powerpc/cpu/mpc8260/start.S @@ -137,19 +137,6 @@ _hrcw_table:

.globl _start _start: -#if defined(CONFIG_MPC8260ADS) && defined(CONFIG_SYS_DEFAULT_IMMR) - lis r3, CONFIG_SYS_DEFAULT_IMMR@h - nop - lwz r4, 0(r3) - nop - rlwinm r4, r4, 0, 8, 5 - nop - oris r4, r4, 0x0200 - nop - stw r4, 0(r3) - nop -#endif /* CONFIG_MPC8260ADS && CONFIG_SYS_DEFAULT_IMMR */ - mfmsr r5 /* save msr contents */

#if defined(CONFIG_COGENT) diff --git a/board/freescale/mpc8260ads/Makefile b/board/freescale/mpc8260ads/Makefile deleted file mode 100644 index 007d958..0000000 --- a/board/freescale/mpc8260ads/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := mpc8260ads.o flash.o diff --git a/board/freescale/mpc8260ads/flash.c b/board/freescale/mpc8260ads/flash.c deleted file mode 100644 index 4012d45..0000000 --- a/board/freescale/mpc8260ads/flash.c +++ /dev/null @@ -1,476 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com - * Add support the Sharp chips on the mpc8260ads. - * I started with board/ip860/flash.c and made changes I found in - * the MTD project by David Schleef. - * - * (C) Copyright 2003 Arabella Software Ltd. - * Yuli Barcohen yuli@arabellasw.com - * Re-written to support multi-bank flash SIMMs. - * Added support for real protection and JFFS2. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -/* Intel-compatible flash ID */ -#define INTEL_COMPAT 0x89898989 -#define INTEL_ALT 0xB0B0B0B0 - -/* Intel-compatible flash commands */ -#define INTEL_PROGRAM 0x10101010 -#define INTEL_ERASE 0x20202020 -#define INTEL_CLEAR 0x50505050 -#define INTEL_LOCKBIT 0x60606060 -#define INTEL_PROTECT 0x01010101 -#define INTEL_STATUS 0x70707070 -#define INTEL_READID 0x90909090 -#define INTEL_CONFIRM 0xD0D0D0D0 -#define INTEL_RESET 0xFFFFFFFF - -/* Intel-compatible flash status bits */ -#define INTEL_FINISHED 0x80808080 -#define INTEL_OK 0x80808080 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * This board supports 32-bit wide flash SIMMs (4x8-bit configuration.) - * Up to 32MB of flash supported (up to 4 banks.) - * BCSR is used for flash presence detect (page 4-65 of the User's Manual) - * - * The following code can not run from flash! - */ -unsigned long flash_init (void) -{ - ulong size = 0, sect_start, sect_size = 0, bank_size; - ushort sect_count = 0; - int i, j, nbanks; - vu_long *addr = (vu_long *)CONFIG_SYS_FLASH_BASE; - vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR; - - switch (bcsr[2] & 0xF) { - case 0: - nbanks = 4; - break; - case 1: - nbanks = 2; - break; - case 2: - nbanks = 1; - break; - default: /* Unsupported configurations */ - nbanks = CONFIG_SYS_MAX_FLASH_BANKS; - } - - if (nbanks > CONFIG_SYS_MAX_FLASH_BANKS) - nbanks = CONFIG_SYS_MAX_FLASH_BANKS; - - for (i = 0; i < nbanks; i++) { - *addr = INTEL_READID; /* Read Intelligent Identifier */ - if ((addr[0] == INTEL_COMPAT) || (addr[0] == INTEL_ALT)) { - switch (addr[1]) { - case SHARP_ID_28F016SCL: - case SHARP_ID_28F016SCZ: - flash_info[i].flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT; - sect_count = 32; - sect_size = 0x40000; - break; - default: - flash_info[i].flash_id = FLASH_UNKNOWN; - sect_count = CONFIG_SYS_MAX_FLASH_SECT; - sect_size = - CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS / CONFIG_SYS_MAX_FLASH_SECT; - } - } - else - flash_info[i].flash_id = FLASH_UNKNOWN; - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf("### Unknown flash ID %08lX %08lX at address %08lX ###\n", - addr[0], addr[1], (ulong)addr); - size = 0; - *addr = INTEL_RESET; /* Reset bank to Read Array mode */ - break; - } - flash_info[i].sector_count = sect_count; - flash_info[i].size = bank_size = sect_size * sect_count; - size += bank_size; - sect_start = (ulong)addr; - for (j = 0; j < sect_count; j++) { - addr = (vu_long *)sect_start; - flash_info[i].start[j] = sect_start; - flash_info[i].protect[j] = (addr[2] == 0x01010101); - sect_start += sect_size; - } - *addr = INTEL_RESET; /* Reset bank to Read Array mode */ - addr = (vu_long *)sect_start; - } - - if (size == 0) { /* Unknown flash, fill with hard-coded values */ - sect_start = CONFIG_SYS_FLASH_BASE; - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].size = CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS; - flash_info[i].sector_count = sect_count; - for (j = 0; j < sect_count; j++) { - flash_info[i].start[j] = sect_start; - flash_info[i].protect[j] = 0; - sect_start += sect_size; - } - } - size = CONFIG_SYS_FLASH_SIZE; - } - else - for (i = nbanks; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].size = 0; - flash_info[i].sector_count = 0; - } - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[0]); -#endif - return (size); -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: printf ("Intel "); break; - case FLASH_MAN_SHARP: printf ("Sharp "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n"); - break; - case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n"); - break; - case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n"); - break; - case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) - && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - vu_long *addr = (vu_long *)(info->start[sect]); - - last = start = get_timer (0); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Clear Status Register */ - *addr = INTEL_CLEAR; - /* Single Block Erase Command */ - *addr = INTEL_ERASE; - /* Confirm */ - *addr = INTEL_CONFIRM; - - if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) { - /* Resume Command, as per errata update */ - *addr = INTEL_CONFIRM; - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = INTEL_RESET; /* reset bank */ - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - - if (*addr != INTEL_OK) { - printf("Block erase failed at %08X, CSR=%08X\n", - (uint)addr, (uint)*addr); - *addr = INTEL_RESET; /* reset bank */ - return 1; - } - - /* reset to read mode */ - *addr = INTEL_RESET; - } - } - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - ulong start; - int rc = 0; - int flag; - vu_long *addr = (vu_long *)dest; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - return (2); - } - - *addr = INTEL_CLEAR; /* Clear status register */ - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Write Command */ - *addr = INTEL_PROGRAM; - - /* Write Data */ - *addr = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - printf("Write timed out\n"); - rc = 1; - break; - } - } - if (*addr != INTEL_OK) { - printf ("Write failed at %08X, CSR=%08X\n", (uint)addr, (uint)*addr); - rc = 1; - } - - *addr = INTEL_RESET; /* Reset to read array mode */ - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - *(vu_long *)wp = INTEL_RESET; /* Reset to read array mode */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - rc = write_word(info, wp, data); - - return rc; -} - -/*----------------------------------------------------------------------- - * Set/Clear sector's lock bit, returns: - * 0 - OK - * 1 - Error (timeout, voltage problems, etc.) - */ -int flash_real_protect(flash_info_t *info, long sector, int prot) -{ - ulong start; - int i; - int rc = 0; - vu_long *addr = (vu_long *)(info->start[sector]); - int flag = disable_interrupts(); - - *addr = INTEL_CLEAR; /* Clear status register */ - if (prot) { /* Set sector lock bit */ - *addr = INTEL_LOCKBIT; /* Sector lock bit */ - *addr = INTEL_PROTECT; /* set */ - } - else { /* Clear sector lock bit */ - *addr = INTEL_LOCKBIT; /* All sectors lock bits */ - *addr = INTEL_CONFIRM; /* clear */ - } - - start = get_timer(0); - while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { - printf("Flash lock bit operation timed out\n"); - rc = 1; - break; - } - } - - if (*addr != INTEL_OK) { - printf("Flash lock bit operation failed at %08X, CSR=%08X\n", - (uint)addr, (uint)*addr); - rc = 1; - } - - if (!rc) - info->protect[sector] = prot; - - /* - * Clear lock bit command clears all sectors lock bits, so - * we have to restore lock bits of protected sectors. - */ - if (!prot) - for (i = 0; i < info->sector_count; i++) - if (info->protect[i]) { - addr = (vu_long *)(info->start[i]); - *addr = INTEL_LOCKBIT; /* Sector lock bit */ - *addr = INTEL_PROTECT; /* set */ - udelay(CONFIG_SYS_FLASH_LOCK_TOUT * 1000); - } - - if (flag) - enable_interrupts(); - - *addr = INTEL_RESET; /* Reset to read array mode */ - - return rc; -} diff --git a/board/freescale/mpc8260ads/mpc8260ads.c b/board/freescale/mpc8260ads/mpc8260ads.c deleted file mode 100644 index b8c8ce9..0000000 --- a/board/freescale/mpc8260ads/mpc8260ads.c +++ /dev/null @@ -1,544 +0,0 @@ -/* - * (C) Copyright 2001-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Modified during 2001 by - * Advanced Communications Technologies (Australia) Pty. Ltd. - * Howard Walker, Tuong Vu-Dinh - * - * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com - * Added support for the 16M dram simm on the 8260ads boards - * - * (C) Copyright 2003-2004 Arabella Software Ltd. - * Yuli Barcohen yuli@arabellasw.com - * Added support for SDRAM DIMMs SPD EEPROM, MII, Ethernet PHY init. - * - * Copyright (c) 2005 MontaVista Software, Inc. - * Vitaly Bordug vbordug@ru.mvista.com - * Added support for PCI. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <ioports.h> -#include <mpc8260.h> -#include <asm/m8260_pci.h> -#include <i2c.h> -#include <spd.h> -#include <miiphy.h> -#ifdef CONFIG_PCI -#include <pci.h> -#endif -#ifdef CONFIG_OF_LIBFDT -#include <libfdt.h> -#include <fdt_support.h> -#endif - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1) -#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2) -#define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3) - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ - /* PA30 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ - /* PA29 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ - /* PA28 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ - /* PA27 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ - /* PA26 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ - /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */ - /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */ - /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */ - /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */ - /* PA21 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ - /* PA20 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ - /* PA19 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ - /* PA18 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ - /* PA17 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ - /* PA16 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ - /* PA15 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ - /* PA14 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ - /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */ - /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */ - /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */ - /* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */ - /* PA9 */ { 0, 0, 0, 0, 0, 0 }, /* PA9 */ - /* PA8 */ { 0, 0, 0, 0, 0, 0 }, /* PA8 */ - /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */ - /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ - /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ - /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { CONFIG_SYS_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ - /* PB16 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ - /* PB15 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ - /* PB14 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ - /* PB13 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:COL */ - /* PB12 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ - /* PB11 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB10 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB9 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB8 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB7 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB6 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB5 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB4 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */ - /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ - /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ - /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ - /* PC22 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII Tx Clock (CLK10) */ - /* PC21 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII Rx Clock (CLK11) */ - /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */ -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS - /* PC19 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */ - /* PC18 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */ - /* PC17 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK15) */ - /* PC16 