Re: [U-Boot] U-Boot Digest, Vol 26, Issue 18
Hi,
I'm completely new here, but looking to ask what's the best way to send in a patch for the Xilinx SP601 board?
I've got it working and tested on two separate boards, however a key point is that I don't use the microblaze-generic functionality (just the microblaze) since I found it power pc specific.
Key features include: 10/100mb Emaclite Ethernet. (I tried using the gigabit Ethernet but only DMA mode rather than FIFO mode seemed close to working.) Flash support (ENV only in ram currently)
Best regards, and many thanks for U-Boot!
Billy.
Hi,
first of all please use any understandable email subject.
Billy Huang wrote:
Hi,
I'm completely new here, but looking to ask what's the best way to send in a patch for the Xilinx SP601 board?
I've got it working and tested on two separate boards, however a key point is that I don't use the microblaze-generic functionality (just the microblaze) since I found it power pc specific.
Please do not write that "a key point is that I don't use the microblaze-generic functionality". A lot of people use it and have no problem with it. Take a look at http://www.monstr.eu/wiki/doku.php?id=uboot:uboot If you don't know how to use it then you can create your own boards that's ok.
Regards, Michal
participants (2)
-
Billy Huang -
Michal Simek