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK16) */ -#else - /* PC19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK13) */ - /* PC18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK14) */ - /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ - /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ - /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS - /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ - /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* PC9 */ -#else - /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */ - /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */ -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ - /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ - /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ - /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ - /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 UART RxD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 UART TxD */ - /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */ - /* PD28 */ { 0, 1, 0, 0, 0, 0 }, /* PD28 */ - /* PD27 */ { 0, 1, 1, 1, 0, 0 }, /* PD27 */ - /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ - /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ - /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - } -}; - -void reset_phy (void) -{ - vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR; - - /* Reset the PHY */ -#if CONFIG_SYS_PHY_ADDR == 0 - bcsr[1] &= ~(FETHIEN1 | FETH1_RST); - udelay(2); - bcsr[1] |= FETH1_RST; -#else - bcsr[3] &= ~(FETHIEN2 | FETH2_RST); - udelay(2); - bcsr[3] |= FETH2_RST; -#endif /* CONFIG_SYS_PHY_ADDR == 0 */ - udelay(1000); -#ifdef CONFIG_MII -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS - /* - * Do not bypass Rx/Tx (de)scrambler (fix configuration error) - * Enable autonegotiation. - */ - bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, 16, 0x610); - bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR, - BMCR_ANENABLE | BMCR_ANRESTART); -#else - /* - * Ethernet PHY is configured (by means of configuration pins) - * to work at 10Mb/s only. We reconfigure it using MII - * to advertise all capabilities, including 100Mb/s, and - * restart autonegotiation. - */ - - /* Advertise all capabilities */ - bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_ADVERTISE, 0x01E1); - - /* Do not bypass Rx/Tx (de)scrambler */ - bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_FCSCOUNTER, 0x0000); - - bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR, - BMCR_ANENABLE | BMCR_ANRESTART); -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ -#endif /* CONFIG_MII */ -} - -#ifdef CONFIG_PCI -typedef struct pci_ic_s { - unsigned long pci_int_stat; - unsigned long pci_int_mask; -}pci_ic_t; -#endif - -int board_early_init_f (void) -{ - vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR; - -#ifdef CONFIG_PCI - volatile pci_ic_t* pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT; - - /* mask alll the PCI interrupts */ - pci_ic->pci_int_mask |= 0xfff00000; -#endif -#if (CONFIG_CONS_INDEX == 1) || (CONFIG_KGDB_INDEX == 1) - bcsr[1] &= ~RS232EN_1; -#endif -#if (CONFIG_CONS_INDEX > 1) || (CONFIG_KGDB_INDEX > 1) - bcsr[1] &= ~RS232EN_2; -#endif - -#if CONFIG_ADSTYPE != CONFIG_SYS_8260ADS /* PCI mode can be selected */ -#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS - if ((bcsr[3] & BCSR_PCI_MODE) == 0) /* PCI mode selected by JP9 */ -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ - { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN; - immap->im_siu_conf.sc_siumcr = - (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11) - | SIUMCR_LBPC01; - } -#endif /* CONFIG_ADSTYPE != CONFIG_SYS_8260ADS */ - - return 0; -} - -#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1) - -phys_size_t initdram (int board_type) -{ -#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS - long int msize = 32; -#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS - long int msize = 64; -#else - long int msize = 16; -#endif - -#ifndef CONFIG_SYS_RAMBOOT - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - volatile uchar *ramaddr, c = 0xff; - uint or; - uint psdmr; - uint psrt; - - int i; - - immap->im_siu_conf.sc_ppc_acr = 0x00000002; - immap->im_siu_conf.sc_ppc_alrh = 0x01267893; - immap->im_siu_conf.sc_tescr1 = 0x00004000; - - memctl->memc_mptpr = CONFIG_SYS_MPTPR; -#ifdef CONFIG_SYS_LSDRAM_BASE - /* - Initialise local bus SDRAM only if the pins - are configured as local bus pins and not as PCI. - The configuration is determined by the HRCW. - */ - if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) { - memctl->memc_lsrt = CONFIG_SYS_LSRT; -#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS /* CS3 */ - memctl->memc_or3 = 0xFF803280; - memctl->memc_br3 = CONFIG_SYS_LSDRAM_BASE | 0x00001861; -#else /* CS4 */ - memctl->memc_or4 = 0xFFC01480; - memctl->memc_br4 = CONFIG_SYS_LSDRAM_BASE | 0x00001861; -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ - memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000; - ramaddr = (uchar *) CONFIG_SYS_LSDRAM_BASE; - *ramaddr = c; - memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000; - for (i = 0; i < 8; i++) - *ramaddr = c; - memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000; - *ramaddr = c; - memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000; - } -#endif /* CONFIG_SYS_LSDRAM_BASE */ - - /* Init 60x bus SDRAM */ -#ifdef CONFIG_SPD_EEPROM - { - spd_eeprom_t spd; - uint pbi, bsel, rowst, lsb, tmp; - - i2c_read (CONFIG_SPD_ADDR, 0, 1, (uchar *) & spd, sizeof (spd)); - - /* Bank-based interleaving is not supported for physical bank - sizes greater than 128MB which is encoded as 0x20 in SPD - */ - pbi = (spd.row_dens > 32) ? 1 : CONFIG_SDRAM_PBI; - msize = spd.nrows * (4 * spd.row_dens); /* Mixed size not supported */ - or = ~(msize - 1) << 20; /* SDAM */ - switch (spd.nbanks) { /* BPD */ - case 2: - bsel = 1; - break; - case 4: - bsel = 2; - or |= 0x00002000; - break; - case 8: - bsel = 3; - or |= 0x00004000; - break; - } - lsb = 3; /* For 64-bit port, lsb is 3 bits */ - - if (pbi) { /* Bus partition depends on interleaving */ - rowst = 32 - (spd.nrow_addr + spd.ncol_addr + bsel + lsb); - or |= (rowst << 9); /* ROWST */ - } else { - rowst = 32 - (spd.nrow_addr + spd.ncol_addr + lsb); - or |= ((rowst * 2 - 12) << 9); /* ROWST */ - } - or |= ((spd.nrow_addr - 9) << 6); /* NUMR */ - - psdmr = (pbi << 31); /* PBI */ - /* Bus multiplexing parameters */ - tmp = 32 - (lsb + spd.nrow_addr); /* Tables 10-19 and 10-20 */ - psdmr |= ((tmp - (rowst - 5) - 13) << 24); /* SDAM */ - psdmr |= ((tmp - 3 - 12) << 21); /* BSMA */ - - tmp = (31 - lsb - 10) - tmp; - /* Pin connected to SDA10 is (31 - lsb - 10). - rowst is multiplexed over (32 - (lsb + spd.nrow_addr)), - so (rowst + tmp) alternates with AP. - */ - if (pbi) /* Table 10-7 */ - psdmr |= ((10 - (rowst + tmp)) << 18); /* SDA10 */ - else - psdmr |= ((12 - (rowst + tmp)) << 18); /* SDA10 */ - - /* SDRAM device-specific parameters */ - tmp = ns2clk (70); /* Refresh recovery is not in SPD, so assume 70ns */ - switch (tmp) { /* RFRC */ - case 1: - case 2: - psdmr |= (1 << 15); - break; - case 3: - case 4: - case 5: - case 6: - case 7: - case 8: - psdmr |= ((tmp - 2) << 15); - break; - default: - psdmr |= (7 << 15); - } - psdmr |= (ns2clk (spd.trp) % 8 << 12); /* PRETOACT */ - psdmr |= (ns2clk (spd.trcd) % 8 << 9); /* ACTTORW */ - /* BL=0 because for 64-bit SDRAM burst length must be 4 */ - /* LDOTOPRE ??? */ - for (i = 0, tmp = spd.write_lat; (i < 4) && ((tmp & 1) == 0); i++) - tmp >>= 1; - switch (i) { /* WRC */ - case 0: - case 1: - psdmr |= (1 << 4); - break; - case 2: - case 3: - psdmr |= (i << 4); - break; - } - /* EAMUX=0 - no external address multiplexing */ - /* BUFCMD=0 - no external buffers */ - for (i = 1, tmp = spd.cas_lat; (i < 3) && ((tmp & 1) == 0); i++) - tmp >>= 1; - psdmr |= i; /* CL */ - - switch (spd.refresh & 0x7F) { - case 1: - tmp = 3900; - break; - case 2: - tmp = 7800; - break; - case 3: - tmp = 31300; - break; - case 4: - tmp = 62500; - break; - case 5: - tmp = 125000; - break; - default: - tmp = 15625; - } - psrt = tmp / (1000000000 / CONFIG_8260_CLKIN * - ((memctl->memc_mptpr >> 8) + 1)) - 1; -#ifdef SPD_DEBUG - printf ("\nDIMM type: %-18.18s\n", spd.mpart); - printf ("SPD size: %d\n", spd.info_size); - printf ("EEPROM size: %d\n", 1 << spd.chip_size); - printf ("Memory type: %d\n", spd.mem_type); - printf ("Row addr: %d\n", spd.nrow_addr); - printf ("Column addr: %d\n", spd.ncol_addr); - printf ("# of rows: %d\n", spd.nrows); - printf ("Row density: %d\n", spd.row_dens); - printf ("# of banks: %d\n", spd.nbanks); - printf ("Data width: %d\n", - 256 * spd.dataw_msb + spd.dataw_lsb); - printf ("Chip width: %d\n", spd.primw); - printf ("Refresh rate: %02X\n", spd.refresh); - printf ("CAS latencies: %02X\n", spd.cas_lat); - printf ("Write latencies: %02X\n", spd.write_lat); - printf ("tRP: %d\n", spd.trp); - printf ("tRCD: %d\n", spd.trcd); - - printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt); -#endif /* SPD_DEBUG */ - } -#else /* !CONFIG_SPD_EEPROM */ - or = CONFIG_SYS_OR2; - psdmr = CONFIG_SYS_PSDMR; - psrt = CONFIG_SYS_PSRT; -#endif /* CONFIG_SPD_EEPROM */ - memctl->memc_psrt = psrt; - memctl->memc_or2 = or; - memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x00000041; - ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE; - memctl->memc_psdmr = psdmr | 0x28000000; /* Precharge all banks */ - *ramaddr = c; - memctl->memc_psdmr = psdmr | 0x08000000; /* CBR refresh */ - for (i = 0; i < 8; i++) - *ramaddr = c; - - memctl->memc_psdmr = psdmr | 0x18000000; /* Mode Register write */ - *ramaddr = c; - memctl->memc_psdmr = psdmr | 0x40000000; /* Refresh enable */ - *ramaddr = c; -#endif /* CONFIG_SYS_RAMBOOT */ - - /* return total 60x bus SDRAM size */ - return (msize * 1024 * 1024); -} - -int checkboard (void) -{ -#if CONFIG_ADSTYPE == CONFIG_SYS_8260ADS - puts ("Board: Motorola MPC8260ADS\n"); -#elif CONFIG_ADSTYPE == CONFIG_SYS_8266ADS - puts ("Board: Motorola MPC8266ADS\n"); -#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS - puts ("Board: Motorola PQ2FADS-ZU\n"); -#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS - puts ("Board: Motorola MPC8272ADS\n"); -#else - puts ("Board: unknown\n"); -#endif - return 0; -} - -#ifdef CONFIG_PCI -struct pci_controller hose; - -extern void pci_mpc8250_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc8250_init(&hose); -} -#endif - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/boards.cfg b/boards.cfg index 5e60162..f29e1df 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1244,22 +1244,6 @@ Orphan powerpc mpc8260 - - ispan Orphan powerpc mpc8260 - - rattler Rattler - Yuli Barcohen yuli@arabellasw.com Orphan powerpc mpc8260 - - rattler Rattler8248 Rattler:MPC8248 Yuli Barcohen yuli@arabellasw.com Orphan powerpc mpc8260 - - zpc1900 ZPC1900 - Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads MPC8260ADS MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads MPC8260ADS_33MHz MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=33000000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads MPC8260ADS_33MHz_lowboot MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=33000000,SYS_TEXT_BASE=0xFF800000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads MPC8260ADS_40MHz MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=40000000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads MPC8260ADS_40MHz_lowboot MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=40000000,SYS_TEXT_BASE=0xFF800000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads MPC8260ADS_lowboot MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,SYS_TEXT_BASE=0xFF800000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads MPC8272ADS MPC8260ADS:ADSTYPE=CONFIG_SYS_8272ADS Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads MPC8272ADS_lowboot MPC8260ADS:ADSTYPE=CONFIG_SYS_8272ADS,SYS_TEXT_BASE=0xFF800000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads PQ2FADS MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads PQ2FADS-VR MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads PQ2FADS-VR_lowboot MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000,SYS_TEXT_BASE=0xFF800000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads PQ2FADS-ZU MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads PQ2FADS-ZU_66MHz MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads PQ2FADS-ZU_66MHz_lowboot MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000,SYS_TEXT_BASE=0xFF800000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads PQ2FADS-ZU_lowboot MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000 Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - freescale mpc8260ads PQ2FADS_lowboot MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000 Yuli Barcohen yuli@arabellasw.com Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK - Anton Vorontsov avorontsov@ru.mvista.com Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK_33 MPC8360ERDK:CLKIN_33MHZ Anton Vorontsov avorontsov@ru.mvista.com Orphan powerpc mpc83xx - matrix_vision mergerbox MERGERBOX - Andre Schwarz andre.schwarz@matrix-vision.de diff --git a/doc/README.scrapyard b/doc/README.scrapyard index fac4199..0a2d8fc 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +mpc8260ads powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com adder powerpc mpc8xx - - Yuli Barcohen yuli@arabellasw.com quad100hd powerpc ppc405ep - - Gary Jennejohn gljennjohn@googlemail.com lubbock arm pxa 36bf57b 2014-04-18 Kyle Harris kharris@nexus-tech.net diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h deleted file mode 100644 index 39f7564..0000000 --- a/include/configs/MPC8260ADS.h +++ /dev/null @@ -1,549 +0,0 @@ -/* - * (C) Copyright 2001 - * Stuart Hughes stuarth@lineo.com - * This file is based on similar values for other boards found in other - * U-Boot config files, and some that I found in the mpc8260ads manual. - * - * Note: my board is a PILOT rev. - * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address. - * - * (C) Copyright 2003-2004 Arabella Software Ltd. - * Yuli Barcohen yuli@arabellasw.com - * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2. - * Ported to PQ2FADS-ZU and PQ2FADS-VR boards. - * Ported to MPC8272ADS board. - * - * Copyright (c) 2005 MontaVista Software, Inc. - * Vitaly Bordug vbordug@ru.mvista.com - * Added support for PCI bridge on MPC8272ADS - * - * Copyright (C) Freescale Semiconductor, Inc. 2006-2009. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8260ADS 1 /* Motorola PQ2 ADS family board */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */ -#endif - -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -/* - * Figure out if we are booting low via flash HRCW or high via the BCSR. - */ -#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000) /* Boot low (flash HRCW) */ -# define CONFIG_SYS_LOWBOOT 1 -#endif - -/* ADS flavours */ -#define CONFIG_SYS_8260ADS 1 /* MPC8260ADS */ -#define CONFIG_SYS_8266ADS 2 /* MPC8266ADS */ -#define CONFIG_SYS_PQ2FADS 3 /* PQ2FADS-ZU or PQ2FADS-VR */ -#define CONFIG_SYS_8272ADS 4 /* MPC8272ADS */ - -#ifndef CONFIG_ADSTYPE -#define CONFIG_ADSTYPE CONFIG_SYS_8260ADS -#endif /* CONFIG_ADSTYPE */ - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS -#define CONFIG_MPC8272 1 -#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS -/* - * Actually MPC8275, but the code is littered with ifdefs that - * apply to both, or which use this ifdef to assume board-specific - * details. :-( - */ -#define CONFIG_MPC8272 1 -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ - -/* allow serial and ethaddr to be overwritten */ -#define CONFIG_ENV_OVERWRITE - -/* - * select serial console configuration - * - * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - * - * if CONFIG_CONS_NONE is defined, then the serial console routines must - * defined elsewhere (for example, on the cogent platform, there are serial - * ports on the motherboard which are used for the serial console - see - * cogent/cma101/serial.[ch]). - */ -#undef CONFIG_CONS_ON_SMC /* define if console on SMC */ -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ - -#ifdef CONFIG_ETHER_ON_FCC - -#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */ - -#if CONFIG_ETHER_INDEX == 1 - -# define CONFIG_SYS_PHY_ADDR 0 -# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10) -# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK) - -#elif CONFIG_ETHER_INDEX == 2 - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS /* RxCLK is CLK15, TxCLK is CLK16 */ -# define CONFIG_SYS_PHY_ADDR 3 -# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK16) -#else /* RxCLK is CLK13, TxCLK is CLK14 */ -# define CONFIG_SYS_PHY_ADDR 0 -# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ - -# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) - -#endif /* CONFIG_ETHER_INDEX */ - -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 /* BDs and buffers on 60x bus */ -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) /* Full duplex */ - -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ -/* - * GPIO pins used for bit-banged MII communications - */ -#define MDIO_PORT 2 /* Port C */ -#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -#define MDC_DECLARE MDIO_DECLARE - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS -#define CONFIG_SYS_MDIO_PIN 0x00002000 /* PC18 */ -#define CONFIG_SYS_MDC_PIN 0x00001000 /* PC19 */ -#else -#define CONFIG_SYS_MDIO_PIN 0x00400000 /* PC9 */ -#define CONFIG_SYS_MDC_PIN 0x00200000 /* PC10 */ -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ - -#define MDIO_ACTIVE (iop->pdir |= CONFIG_SYS_MDIO_PIN) -#define MDIO_TRISTATE (iop->pdir &= ~CONFIG_SYS_MDIO_PIN) -#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0) - -#define MDIO(bit) if(bit) iop->pdat |= CONFIG_SYS_MDIO_PIN; \ - else iop->pdat &= ~CONFIG_SYS_MDIO_PIN - -#define MDC(bit) if(bit) iop->pdat |= CONFIG_SYS_MDC_PIN; \ - else iop->pdat &= ~CONFIG_SYS_MDC_PIN - -#define MIIDELAY udelay(1) - -#endif /* CONFIG_ETHER_ON_FCC */ - -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS -#undef CONFIG_SPD_EEPROM /* On new boards, SDRAM is soldered */ -#else -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR) -#define CONFIG_SPD_ADDR 0x50 -#endif -#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */ - -/*PCI*/ -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS -#define CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCI_PNP -#define CONFIG_PCI_BOOTDELAY 0 -#define CONFIG_PCI_SCAN_SHOW -#endif - -#ifndef CONFIG_SDRAM_PBI -#define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */ -#endif - -#ifndef CONFIG_8260_CLKIN -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS -#define CONFIG_8260_CLKIN 100000000 /* in Hz */ -#else -#define CONFIG_8260_CLKIN 66000000 /* in Hz */ -#endif -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#if defined(CONFIG_OF_LIBFDT) -#define OF_TBCLK (bd->bi_busfreq / 4) -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM - -#undef CONFIG_CMD_XIMG - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS - #undef CONFIG_CMD_SDRAM - #undef CONFIG_CMD_I2C - -#elif CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS - #undef CONFIG_CMD_SDRAM - #undef CONFIG_CMD_I2C - -#else - #undef CONFIG_CMD_PCI - -#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */ - - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm fff80000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock2" - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ -#endif - -#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_FLASH_BASE 0xff800000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max num of sects on one chip */ -#define CONFIG_SYS_FLASH_SIZE 8 -#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -/* - * JFFS2 partitions - * - * Note: fake mtd_id used, no linux mtd map file - */ -#define MTDIDS_DEFAULT "nor0=mpc8260ads-0" -#define MTDPARTS_DEFAULT "mtdparts=mpc8260ads-0:-@1m(jffs2)" -#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS - -/* this is stuff came out of the Motorola docs */ -#ifndef CONFIG_SYS_LOWBOOT -#define CONFIG_SYS_DEFAULT_IMMR 0x0F010000 -#endif - -#define CONFIG_SYS_IMMR 0xF0000000 -#define CONFIG_SYS_BCSR 0xF4500000 -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS -#define CONFIG_SYS_PCI_INT 0xF8200000 -#endif -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_LSDRAM_BASE 0xFD000000 - -#define RS232EN_1 0x02000002 -#define RS232EN_2 0x01000001 -#define FETHIEN1 0x08000008 -#define FETH1_RST 0x04000004 -#define FETHIEN2 0x10000000 -#define FETH2_RST 0x08000000 -#define BCSR_PCI_MODE 0x01000000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#ifdef CONFIG_SYS_LOWBOOT -/* PQ2FADS flash HRCW = 0x0EB4B645 */ -#define CONFIG_SYS_HRCW_MASTER ( ( HRCW_BPS11 | HRCW_CIP ) |\ - ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB100 ) |\ - ( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 ) |\ - ( HRCW_CS10PC01 | HRCW_MODCK_H0101 ) \ - ) -#else -/* PQ2FADS BCSR HRCW = 0x0CB23645 */ -#define CONFIG_SYS_HRCW_MASTER ( ( HRCW_BPS11 | HRCW_CIP ) |\ - ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 ) |\ - ( HRCW_BMS | HRCW_APPC10 ) |\ - ( HRCW_MODCK_H0101 ) \ - ) -#endif -/* no slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#ifdef CONFIG_BZIP2 -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ -#else -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ -#endif /* CONFIG_BZIP2 */ - -#ifndef CONFIG_SYS_RAMBOOT -# define CONFIG_ENV_IS_IN_FLASH 1 -# define CONFIG_ENV_SECT_SIZE 0x40000 -# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE) -#else -# define CONFIG_ENV_IS_IN_NVRAM 1 -# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) -# define CONFIG_ENV_SIZE 0x200 -#endif /* CONFIG_SYS_RAMBOOT */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE ) - -#define CONFIG_SYS_HID2 0 - -#define CONFIG_SYS_SYPCR 0xFFFFFFC3 -#define CONFIG_SYS_BCR 0x100C0000 -#define CONFIG_SYS_SIUMCR 0x0A200000 -#define CONFIG_SYS_SCCR SCCR_DFBRG01 -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00001801) -#define CONFIG_SYS_OR0_PRELIM 0xFF800876 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR | 0x00001801) -#define CONFIG_SYS_OR1_PRELIM 0xFFFF8010 - -/*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/ - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PCI_INT | 0x1801) /* PCI interrupt controller */ -#define CONFIG_SYS_OR3_PRELIM 0xFFFF8010 -#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS -#define CONFIG_SYS_BR8_PRELIM (CONFIG_SYS_PCI_INT | 0x1801) /* PCI interrupt controller */ -#define CONFIG_SYS_OR8_PRELIM 0xFFFF8010 -#endif - -#define CONFIG_SYS_RMR RMR_CSRE -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) -#define CONFIG_SYS_RCCR 0 - -#if (CONFIG_ADSTYPE == CONFIG_SYS_8266ADS) || (CONFIG_ADSTYPE == CONFIG_SYS_8272ADS) -#undef CONFIG_SYS_LSDRAM_BASE /* No local bus SDRAM on these boards */ -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8266ADS */ - -#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS -#define CONFIG_SYS_OR2 0xFE002EC0 -#define CONFIG_SYS_PSDMR 0x824B36A3 -#define CONFIG_SYS_PSRT 0x13 -#define CONFIG_SYS_LSDMR 0x828737A3 -#define CONFIG_SYS_LSRT 0x13 -#define CONFIG_SYS_MPTPR 0x2800 -#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS -#define CONFIG_SYS_OR2 0xFC002CC0 -#define CONFIG_SYS_PSDMR 0x834E24A3 -#define CONFIG_SYS_PSRT 0x13 -#define CONFIG_SYS_MPTPR 0x2800 -#else -#define CONFIG_SYS_OR2 0xFF000CA0 -#define CONFIG_SYS_PSDMR 0x016EB452 -#define CONFIG_SYS_PSRT 0x21 -#define CONFIG_SYS_LSDMR 0x0086A522 -#define CONFIG_SYS_LSRT 0x21 -#define CONFIG_SYS_MPTPR 0x1900 -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ - -#define CONFIG_SYS_RESET_ADDRESS 0x04400000 - -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS - -/* PCI Memory map (if different from default map */ -#define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */ -#define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ -#define CONFIG_SYS_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ - PICMR_PREFETCH_EN) - -/* - * These are the windows that allow the CPU to access PCI address space. - * All three PCI master windows, which allow the CPU to access PCI - * prefetch, non prefetch, and IO space (see below), must all fit within - * these windows. - */ - -/* - * Master window that allows the CPU to access PCI Memory (prefetch). - * This window will be setup with the second set of Outbound ATU registers - * in the bridge. - */ - -#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define CONFIG_SYS_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define CONFIG_SYS_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL -#define CONFIG_SYS_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ -#define CONFIG_SYS_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN) - -/* - * Master window that allows the CPU to access PCI Memory (non-prefetch). - * This window will be setup with the second set of Outbound ATU registers - * in the bridge. - */ - -#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ -#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ -#define CONFIG_SYS_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL -#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ -#define CONFIG_SYS_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) - -/* - * Master window that allows the CPU to access PCI IO space. - * This window will be setup with the first set of Outbound ATU registers - * in the bridge. - */ - -#define CONFIG_SYS_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */ -#define CONFIG_SYS_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ -#define CONFIG_SYS_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL -#define CONFIG_SYS_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */ -#define CONFIG_SYS_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO) - - -/* PCIBR0 - for PCI IO*/ -#define CONFIG_SYS_PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL /* Local base */ -#define CONFIG_SYS_PCIMSK0_MASK ~(CONFIG_SYS_PCI_MSTR_IO_SIZE - 1U) /* Size of window */ -/* PCIBR1 - prefetch and non-prefetch regions joined together */ -#define CONFIG_SYS_PCI_MSTR1_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL -#define CONFIG_SYS_PCIMSK1_MASK ~(CONFIG_SYS_PCI_MSTR_MEM_SIZE + CONFIG_SYS_PCI_MSTR_MEMIO_SIZE - 1U) - -#endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/ - -#define CONFIG_HAS_ETH0 - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS -#define CONFIG_HAS_ETH1 -#endif - -#define CONFIG_NETDEV eth0 -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=" __stringify(CONFIG_NETDEV) "\0" \ - "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize\0" \ - "fdtaddr=400000\0" \ - "console=ttyCPM0\0" \ - "setbootargs=setenv bootargs " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ - "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv rootdev /dev/nfs;" \ - "run setipargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv rootdev /dev/ram;" \ - "run setbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#endif /* __CONFIG_H */

This board has been orphan for a while. (Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up the maintainership on it.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Wolfgang Denx wd@denx.de ---

board/rattler/Makefile | 8 -- board/rattler/rattler.c | 215 ----------------------------------- boards.cfg | 2 - doc/README.scrapyard | 1 + include/configs/Rattler.h | 279 ---------------------------------------------- 5 files changed, 1 insertion(+), 504 deletions(-) delete mode 100644 board/rattler/Makefile delete mode 100644 board/rattler/rattler.c delete mode 100644 include/configs/Rattler.h

diff --git a/board/rattler/Makefile b/board/rattler/Makefile deleted file mode 100644 index 9de89c8..0000000 --- a/board/rattler/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := rattler.o diff --git a/board/rattler/rattler.c b/board/rattler/rattler.c deleted file mode 100644 index f7fb349..0000000 --- a/board/rattler/rattler.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * Copyright (C) 2004 Arabella Software Ltd. - * Yuli Barcohen yuli@arabellasw.com - * - * Support for Analogue&Micro Rattler boards family. - * Tested on Rattler8248. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8260.h> -#include <ioports.h> - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1) -#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2) - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ - /* PA30 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ - /* PA29 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ - /* PA28 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ - /* PA27 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ - /* PA26 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ - /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */ - /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */ - /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */ - /* PA22 */ { 1, 0, 0, 1, 0, 1 }, /* Eth PHYs reset */ - /* PA21 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ - /* PA20 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ - /* PA19 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ - /* PA18 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ - /* PA17 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ - /* PA16 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ - /* PA15 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ - /* PA14 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ - /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */ - /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */ - /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */ - /* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */ - /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TxD */ - /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RxD */ - /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */ - /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ - /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ - /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */ - }, - - /* Port B */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { CONFIG_SYS_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */ - /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ - /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ - /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ - /* PC22 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 TxClk (CLK10) */ - /* PC21 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 RxClk (CLK11) */ - /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */ - /* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */ - /* PC18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 TxClk (CLK14) */ - /* PC17 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 RxClk (CLK15) */ - /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ - /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ - /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ - /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ - /* PC9 */ { 1, 0, 0, 1, 0, 1 }, /* MDIO */ - /* PC8 */ { 1, 0, 0, 1, 0, 1 }, /* MDC */ - /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ - /* PC5 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TxD */ - /* PC4 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RxD */ - /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ - /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ - /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RxD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TxD */ - /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */ - /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */ - /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */ - /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */ - /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */ - /* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */ - /* PD15 */ { 0, 0, 0, 0, 0, 0 }, /* PD15 */ - /* PD14 */ { 0, 0, 0, 0, 0, 0 }, /* PD14 */ - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */ - /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */ - /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */ - } -}; - -phys_size_t initdram(int board_type) -{ - long int msize = CONFIG_SYS_SDRAM_SIZE; - -#ifndef CONFIG_SYS_RAMBOOT - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - vu_char *ramaddr = (vu_char *)CONFIG_SYS_SDRAM_BASE; - uchar c = 0xFF; - uint psdmr = CONFIG_SYS_PSDMR; - int i; - - immap->im_siu_conf.sc_ppc_acr = 0x02; - immap->im_siu_conf.sc_ppc_alrh = 0x30126745; - immap->im_siu_conf.sc_tescr1 = 0x00004000; - - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - /* Initialise 60x bus SDRAM */ - memctl->memc_psrt = CONFIG_SYS_PSRT; - memctl->memc_or1 = CONFIG_SYS_SDRAM_OR; - memctl->memc_br1 = CONFIG_SYS_SDRAM_BR; - memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */ - *ramaddr = c; - memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */ - for (i = 0; i < 8; i++) - *ramaddr = c; - memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; /* Mode Register write */ - *ramaddr = c; - memctl->memc_psdmr = psdmr | PSDMR_RFEN; /* Refresh enable */ - *ramaddr = c; -#endif /* !CONFIG_SYS_RAMBOOT */ - - /* Return total 60x bus SDRAM size */ - return msize * 1024 * 1024; -} - -int checkboard(void) -{ - vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR; - - printf("Board: Rattler Rev. %c\n", bcsr[0x20] + 0x40); - return 0; -} diff --git a/boards.cfg b/boards.cfg index a3f5b6e..f2045fa 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1241,8 +1241,6 @@ Orphan powerpc mpc824x - etin - Orphan powerpc mpc8260 - - ep8248 ep8248 - Yuli Barcohen yuli@arabellasw.com Orphan powerpc mpc8260 - - ispan ISPAN - Yuli Barcohen yuli@arabellasw.com Orphan powerpc mpc8260 - - ispan ISPAN_REVB ISPAN:SYS_REV_B Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - - rattler Rattler - Yuli Barcohen yuli@arabellasw.com -Orphan powerpc mpc8260 - - rattler Rattler8248 Rattler:MPC8248 Yuli Barcohen yuli@arabellasw.com Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK - Anton Vorontsov avorontsov@ru.mvista.com Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK_33 MPC8360ERDK:CLKIN_33MHZ Anton Vorontsov avorontsov@ru.mvista.com Orphan powerpc mpc83xx - matrix_vision mergerbox MERGERBOX - Andre Schwarz andre.schwarz@matrix-vision.de diff --git a/doc/README.scrapyard b/doc/README.scrapyard index a042eea..306b4fe 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +rattler powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com zpc1900 powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com mpc8260ads powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com adder powerpc mpc8xx - - Yuli Barcohen yuli@arabellasw.com diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h deleted file mode 100644 index a1e2ae9..0000000 --- a/include/configs/Rattler.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright (C) 2004 Arabella Software Ltd. - * Yuli Barcohen yuli@arabellasw.com - * - * U-Boot configuration for Analogue&Micro Rattler boards. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_MPC8248 -#define CPU_ID_STR "MPC8248" -#else -#define CPU_ID_STR "MPC8250" -#endif /* CONFIG_MPC8248 */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -#define CONFIG_RATTLER /* Analogue&Micro Rattler board */ - -/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ -#define CONFIG_ENV_OVERWRITE - -/* - * Select serial console configuration - * - * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - */ -#define CONFIG_CONS_ON_SMC /* Console is on SMC */ -#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ -#undef CONFIG_CONS_NONE /* It's not on external UART */ -#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */ - -/* - * Select ethernet configuration - * - * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, - * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for - * SCC, 1-3 for FCC) - * - * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CONFIG_CMD_NET - * must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ -#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ -#undef CONFIG_ETHER_NONE /* No external Ethernet */ - -#ifdef CONFIG_ETHER_ON_FCC - -#define CONFIG_ETHER_INDEX 1 /* FCC1 is used for Ethernet */ - -#if (CONFIG_ETHER_INDEX == 1) - -/* - Rx clock is CLK11 - * - Tx clock is CLK10 - * - BDs/buffers on 60x bus - * - Full duplex - */ -#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) - -#elif (CONFIG_ETHER_INDEX == 2) - -/* - Rx clock is CLK15 - * - Tx clock is CLK14 - * - BDs/buffers on 60x bus - * - Full duplex - */ -#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK14) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) - -#endif /* CONFIG_ETHER_INDEX */ - -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ -/* - * GPIO pins used for bit-banged MII communications - */ -#define MDIO_PORT 2 /* Port C */ -#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -#define MDC_DECLARE MDIO_DECLARE - -#define MDIO_ACTIVE (iop->pdir |= 0x00400000) -#define MDIO_TRISTATE (iop->pdir &= ~0x00400000) -#define MDIO_READ ((iop->pdat & 0x00400000) != 0) - -#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ - else iop->pdat &= ~0x00400000 - -#define MDC(bit) if(bit) iop->pdat |= 0x00800000; \ - else iop->pdat &= ~0x00800000 - -#define MIIDELAY udelay(1) - -#endif /* CONFIG_ETHER_ON_FCC */ - -#ifndef CONFIG_8260_CLKIN -#define CONFIG_8260_CLKIN 100000000 /* in Hz */ -#endif - -#define CONFIG_BAUDRATE 38400 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm FE040000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw mtdparts=phys:1M(ROM)ro,-(root)" - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ -#endif - -#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -#if defined(CONFIG_CMD_JFFS2) -#define CONFIG_SYS_JFFS2_NUM_BANKS CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00100000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=rattler-0" -#define MTDPARTS_DEFAULT "mtdparts=rattler-0:-@1m(jffs2)" -*/ -#endif /* CONFIG_CMD_JFFS2 */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ - -#define CONFIG_ENV_IS_IN_FLASH - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -#define CONFIG_SYS_DEFAULT_IMMR 0xFF010000 - -#define CONFIG_SYS_IMMR 0xF0000000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE 32 -#define CONFIG_SYS_SDRAM_BR (CONFIG_SYS_SDRAM_BASE | 0x00000041) -#define CONFIG_SYS_SDRAM_OR 0xFE002EC0 - -#define CONFIG_SYS_BCSR 0xFC000000 - -/* Hard reset configuration word */ -#define CONFIG_SYS_HRCW_MASTER 0x0A06875A /* Not used - provided by FPGA */ -/* No slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) - -#define CONFIG_SYS_HID2 0 - -#define CONFIG_SYS_SIUMCR 0x0E04C000 -#define CONFIG_SYS_SYPCR 0xFFFFFFC3 -#define CONFIG_SYS_BCR 0x00000000 -#define CONFIG_SYS_SCCR SCCR_DFBRG01 - -#define CONFIG_SYS_RMR RMR_CSRE -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) -#define CONFIG_SYS_RCCR 0 - -#define CONFIG_SYS_PSDMR 0x8249A452 -#define CONFIG_SYS_PSRT 0x1F -#define CONFIG_SYS_MPTPR 0x2000 - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00001001) -#define CONFIG_SYS_OR0_PRELIM 0xFF001ED6 -#define CONFIG_SYS_BR7_PRELIM (CONFIG_SYS_BCSR | 0x00000801) -#define CONFIG_SYS_OR7_PRELIM 0xFFFF87F6 - -#define CONFIG_SYS_RESET_ADDRESS 0xC0000000 - -#endif /* __CONFIG_H */

This board has been orphan for a while. (Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up the maintainership on it.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Wolfgang Denx wd@denx.de ---

board/ep8248/Makefile | 8 -- board/ep8248/ep8248.c | 254 ----------------------------------------------- boards.cfg | 1 - doc/README.scrapyard | 1 + include/common.h | 2 - include/configs/ep8248.h | 253 ---------------------------------------------- include/mpc8260.h | 4 - 7 files changed, 1 insertion(+), 522 deletions(-) delete mode 100644 board/ep8248/Makefile delete mode 100644 board/ep8248/ep8248.c delete mode 100644 include/configs/ep8248.h

diff --git a/board/ep8248/Makefile b/board/ep8248/Makefile deleted file mode 100644 index bfaf1c8..0000000 --- a/board/ep8248/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := ep8248.o diff --git a/board/ep8248/ep8248.c b/board/ep8248/ep8248.c deleted file mode 100644 index 736c180..0000000 --- a/board/ep8248/ep8248.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * Copyright (C) 2004 Arabella Software Ltd. - * Yuli Barcohen yuli@arabellasw.com - * - * Support for Embedded Planet EP8248 boards. - * Tested on EP8248E. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8260.h> -#include <ioports.h> - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -#define CONFIG_SYS_FCC1 (CONFIG_ETHER_ON_FCC1 == 1) -#define CONFIG_SYS_FCC2 (CONFIG_ETHER_ON_FCC2 == 1) - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ - /* PA30 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ - /* PA29 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ - /* PA28 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ - /* PA27 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ - /* PA26 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ - /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */ - /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */ - /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */ - /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */ - /* PA21 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ - /* PA20 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ - /* PA19 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ - /* PA18 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ - /* PA17 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ - /* PA16 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ - /* PA15 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ - /* PA14 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ - /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */ - /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */ - /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */ - /* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */ - /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TxD */ - /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RxD */ - /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */ - /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ - /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ - /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */ - }, - - /* Port B */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { CONFIG_SYS_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */ - /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ - /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ - /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ - /* PC22 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 RxClk (CLK10) */ - /* PC21 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 TxClk (CLK11) */ - /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */ - /* PC19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 RxClk (CLK13) */ - /* PC18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 TxClk (CLK14) */ - /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ - /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ - /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ - /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ - /* PC9 */ { 1, 0, 0, 1, 0, 1 }, /* MDIO */ - /* PC8 */ { 1, 0, 0, 1, 0, 1 }, /* MDC */ - /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ - /* PC5 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TxD */ - /* PC4 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RxD */ - /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ - /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ - /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RxD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TxD */ - /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */ - /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */ - /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */ - /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */ - /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */ - /* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */ - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */ - /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */ - /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */ - } -}; - -int board_early_init_f (void) -{ - vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR; - - bcsr[4] |= 0x30; /* Turn the LEDs off */ - -#if defined(CONFIG_CONS_ON_SMC) || defined(CONFIG_KGDB_ON_SMC) - bcsr[6] |= 0x10; -#endif -#if defined(CONFIG_CONS_ON_SCC) || defined(CONFIG_KGDB_ON_SCC) - bcsr[7] |= 0x10; -#endif - -#if CONFIG_SYS_FCC1 - bcsr[8] |= 0xC0; -#endif /* CONFIG_SYS_FCC1 */ -#if CONFIG_SYS_FCC2 - bcsr[8] |= 0x30; -#endif /* CONFIG_SYS_FCC2 */ - - return 0; -} - -phys_size_t initdram(int board_type) -{ - vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR; - long int msize = 16L << (bcsr[2] & 3); - -#ifndef CONFIG_SYS_RAMBOOT - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - vu_char *ramaddr = (vu_char *)CONFIG_SYS_SDRAM_BASE; - uchar c = 0xFF; - uint psdmr = CONFIG_SYS_PSDMR; - int i; - - immap->im_siu_conf.sc_ppc_acr = 0x02; - immap->im_siu_conf.sc_ppc_alrh = 0x30126745; - immap->im_siu_conf.sc_tescr1 = 0x00004000; - - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - /* Initialise 60x bus SDRAM */ - memctl->memc_psrt = CONFIG_SYS_PSRT; - memctl->memc_or1 = CONFIG_SYS_SDRAM_OR; - memctl->memc_br1 = CONFIG_SYS_SDRAM_BR; - memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */ - *ramaddr = c; - memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */ - for (i = 0; i < 8; i++) - *ramaddr = c; - memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; /* Mode Register write */ - *ramaddr = c; - memctl->memc_psdmr = psdmr | PSDMR_RFEN; /* Refresh enable */ - *ramaddr = c; -#endif /* !CONFIG_SYS_RAMBOOT */ - - /* Return total 60x bus SDRAM size */ - return msize * 1024 * 1024; -} - -int checkboard(void) -{ - vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR; - - puts("Board: "); - switch (bcsr[0]) { - case 0x0C: - printf("EP8248E 1.0 CPLD revision %d\n", bcsr[1]); - break; - default: - printf("unknown: ID=%02X\n", bcsr[0]); - } - - return 0; -} - -#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) -void ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup( blob, bd); -} -#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/boards.cfg b/boards.cfg index 693494a..d6836ff 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1238,7 +1238,6 @@ Orphan powerpc mpc5xxx - matrix_vision mvsmr Orphan powerpc mpc824x - - hidden_dragon HIDDEN_DRAGON - Yusdi Santoso yusdi_santoso@adaptec.com Orphan powerpc mpc824x - etin - debris - Sangmoon Kim dogoil@etinsys.com Orphan powerpc mpc824x - etin - kvme080 - Sangmoon Kim dogoil@etinsys.com -Orphan powerpc mpc8260 - - ep8248 ep8248 - Yuli Barcohen yuli@arabellasw.com Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK - Anton Vorontsov avorontsov@ru.mvista.com Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK_33 MPC8360ERDK:CLKIN_33MHZ Anton Vorontsov avorontsov@ru.mvista.com Orphan powerpc mpc83xx - matrix_vision mergerbox MERGERBOX - Andre Schwarz andre.schwarz@matrix-vision.de diff --git a/doc/README.scrapyard b/doc/README.scrapyard index fc5d271..2b9eb69 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +ep8248 powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com ispan powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com rattler powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com zpc1900 powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com diff --git a/include/common.h b/include/common.h index 232136c..6829171 100644 --- a/include/common.h +++ b/include/common.h @@ -54,8 +54,6 @@ typedef volatile unsigned char vu_char; #include <asm/immap_512x.h> #elif defined(CONFIG_MPC8260) #if defined(CONFIG_MPC8247) \ - || defined(CONFIG_MPC8248) \ - || defined(CONFIG_MPC8271) \ || defined(CONFIG_MPC8272) #define CONFIG_MPC8272_FAMILY 1 #endif diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h deleted file mode 100644 index f1af96d..0000000 --- a/include/configs/ep8248.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - * Copyright (C) 2004 Arabella Software Ltd. - * Yuli Barcohen yuli@arabellasw.com - * - * U-Boot configuration for Embedded Planet EP8248 boards. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MPC8248 -#define CPU_ID_STR "MPC8248" - -#define CONFIG_EP8248 /* Embedded Planet EP8248 board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ -#define CONFIG_ENV_OVERWRITE - -/* - * Select serial console configuration - * - * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - */ -#define CONFIG_CONS_ON_SMC /* Console is on SMC */ -#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ -#undef CONFIG_CONS_NONE /* It's not on external UART */ -#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */ - -#define CONFIG_SYS_BCSR 0xFA000000 - -/* Pass open firmware flat device tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc/cpm/serial <at> 11a80" - -/* Select ethernet configuration */ -#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ -#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ -#undef CONFIG_ETHER_NONE /* No external Ethernet */ - -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) - -#define CONFIG_HAS_ETH0 -#define CONFIG_ETHER_ON_FCC1 1 -/* - Rx clock is CLK10 - * - Tx clock is CLK11 - * - BDs/buffers on 60x bus - * - Full duplex - */ -#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11) - -#define CONFIG_HAS_ETH1 -#define CONFIG_ETHER_ON_FCC2 1 -/* - Rx clock is CLK13 - * - Tx clock is CLK14 - * - BDs/buffers on 60x bus - * - Full duplex - */ -#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) - -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ -/* - * GPIO pins used for bit-banged MII communications - */ -#define MDIO_PORT 0 /* Not used - implemented in BCSR */ - -#define MDIO_ACTIVE (*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFB) -#define MDIO_TRISTATE (*(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x04) -#define MDIO_READ (*(vu_char *)(CONFIG_SYS_BCSR + 8) & 1) - -#define MDIO(bit) if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x01; \ - else *(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFE - -#define MDC(bit) if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x02; \ - else *(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFD - -#define MIIDELAY udelay(1) - -#ifndef CONFIG_8260_CLKIN -#define CONFIG_8260_CLKIN 66000000 /* in Hz */ -#endif - -#define CONFIG_BAUDRATE 38400 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm FF860000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro" - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */ -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ -#endif - -#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_FLASH_BASE 0xFF800000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -#if defined(CONFIG_CMD_JFFS2) -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_NUM_BANKS CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0 -#define CONFIG_SYS_JFFS2_LAST_SECTOR 62 -#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS -#define CONFIG_SYS_JFFS_CUSTOM_PART -#endif - -#if defined(CONFIG_CMD_I2C) -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ -#endif - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256KB for Monitor */ - -#define CONFIG_ENV_IS_IN_FLASH - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -#define CONFIG_SYS_DEFAULT_IMMR 0x00010000 - -#define CONFIG_SYS_IMMR 0xF0000000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* Hard reset configuration word */ -#define CONFIG_SYS_HRCW_MASTER 0x0C40025A /* Not used - provided by FPGA */ -/* No slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) - -#define CONFIG_SYS_HID2 0 - -#define CONFIG_SYS_SIUMCR 0x01240200 -#define CONFIG_SYS_SYPCR 0xFFFF0683 -#define CONFIG_SYS_BCR 0x00000000 -#define CONFIG_SYS_SCCR SCCR_DFBRG01 - -#define CONFIG_SYS_RMR RMR_CSRE -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) -#define CONFIG_SYS_RCCR 0 - -#define CONFIG_SYS_MPTPR 0x1300 -#define CONFIG_SYS_PSDMR 0x82672522 -#define CONFIG_SYS_PSRT 0x4B - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BR (CONFIG_SYS_SDRAM_BASE | 0x00001841) -#define CONFIG_SYS_SDRAM_OR 0xFF0030C0 - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00001801) -#define CONFIG_SYS_OR0_PRELIM 0xFF8008C2 -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_BCSR | 0x00000801) -#define CONFIG_SYS_OR2_PRELIM 0xFFF00864 - -#define CONFIG_SYS_RESET_ADDRESS 0xC0000000 - -#endif /* __CONFIG_H */ diff --git a/include/mpc8260.h b/include/mpc8260.h index a8ae278..9980c74 100644 --- a/include/mpc8260.h +++ b/include/mpc8260.h @@ -21,10 +21,6 @@ #if defined(CONFIG_MPC8272_FAMILY) #ifdef CONFIG_MPC8247 #define CPU_ID_STR "MPC8247" -#elif defined CONFIG_MPC8248 -#define CPU_ID_STR "MPC8248" -#elif defined CONFIG_MPC8271 -#define CPU_ID_STR "MPC8271" #else #define CPU_ID_STR "MPC8272" #endif

This board has been orphan for a while. (Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up the maintainership on it.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Wolfgang Denx wd@denx.de ---

board/etin/debris/Makefile | 8 - board/etin/debris/debris.c | 174 ----------- board/etin/debris/flash.c | 705 -------------------------------------------- board/etin/debris/phantom.c | 301 ------------------- boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/debris.h | 443 ---------------------------- 7 files changed, 1 insertion(+), 1632 deletions(-) delete mode 100644 board/etin/debris/Makefile delete mode 100644 board/etin/debris/debris.c delete mode 100644 board/etin/debris/flash.c delete mode 100644 board/etin/debris/phantom.c delete mode 100644 include/configs/debris.h

diff --git a/board/etin/debris/Makefile b/board/etin/debris/Makefile deleted file mode 100644 index 2e74823..0000000 --- a/board/etin/debris/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = debris.o flash.o phantom.o diff --git a/board/etin/debris/debris.c b/board/etin/debris/debris.c deleted file mode 100644 index 0308fef..0000000 --- a/board/etin/debris/debris.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * (C) Copyright 2000 - * Sangmoon Kim, Etin Systems. dogoil@etinsys.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc824x.h> -#include <net.h> -#include <pci.h> -#include <i2c.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -int checkboard (void) -{ - /*TODO: Check processor type */ - - puts ( "Board: Debris " -#ifdef CONFIG_MPC8240 - "8240" -#endif -#ifdef CONFIG_MPC8245 - "8245" -#endif - " ##Test not implemented yet##\n"); - return 0; -} - -#if 0 /* NOT USED */ -int checkflash (void) -{ - /* TODO: XXX XXX XXX */ - printf ("## Test not implemented yet ##\n"); - - return (0); -} -#endif - -phys_size_t initdram (int board_type) -{ - int m, row, col, bank, i; - unsigned long start, end; - uint32_t mccr1; - uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0; - uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0; - uint8_t mber = 0; - - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - if (i2c_reg_read (0x50, 2) != 0x04) return 0; /* Memory type */ - m = i2c_reg_read (0x50, 5); /* # of physical banks */ - row = i2c_reg_read (0x50, 3); /* # of rows */ - col = i2c_reg_read (0x50, 4); /* # of columns */ - bank = i2c_reg_read (0x50, 17); /* # of logical banks */ - - CONFIG_READ_WORD(MCCR1, mccr1); - mccr1 &= 0xffff0000; - - start = CONFIG_SYS_SDRAM_BASE; - end = start + (1 << (col + row + 3) ) * bank - 1; - - for (i = 0; i < m; i++) { - mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2; - if (i < 4) { - msar1 |= ((start >> 20) & 0xff) << i * 8; - emsar1 |= ((start >> 28) & 0xff) << i * 8; - mear1 |= ((end >> 20) & 0xff) << i * 8; - emear1 |= ((end >> 28) & 0xff) << i * 8; - } else { - msar2 |= ((start >> 20) & 0xff) << (i-4) * 8; - emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8; - mear2 |= ((end >> 20) & 0xff) << (i-4) * 8; - emear2 |= ((end >> 28) & 0xff) << (i-4) * 8; - } - mber |= 1 << i; - start += (1 << (col + row + 3) ) * bank; - end += (1 << (col + row + 3) ) * bank; - } - for (; i < 8; i++) { - if (i < 4) { - msar1 |= 0xff << i * 8; - emsar1 |= 0x30 << i * 8; - mear1 |= 0xff << i * 8; - emear1 |= 0x30 << i * 8; - } else { - msar2 |= 0xff << (i-4) * 8; - emsar2 |= 0x30 << (i-4) * 8; - mear2 |= 0xff << (i-4) * 8; - emear2 |= 0x30 << (i-4) * 8; - } - } - - CONFIG_WRITE_WORD(MCCR1, mccr1); - CONFIG_WRITE_WORD(MSAR1, msar1); - CONFIG_WRITE_WORD(EMSAR1, emsar1); - CONFIG_WRITE_WORD(MEAR1, mear1); - CONFIG_WRITE_WORD(EMEAR1, emear1); - CONFIG_WRITE_WORD(MSAR2, msar2); - CONFIG_WRITE_WORD(EMSAR2, emsar2); - CONFIG_WRITE_WORD(MEAR2, mear2); - CONFIG_WRITE_WORD(EMEAR2, emear2); - CONFIG_WRITE_BYTE(MBER, mber); - - return (1 << (col + row + 3) ) * bank * m; -} - -/* - * Initialize PCI Devices, report devices found. - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_debris_config_table[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID, - pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID, - pci_cfgfunc_config_device, { PCI_ENET1_IOADDR, - PCI_ENET1_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, - { } -}; -#endif - -struct pci_controller hose = { -#ifndef CONFIG_PCI_PNP - config_table: pci_debris_config_table, -#endif -}; - -void pci_init_board(void) -{ - pci_mpc824x_init(&hose); -} - -void *nvram_read(void *dest, const long src, size_t count) -{ - volatile uchar *d = (volatile uchar*) dest; - volatile uchar *s = (volatile uchar*) src; - while(count--) { - *d++ = *s++; - asm volatile("sync"); - } - return dest; -} - -void nvram_write(long dest, const void *src, size_t count) -{ - volatile uchar *d = (volatile uchar*)dest; - volatile uchar *s = (volatile uchar*)src; - while(count--) { - *d++ = *s++; - asm volatile("sync"); - } -} - -int misc_init_r(void) -{ - uchar ethaddr[6]; - - if (eth_getenv_enetaddr("ethaddr", ethaddr)) - /* Write ethernet addr in NVRAM for VxWorks */ - nvram_write(CONFIG_ENV_ADDR + CONFIG_SYS_NVRAM_VXWORKS_OFFS, - ethaddr, 6); - - return 0; -} - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} diff --git a/board/etin/debris/flash.c b/board/etin/debris/flash.c deleted file mode 100644 index 2657958..0000000 --- a/board/etin/debris/flash.c +++ /dev/null @@ -1,705 +0,0 @@ -/* - * board/eva/flash.c - * - * (C) Copyright 2002 - * Sangmoon Kim, Etin Systems, dogoil@etinsys.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/processor.h> -#include <asm/pci_io.h> -#include <mpc824x.h> -#include <asm/mmu.h> - -int (*do_flash_erase)(flash_info_t*, uint32_t, uint32_t); -int (*write_dword)(flash_info_t*, ulong, uint64_t); - -typedef uint64_t cfi_word; - -#define cfi_read(flash, addr) *((volatile cfi_word*)(flash->start[0] + addr)) - -#define cfi_write(flash, val, addr) \ - move64((cfi_word*)&val, \ - (cfi_word*)(flash->start[0] + addr)) - -#define CMD(x) ((((cfi_word)x)<<48)|(((cfi_word)x)<<32)|(((cfi_word)x)<<16)|(((cfi_word)x))) - -static void write32(unsigned long addr, uint32_t value) -{ - *(volatile uint32_t*)(addr) = value; - asm volatile("sync"); -} - -static uint32_t read32(unsigned long addr) -{ - uint32_t value; - value = *(volatile uint32_t*)addr; - asm volatile("sync"); - return value; -} - -static cfi_word cfi_cmd(flash_info_t *flash, uint8_t cmd, uint32_t addr) -{ - uint32_t base = flash->start[0]; - uint32_t val=(cmd << 16) | cmd; - addr <<= 3; - write32(base + addr, val); - return addr; -} - -static uint16_t cfi_read_query(flash_info_t *flash, uint32_t addr) -{ - uint32_t base = flash->start[0]; - addr <<= 3; - return (uint16_t)read32(base + addr); -} - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -static void move64(uint64_t *src, uint64_t *dest) -{ - asm volatile("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ - "stfd 0, 0(4)" /* *dest = fpr0 */ - : : : "fr0" ); /* Clobbers fr0 */ - return; -} - -static int cfi_write_dword(flash_info_t *flash, ulong dest, cfi_word data) -{ - unsigned long start; - cfi_word status = 0; - - status = cfi_read(flash, dest); - data &= status; - - cfi_cmd(flash, 0x40, 0); - cfi_write(flash, data, dest); - - udelay(10); - start = get_timer (0); - for(;;) { - status = cfi_read(flash, dest); - status &= CMD(0x80); - if(status == CMD(0x80)) - break; - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - cfi_cmd(flash, 0xff, 0); - return 1; - } - udelay(1); - } - cfi_cmd(flash, 0xff, 0); - - return 0; -} - -static int jedec_write_dword (flash_info_t *flash, ulong dest, cfi_word data) -{ - ulong start; - cfi_word status = 0; - - status = cfi_read(flash, dest); - if(status != CMD(0xffff)) return 2; - - cfi_cmd(flash, 0xaa, 0x555); - cfi_cmd(flash, 0x55, 0x2aa); - cfi_cmd(flash, 0xa0, 0x555); - - cfi_write(flash, data, dest); - - udelay(10); - start = get_timer (0); - status = ~data; - while(status != data) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) - return 1; - status = cfi_read(flash, dest); - udelay(1); - } - return 0; -} - -static __inline__ unsigned long get_msr(void) -{ - unsigned long msr; - __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :); - return msr; -} - -static __inline__ void set_msr(unsigned long msr) -{ - __asm__ __volatile__ ("mtmsr %0" : : "r" (msr)); -} - -int write_buff (flash_info_t *flash, uchar *src, ulong addr, ulong cnt) -{ - ulong wp; - int i, s, l, rc; - cfi_word data; - uint8_t *t = (uint8_t*)&data; - unsigned long base = flash->start[0]; - uint32_t msr; - - if (flash->flash_id == FLASH_UNKNOWN) - return 4; - - if (cnt == 0) - return 0; - - addr -= base; - - msr = get_msr(); - set_msr(msr|MSR_FP); - - wp = (addr & ~7); /* get lower word aligned address */ - - if((addr-wp) != 0) { - data = cfi_read(flash, wp); - s = addr & 7; - l = ( cnt < (8-s) ) ? cnt : (8-s); - for(i = 0; i < l; i++) - t[s+i] = *src++; - if ((rc = write_dword(flash, wp, data)) != 0) - goto DONE; - wp += 8; - cnt -= l; - } - - while (cnt >= 8) { - for (i = 0; i < 8; i++) - t[i] = *src++; - if ((rc = write_dword(flash, wp, data)) != 0) - goto DONE; - wp += 8; - cnt -= 8; - } - - if (cnt == 0) { - rc = 0; - goto DONE; - } - - data = cfi_read(flash, wp); - for(i = 0; i < cnt; i++) - t[i] = *src++; - rc = write_dword(flash, wp, data); -DONE: - set_msr(msr); - return rc; -} - -static int cfi_erase_oneblock(flash_info_t *flash, uint32_t sect) -{ - int sa; - int flag; - ulong start, last, now; - cfi_word status; - - flag = disable_interrupts(); - - sa = (flash->start[sect] - flash->start[0]); - write32(flash->start[sect], 0x00200020); - write32(flash->start[sect], 0x00d000d0); - - if (flag) - enable_interrupts(); - - udelay(1000); - start = get_timer (0); - last = start; - - for (;;) { - status = cfi_read(flash, sa); - status &= CMD(0x80); - if (status == CMD(0x80)) - break; - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - cfi_cmd(flash, 0xff, 0); - printf ("Timeout\n"); - return ERR_TIMOUT; - } - - if ((now - last) > 1000) { - serial_putc ('.'); - last = now; - } - udelay(10); - } - cfi_cmd(flash, 0xff, 0); - return ERR_OK; -} - -static int cfi_erase(flash_info_t *flash, uint32_t s_first, uint32_t s_last) -{ - int sect; - int rc = ERR_OK; - - for (sect = s_first; sect <= s_last; sect++) { - if (flash->protect[sect] == 0) { - rc = cfi_erase_oneblock(flash, sect); - if (rc != ERR_OK) break; - } - } - printf (" done\n"); - return rc; -} - -static int jedec_erase(flash_info_t *flash, uint32_t s_first, uint32_t s_last) -{ - int sect; - cfi_word status; - int sa = -1; - int flag; - ulong start, last, now; - - flag = disable_interrupts(); - - cfi_cmd(flash, 0xaa, 0x555); - cfi_cmd(flash, 0x55, 0x2aa); - cfi_cmd(flash, 0x80, 0x555); - cfi_cmd(flash, 0xaa, 0x555); - cfi_cmd(flash, 0x55, 0x2aa); - for ( sect = s_first; sect <= s_last; sect++) { - if (flash->protect[sect] == 0) { - sa = flash->start[sect] - flash->start[0]; - write32(flash->start[sect], 0x00300030); - } - } - if (flag) - enable_interrupts(); - - if (sa < 0) - goto DONE; - - udelay (1000); - start = get_timer (0); - last = start; - for(;;) { - status = cfi_read(flash, sa); - if (status == CMD(0xffff)) - break; - - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return ERR_TIMOUT; - } - - if ((now - last) > 1000) { - serial_putc ('.'); - last = now; - } - udelay(10); - } -DONE: - cfi_cmd(flash, 0xf0, 0); - - printf (" done\n"); - - return ERR_OK; -} - -int flash_erase (flash_info_t *flash, int s_first, int s_last) -{ - int sect; - int prot; - - if ((s_first < 0) || (s_first > s_last)) { - if (flash->flash_id == FLASH_UNKNOWN) - printf ("- missing\n"); - else - printf ("- no sectors to erase\n"); - return ERR_NOT_ERASED; - } - if (flash->flash_id == FLASH_UNKNOWN) { - printf ("Can't erase unknown flash type - aborted\n"); - return ERR_NOT_ERASED; - } - - prot = 0; - for (sect = s_first; sect <= s_last; sect++) - if (flash->protect[sect]) prot++; - - if (prot) - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - else - printf ("\n"); - - return do_flash_erase(flash, s_first, s_last); -} - -struct jedec_flash_info { - const uint16_t mfr_id; - const uint16_t dev_id; - const char *name; - const int DevSize; - const int InterfaceDesc; - const int NumEraseRegions; - const ulong regions[4]; -}; - -#define ERASEINFO(size,blocks) (size<<8)|(blocks-1) - -#define SIZE_1MiB 20 -#define SIZE_2MiB 21 -#define SIZE_4MiB 22 - -static const struct jedec_flash_info jedec_table[] = { - { - mfr_id: (uint16_t)AMD_MANUFACT, - dev_id: (uint16_t)AMD_ID_LV800T, - name: "AMD AM29LV800T", - DevSize: SIZE_1MiB, - NumEraseRegions: 4, - regions: {ERASEINFO(0x10000,15), - ERASEINFO(0x08000,1), - ERASEINFO(0x02000,2), - ERASEINFO(0x04000,1) - } - }, { - mfr_id: (uint16_t)AMD_MANUFACT, - dev_id: (uint16_t)AMD_ID_LV800B, - name: "AMD AM29LV800B", - DevSize: SIZE_1MiB, - NumEraseRegions: 4, - regions: {ERASEINFO(0x10000,15), - ERASEINFO(0x08000,1), - ERASEINFO(0x02000,2), - ERASEINFO(0x04000,1) - } - }, { - mfr_id: (uint16_t)AMD_MANUFACT, - dev_id: (uint16_t)AMD_ID_LV160T, - name: "AMD AM29LV160T", - DevSize: SIZE_2MiB, - NumEraseRegions: 4, - regions: {ERASEINFO(0x10000,31), - ERASEINFO(0x08000,1), - ERASEINFO(0x02000,2), - ERASEINFO(0x04000,1) - } - }, { - mfr_id: (uint16_t)AMD_MANUFACT, - dev_id: (uint16_t)AMD_ID_LV160B, - name: "AMD AM29LV160B", - DevSize: SIZE_2MiB, - NumEraseRegions: 4, - regions: {ERASEINFO(0x04000,1), - ERASEINFO(0x02000,2), - ERASEINFO(0x08000,1), - ERASEINFO(0x10000,31) - } - }, { - mfr_id: (uint16_t)AMD_MANUFACT, - dev_id: (uint16_t)AMD_ID_LV320T, - name: "AMD AM29LV320T", - DevSize: SIZE_4MiB, - NumEraseRegions: 2, - regions: {ERASEINFO(0x10000,63), - ERASEINFO(0x02000,8) - } - - }, { - mfr_id: (uint16_t)AMD_MANUFACT, - dev_id: (uint16_t)AMD_ID_LV320B, - name: "AMD AM29LV320B", - DevSize: SIZE_4MiB, - NumEraseRegions: 2, - regions: {ERASEINFO(0x02000,8), - ERASEINFO(0x10000,63) - } - } -}; - -static ulong cfi_init(uint32_t base, flash_info_t *flash) -{ - int sector; - int block; - int block_count; - int offset = 0; - int reverse = 0; - int primary; - int mfr_id; - int dev_id; - - flash->start[0] = base; - cfi_cmd(flash, 0xF0, 0); - cfi_cmd(flash, 0x98, 0); - if ( !( cfi_read_query(flash, 0x10) == 'Q' && - cfi_read_query(flash, 0x11) == 'R' && - cfi_read_query(flash, 0x12) == 'Y' )) { - cfi_cmd(flash, 0xff, 0); - return 0; - } - - flash->size = 1 << cfi_read_query(flash, 0x27); - flash->size *= 4; - block_count = cfi_read_query(flash, 0x2c); - primary = cfi_read_query(flash, 0x15); - if ( cfi_read_query(flash, primary + 4) == 0x30) - reverse = (cfi_read_query(flash, 0x1) & 0x01); - else - reverse = (cfi_read_query(flash, primary+15) == 3); - - flash->sector_count = 0; - - for ( block = reverse ? block_count - 1 : 0; - reverse ? block >= 0 : block < block_count; - reverse ? block-- : block ++) { - int sector_size = - (cfi_read_query(flash, 0x2d + block*4+2) | - (cfi_read_query(flash, 0x2d + block*4+3) << 8)) << 8; - int sector_count = - (cfi_read_query(flash, 0x2d + block*4+0) | - (cfi_read_query(flash, 0x2d + block*4+1) << 8)) + 1; - for(sector = 0; sector < sector_count; sector++) { - flash->start[flash->sector_count++] = base + offset; - offset += sector_size * 4; - } - } - mfr_id = cfi_read_query(flash, 0x00); - dev_id = cfi_read_query(flash, 0x01); - - cfi_cmd(flash, 0xff, 0); - - flash->flash_id = (mfr_id << 16) | dev_id; - - for (sector = 0; sector < flash->sector_count; sector++) { - write32(flash->start[sector], 0x00600060); - write32(flash->start[sector], 0x00d000d0); - } - cfi_cmd(flash, 0xff, 0); - - for (sector = 0; sector < flash->sector_count; sector++) - flash->protect[sector] = 0; - - do_flash_erase = cfi_erase; - write_dword = cfi_write_dword; - - return flash->size; -} - -static ulong jedec_init(unsigned long base, flash_info_t *flash) -{ - int i; - int block, block_count; - int sector, offset; - int mfr_id, dev_id; - flash->start[0] = base; - cfi_cmd(flash, 0xF0, 0x000); - cfi_cmd(flash, 0xAA, 0x555); - cfi_cmd(flash, 0x55, 0x2AA); - cfi_cmd(flash, 0x90, 0x555); - mfr_id = cfi_read_query(flash, 0x000); - dev_id = cfi_read_query(flash, 0x0001); - cfi_cmd(flash, 0xf0, 0x000); - - for(i=0; i<sizeof(jedec_table)/sizeof(struct jedec_flash_info); i++) { - if((jedec_table[i].mfr_id == mfr_id) && - (jedec_table[i].dev_id == dev_id)) { - - flash->flash_id = (mfr_id << 16) | dev_id; - flash->size = 1 << jedec_table[0].DevSize; - flash->size *= 4; - block_count = jedec_table[i].NumEraseRegions; - offset = 0; - flash->sector_count = 0; - for (block = 0; block < block_count; block++) { - int sector_size = jedec_table[i].regions[block]; - int sector_count = (sector_size & 0xff) + 1; - sector_size >>= 8; - for (sector=0; sector<sector_count; sector++) { - flash->start[flash->sector_count++] = - base + offset; - offset += sector_size * 4; - } - } - break; - } - } - - for (sector = 0; sector < flash->sector_count; sector++) - flash->protect[sector] = 0; - - do_flash_erase = jedec_erase; - write_dword = jedec_write_dword; - - return flash->size; -} - -inline void mtibat1u(unsigned int x) -{ - __asm__ __volatile__ ("mtspr 530, %0" :: "r" (x)); -} - -inline void mtibat1l(unsigned int x) -{ - __asm__ __volatile__ ("mtspr 531, %0" :: "r" (x)); -} - -inline void mtdbat1u(unsigned int x) -{ - __asm__ __volatile__ ("mtspr 538, %0" :: "r" (x)); -} - -inline void mtdbat1l(unsigned int x) -{ - __asm__ __volatile__ ("mtspr 539, %0" :: "r" (x)); -} - -unsigned long flash_init (void) -{ - unsigned long size = 0; - int i; - unsigned int msr; - - /* BAT1 */ - CONFIG_WRITE_WORD(ERCR3, 0x0C00000C); - CONFIG_WRITE_WORD(ERCR4, 0x0800000C); - msr = get_msr(); - set_msr(msr & ~(MSR_IR | MSR_DR)); - mtibat1l(0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT); - mtibat1u(0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP); - mtdbat1l(0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT); - mtdbat1u(0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP); - set_msr(msr); - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) - flash_info[i].flash_id = FLASH_UNKNOWN; - size = cfi_init(FLASH_BASE0_PRELIM, &flash_info[0]); - if (!size) - size = jedec_init(FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) - printf ("# Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", - size, size<<20); - - return size; -} - -void flash_print_info (flash_info_t *flash) -{ - int i; - int k; - int size; - int erased; - volatile unsigned long *p; - - if (flash->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - flash_init(); - } - - if (flash->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (((flash->flash_id) >> 16) & 0xff) { - case 0x01: - printf ("AMD "); - break; - case 0x04: - printf("FUJITSU "); - break; - case 0x20: - printf("STM "); - break; - case 0xBF: - printf("SST "); - break; - case 0x89: - case 0xB0: - printf("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch ((flash->flash_id) & 0xffff) { - case (uint16_t)AMD_ID_LV800T: - printf ("AM29LV800T\n"); - break; - case (uint16_t)AMD_ID_LV800B: - printf ("AM29LV800B\n"); - break; - case (uint16_t)AMD_ID_LV160T: - printf ("AM29LV160T\n"); - break; - case (uint16_t)AMD_ID_LV160B: - printf ("AM29LV160B\n"); - break; - case (uint16_t)AMD_ID_LV320T: - printf ("AM29LV320T\n"); - break; - case (uint16_t)AMD_ID_LV320B: - printf ("AM29LV320B\n"); - break; - case (uint16_t)INTEL_ID_28F800C3T: - printf ("28F800C3T\n"); - break; - case (uint16_t)INTEL_ID_28F800C3B: - printf ("28F800C3B\n"); - break; - case (uint16_t)INTEL_ID_28F160C3T: - printf ("28F160C3T\n"); - break; - case (uint16_t)INTEL_ID_28F160C3B: - printf ("28F160C3B\n"); - break; - case (uint16_t)INTEL_ID_28F320C3T: - printf ("28F320C3T\n"); - break; - case (uint16_t)INTEL_ID_28F320C3B: - printf ("28F320C3B\n"); - break; - case (uint16_t)INTEL_ID_28F640C3T: - printf ("28F640C3T\n"); - break; - case (uint16_t)INTEL_ID_28F640C3B: - printf ("28F640C3B\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - if (flash->size >= (1 << 20)) { - printf (" Size: %ld MB in %d Sectors\n", - flash->size >> 20, flash->sector_count); - } else { - printf (" Size: %ld kB in %d Sectors\n", - flash->size >> 10, flash->sector_count); - } - - printf (" Sector Start Addresses:"); - for (i = 0; i < flash->sector_count; ++i) { - /* Check if whole sector is erased*/ - if (i != (flash->sector_count-1)) - size = flash->start[i+1] - flash->start[i]; - else - size = flash->start[0] + flash->size - flash->start[i]; - - erased = 1; - p = (volatile unsigned long *)flash->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; k<size; k++) { - if (*p++ != 0xffffffff) { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf ("\n "); - - printf (" %08lX%s%s", - flash->start[i], - erased ? " E" : " ", - flash->protect[i] ? "RO " : " "); - } - printf ("\n"); -} diff --git a/board/etin/debris/phantom.c b/board/etin/debris/phantom.c deleted file mode 100644 index 3d5aa14..0000000 --- a/board/etin/debris/phantom.c +++ /dev/null @@ -1,301 +0,0 @@ -/* - * board/eva/phantom.c - * - * Phantom RTC device driver for EVA - * - * Author: Sangmoon Kim - * dogoil@etinsys.com - * - * Copyright 2002 Etinsys Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <rtc.h> - -#if defined(CONFIG_CMD_DATE) - -#define RTC_BASE (CONFIG_SYS_NVRAM_BASE_ADDR + 0x7fff8) - -#define RTC_YEAR ( RTC_BASE + 7 ) -#define RTC_MONTH ( RTC_BASE + 6 ) -#define RTC_DAY_OF_MONTH ( RTC_BASE + 5 ) -#define RTC_DAY_OF_WEEK ( RTC_BASE + 4 ) -#define RTC_HOURS ( RTC_BASE + 3 ) -#define RTC_MINUTES ( RTC_BASE + 2 ) -#define RTC_SECONDS ( RTC_BASE + 1 ) -#define RTC_CENTURY ( RTC_BASE + 0 ) - -#define RTC_CONTROLA RTC_CENTURY -#define RTC_CONTROLB RTC_SECONDS -#define RTC_CONTROLC RTC_DAY_OF_WEEK - -#define RTC_CA_WRITE 0x80 -#define RTC_CA_READ 0x40 - -#define RTC_CB_OSC_DISABLE 0x80 - -#define RTC_CC_BATTERY_FLAG 0x80 -#define RTC_CC_FREQ_TEST 0x40 - - -static int phantom_flag = -1; -static int century_flag = -1; - -static uchar rtc_read(unsigned int addr) -{ - return *(volatile unsigned char *)(addr); -} - -static void rtc_write(unsigned int addr, uchar val) -{ - *(volatile unsigned char *)(addr) = val; -} - -static unsigned char phantom_rtc_sequence[] = { - 0xc5, 0x3a, 0xa3, 0x5c, 0xc5, 0x3a, 0xa3, 0x5c -}; - -static unsigned char* phantom_rtc_read(int addr, unsigned char rtc[8]) -{ - int i, j; - unsigned char v; - unsigned char save = rtc_read(addr); - - for (j = 0; j < 8; j++) { - v = phantom_rtc_sequence[j]; - for (i = 0; i < 8; i++) { - rtc_write(addr, v & 1); - v >>= 1; - } - } - for (j = 0; j < 8; j++) { - v = 0; - for (i = 0; i < 8; i++) { - if(rtc_read(addr) & 1) - v |= 1 << i; - } - rtc[j] = v; - } - rtc_write(addr, save); - return rtc; -} - -static void phantom_rtc_write(int addr, unsigned char rtc[8]) -{ - int i, j; - unsigned char v; - unsigned char save = rtc_read(addr); - for (j = 0; j < 8; j++) { - v = phantom_rtc_sequence[j]; - for (i = 0; i < 8; i++) { - rtc_write(addr, v & 1); - v >>= 1; - } - } - for (j = 0; j < 8; j++) { - v = rtc[j]; - for (i = 0; i < 8; i++) { - rtc_write(addr, v & 1); - v >>= 1; - } - } - rtc_write(addr, save); -} - -static int get_phantom_flag(void) -{ - int i; - unsigned char rtc[8]; - - phantom_rtc_read(RTC_BASE, rtc); - - for(i = 1; i < 8; i++) { - if (rtc[i] != rtc[0]) - return 1; - } - return 0; -} - -void rtc_reset(void) -{ - if (phantom_flag < 0) - phantom_flag = get_phantom_flag(); - - if (phantom_flag) { - unsigned char rtc[8]; - phantom_rtc_read(RTC_BASE, rtc); - if(rtc[4] & 0x30) { - printf( "real-time-clock was stopped. Now starting...\n" ); - rtc[4] &= 0x07; - phantom_rtc_write(RTC_BASE, rtc); - } - } else { - uchar reg_a, reg_b, reg_c; - reg_a = rtc_read( RTC_CONTROLA ); - reg_b = rtc_read( RTC_CONTROLB ); - - if ( reg_b & RTC_CB_OSC_DISABLE ) - { - printf( "real-time-clock was stopped. Now starting...\n" ); - reg_a |= RTC_CA_WRITE; - reg_b &= ~RTC_CB_OSC_DISABLE; - rtc_write( RTC_CONTROLA, reg_a ); - rtc_write( RTC_CONTROLB, reg_b ); - } - - /* make sure read/write clock register bits are cleared */ - reg_a &= ~( RTC_CA_WRITE | RTC_CA_READ ); - rtc_write( RTC_CONTROLA, reg_a ); - - reg_c = rtc_read( RTC_CONTROLC ); - if (( reg_c & RTC_CC_BATTERY_FLAG ) == 0 ) - printf( "RTC battery low. Clock setting may not be reliable.\n"); - } -} - -static int get_century_flag(void) -{ - int flag = 0; - int bcd, century; - bcd = rtc_read( RTC_CENTURY ); - century = bcd2bin( bcd & 0x3F ); - rtc_write( RTC_CENTURY, bin2bcd(century+1)); - if (bcd == rtc_read( RTC_CENTURY )) - flag = 1; - rtc_write( RTC_CENTURY, bcd); - return flag; -} - -int rtc_get( struct rtc_time *tmp) -{ - if (phantom_flag < 0) - phantom_flag = get_phantom_flag(); - - if (phantom_flag) - { - unsigned char rtc[8]; - - phantom_rtc_read(RTC_BASE, rtc); - - tmp->tm_sec = bcd2bin(rtc[1] & 0x7f); - tmp->tm_min = bcd2bin(rtc[2] & 0x7f); - tmp->tm_hour = bcd2bin(rtc[3] & 0x1f); - tmp->tm_wday = bcd2bin(rtc[4] & 0x7); - tmp->tm_mday = bcd2bin(rtc[5] & 0x3f); - tmp->tm_mon = bcd2bin(rtc[6] & 0x1f); - tmp->tm_year = bcd2bin(rtc[7]) + 1900; - tmp->tm_yday = 0; - tmp->tm_isdst = 0; - - if( (rtc[3] & 0x80) && (rtc[3] & 0x40) ) tmp->tm_hour += 12; - if (tmp->tm_year < 1970) tmp->tm_year += 100; - } else { - uchar sec, min, hour; - uchar mday, wday, mon, year; - - int century; - - uchar reg_a; - - if (century_flag < 0) - century_flag = get_century_flag(); - - reg_a = rtc_read( RTC_CONTROLA ); - /* lock clock registers for read */ - rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_READ )); - - sec = rtc_read( RTC_SECONDS ); - min = rtc_read( RTC_MINUTES ); - hour = rtc_read( RTC_HOURS ); - mday = rtc_read( RTC_DAY_OF_MONTH ); - wday = rtc_read( RTC_DAY_OF_WEEK ); - mon = rtc_read( RTC_MONTH ); - year = rtc_read( RTC_YEAR ); - century = rtc_read( RTC_CENTURY ); - - /* unlock clock registers after read */ - rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_READ )); - - tmp->tm_sec = bcd2bin( sec & 0x7F ); - tmp->tm_min = bcd2bin( min & 0x7F ); - tmp->tm_hour = bcd2bin( hour & 0x3F ); - tmp->tm_mday = bcd2bin( mday & 0x3F ); - tmp->tm_mon = bcd2bin( mon & 0x1F ); - tmp->tm_wday = bcd2bin( wday & 0x07 ); - - if (century_flag) { - tmp->tm_year = bcd2bin( year ) + - ( bcd2bin( century & 0x3F ) * 100 ); - } else { - tmp->tm_year = bcd2bin( year ) + 1900; - if (tmp->tm_year < 1970) tmp->tm_year += 100; - } - - tmp->tm_yday = 0; - tmp->tm_isdst= 0; - } - - return 0; -} - -int rtc_set( struct rtc_time *tmp ) -{ - if (phantom_flag < 0) - phantom_flag = get_phantom_flag(); - - if (phantom_flag) { - uint year; - unsigned char rtc[8]; - - year = tmp->tm_year; - year -= (year < 2000) ? 1900 : 2000; - - rtc[0] = bin2bcd(0); - rtc[1] = bin2bcd(tmp->tm_sec); - rtc[2] = bin2bcd(tmp->tm_min); - rtc[3] = bin2bcd(tmp->tm_hour); - rtc[4] = bin2bcd(tmp->tm_wday); - rtc[5] = bin2bcd(tmp->tm_mday); - rtc[6] = bin2bcd(tmp->tm_mon); - rtc[7] = bin2bcd(year); - - phantom_rtc_write(RTC_BASE, rtc); - } else { - uchar reg_a; - if (century_flag < 0) - century_flag = get_century_flag(); - - /* lock clock registers for write */ - reg_a = rtc_read( RTC_CONTROLA ); - rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_WRITE )); - - rtc_write( RTC_MONTH, bin2bcd( tmp->tm_mon )); - - rtc_write( RTC_DAY_OF_WEEK, bin2bcd( tmp->tm_wday )); - rtc_write( RTC_DAY_OF_MONTH, bin2bcd( tmp->tm_mday )); - rtc_write( RTC_HOURS, bin2bcd( tmp->tm_hour )); - rtc_write( RTC_MINUTES, bin2bcd( tmp->tm_min )); - rtc_write( RTC_SECONDS, bin2bcd( tmp->tm_sec )); - - /* break year up into century and year in century */ - if (century_flag) { - rtc_write( RTC_YEAR, bin2bcd( tmp->tm_year % 100 )); - rtc_write( RTC_CENTURY, bin2bcd( tmp->tm_year / 100 )); - reg_a &= 0xc0; - reg_a |= bin2bcd( tmp->tm_year / 100 ); - } else { - rtc_write(RTC_YEAR, bin2bcd(tmp->tm_year - - ((tmp->tm_year < 2000) ? 1900 : 2000))); - } - - /* unlock clock registers after read */ - rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_WRITE )); - } - - return 0; -} - -#endif diff --git a/boards.cfg b/boards.cfg index fefe066..21968f3 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1236,7 +1236,6 @@ Orphan blackfin blackfin - - - Orphan powerpc mpc5xxx - matrix_vision mvbc_p MVBC_P MVBC_P:MVBC_P Andre Schwarz andre.schwarz@matrix-vision.de Orphan powerpc mpc5xxx - matrix_vision mvsmr MVSMR - Andre Schwarz andre.schwarz@matrix-vision.de Orphan powerpc mpc824x - - hidden_dragon HIDDEN_DRAGON - Yusdi Santoso yusdi_santoso@adaptec.com -Orphan powerpc mpc824x - etin - debris - Sangmoon Kim dogoil@etinsys.com Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK - Anton Vorontsov avorontsov@ru.mvista.com Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK_33 MPC8360ERDK:CLKIN_33MHZ Anton Vorontsov avorontsov@ru.mvista.com Orphan powerpc mpc83xx - matrix_vision mergerbox MERGERBOX - Andre Schwarz andre.schwarz@matrix-vision.de diff --git a/doc/README.scrapyard b/doc/README.scrapyard index a8312de..cbc373b 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +debris powerpc mpc824x - - Sangmoon Kim dogoil@etinsys.com kvme080 powerpc mpc824x - - Sangmoon Kim dogoil@etinsys.com ep8248 powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com ispan powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com diff --git a/include/configs/debris.h b/include/configs/debris.h deleted file mode 100644 index 4631b86..0000000 --- a/include/configs/debris.h +++ /dev/null @@ -1,443 +0,0 @@ -/* - * (C) Copyright 2001, 2002 - * Sangmoon Kim, Etin Systems, dogoil@etinsys.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -/* Environments */ - -/* bootargs */ -#define CONFIG_BOOTARGS \ - "console=ttyS0,9600 init=/linuxrc " \ - "root=/dev/nfs rw nfsroot=192.168.0.1:" \ - "/tftpboot/target " \ - "ip=192.168.0.2:192.168.0.1:192.168.0.1:" \ - "255.255.255.0:debris:eth0:none " \ - "mtdparts=phys:12m(root),-(kernel)" - -/* bootcmd */ -#define CONFIG_BOOTCOMMAND \ - "tftp 800000 pImage; " \ - "setenv bootargs console=ttyS0,9600 init=/linuxrc " \ - "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:eth0:none " \ - "mtdparts=phys:12m(root),-(kernel); " \ - "bootm 800000" - -/* bootdelay */ -#define CONFIG_BOOTDELAY 5 /* autoboot 5s */ - -/* baudrate */ -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ - -/* loads_echo */ -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ - -/* ethaddr */ -#undef CONFIG_ETHADDR - -/* eth2addr */ -#undef CONFIG_ETH2ADDR - -/* eth3addr */ -#undef CONFIG_ETH3ADDR - -/* ipaddr */ -#define CONFIG_IPADDR 192.168.0.2 - -/* serverip */ -#define CONFIG_SERVERIP 192.168.0.1 - -/* autoload */ -#undef CONFIG_SYS_AUTOLOAD - -/* rootpath */ -#define CONFIG_ROOTPATH "/tftpboot/target" - -/* gatewayip */ -#define CONFIG_GATEWAYIP 192.168.0.1 - -/* netmask */ -#define CONFIG_NETMASK 255.255.255.0 - -/* hostname */ -#define CONFIG_HOSTNAME debris - -/* bootfile */ -#define CONFIG_BOOTFILE "pImage" - -/* loadaddr */ -#define CONFIG_LOADADDR 800000 - -/* preboot */ -#undef CONFIG_PREBOOT - -/* clocks_in_mhz */ -#undef CONFIG_CLOCKS_IN_MHZ - - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8245 1 -#define CONFIG_DEBRIS 1 - -#if 0 -#define USE_DINK32 1 -#else -#undef USE_DINK32 -#endif - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 -#define CONFIG_DRAM_SPEED 100 /* MHz */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_KGDB -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP - -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_EEPRO100_SROM_WRITE - -#define PCI_ENET0_IOADDR 0x80000000 -#define PCI_ENET0_MEMADDR 0x80000000 -#define PCI_ENET1_IOADDR 0x81000000 -#define PCI_ENET1_MEMADDR 0x81000000 -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#if defined (USE_DINK32) -#define CONFIG_SYS_MONITOR_LEN 0x00040000 -#define CONFIG_SYS_MONITOR_BASE 0x00090000 -#define CONFIG_SYS_RAMBOOT 1 -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#else -#undef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_MONITOR_LEN 0x00040000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#endif - -#define CONFIG_SYS_FLASH_BASE 0x7C000000 -#define CONFIG_SYS_FLASH_SIZE (16*1024*1024) /* debris has tiny eeprom */ - -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */ - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */ -#define CONFIG_SYS_FLASH_RANGE_SIZE 0x01000000 -#define FLASH_BASE0_PRELIM 0x7C000000 /* debris flash */ - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ - -/* Use first bank for JFFS2, second bank contains U-Boot. - * - * Note: fake mtd_id's used, no linux mtd map file. - */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=debris-0" -#define MTDPARTS_DEFAULT "mtdparts=debris-0:-(jffs2)" -*/ - -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1 -#define CONFIG_ENV_ADDR 0xFF000000 /* right at the start of NVRAM */ -#define CONFIG_ENV_SIZE 0x400 /* Size of the Environment - 8K */ -#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ - -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xff000000 - -/* - * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_VXWORKS_OFFS = - * NV_RAM_ADDRS + NV_BOOT_OFFSET + NV_ENET_OFFSET - */ -#define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900 - -/* - * select i2c support configuration - * - * Supported configurations are {none, software, hardware} drivers. - * If the software driver is chosen, there are some additional - * configuration items that the driver uses to drive the port pins. - */ -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#ifdef CONFIG_SYS_I2C_SOFT -#error "Soft I2C is not configured properly. Please review!" -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#endif /* CONFIG_SYS_I2C_SOFT */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM } - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK 7372800 - -#define CONFIG_SYS_NS16550_COM1 0xFF080000 -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_NS16550_COM1 + 8) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_NS16550_COM1 + 16) -#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_NS16550_COM1 + 24) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3 - -#define CONFIG_SYS_DLL_EXTEND 0x00 -#define CONFIG_SYS_PCI_HOLD_DEL 0x20 - -#define CONFIG_SYS_ROMNAL 15 /* rom/flash next access time */ -#define CONFIG_SYS_ROMFAL 31 /* rom/flash access time */ - -#define CONFIG_SYS_REFINT 430 /* # of clocks between CBR refresh cycles */ - -#define CONFIG_SYS_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */ - -/* the following are for SDRAM only*/ -#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */ -#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */ -#define CONFIG_SYS_RDLAT 4 /* data latency from read command */ -#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#if 0 -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */ -#endif - -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 -#define CONFIG_SYS_REGDIMM 0 - - -/* memory bank settings*/ -/* - * only bits 20-29 are actually used from these vales to set the - * start/end address the upper two bits will be 0, and the lower 20 - * bits will be set to 0x00000 for a start address, or 0xfffff for an - * end address - */ -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (0x4000000 - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x04000000 -#define CONFIG_SYS_BANK1_END (0x8000000 - 1) -#define CONFIG_SYS_BANK1_ENABLE 1 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 -/* - * Memory bank enable bitmask, specifying which of the banks defined above - are actually present. MSB is for bank #7, LSB is for bank #0. - */ -#define CONFIG_SYS_BANK_ENABLE 0x01 - -#define CONFIG_SYS_ODCR 0x75 /* configures line driver impedances, */ - /* see 8240 book for bit definitions */ -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -/* SDRAM 0 - 256MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* stack in DCACHE @ 1GB (no backing mem) */ -#if defined(USE_DINK32) -#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 ) -#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K ) -#else -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#endif - -/* PCI memory */ -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Flash, config addrs, etc */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* values according to the manual */ - -#define CONFIG_DRAM_50MHZ 1 -#define CONFIG_SDRAM_50MHZ - -#define CONFIG_DISK_SPINUP_TIME 1000000 - -#endif /* __CONFIG_H */