Hi,

2018년 6월 4일 (월) 16:03, Seung-Woo Kim sw0312.kim@samsung.com님이 작성:

After the commit 9b643e312d52 ("treewide: replace with error() with pr_err()"), there are some pr_err() with no line break. Add missing line breaks.

Signed-off-by: Seung-Woo Kim sw0312.kim@samsung.com

board/samsung/common/exynos5-dt.c | 2 +- board/samsung/common/misc.c | 2 +- board/samsung/odroid/odroid.c | 12 ++++++------ 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c index 9f6f654..8c3a9ea 100644 --- a/board/samsung/common/exynos5-dt.c +++ b/board/samsung/common/exynos5-dt.c @@ -164,7 +164,7 @@ int board_usb_init(int index, enum usb_init_type init) samsung_get_base_usb3_phy();

    if (!phy) {

•           pr_err("usb3 phy not supported");
  

•           pr_err("usb3 phy not supported\n");
            return -ENODEV;
    }
  
  

diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c index c9df7e6..05243fc 100644 --- a/board/samsung/common/misc.c +++ b/board/samsung/common/misc.c @@ -456,7 +456,7 @@ void draw_logo(void)

    addr = panel_info.logo_addr;
    if (!addr) {

•           pr_err("There is no logo data.");
  

•           pr_err("There is no logo data.\n");
            return;
    }
  
  

diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index 1c2bd01..552333f 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -428,7 +428,7 @@ int exynos_power_init(void) };

    if (regulator_list_autoset(mmc_regulators, NULL, true))

•           pr_err("Unable to init all mmc regulators");
  

•           pr_err("Unable to init all mmc regulators\n");
  
    return 0;
  

} @@ -441,7 +441,7 @@ static int s5pc210_phy_control(int on)

    ret = regulator_get_by_platname("VDD_UOTG_3.0V", &dev);
    if (ret) {

•           pr_err("Regulator get error: %d", ret);
  

•           pr_err("Regulator get error: %d\n", ret);
            return ret;
    }
  
  

@@ -486,25 +486,25 @@ int board_usb_init(int index, enum usb_init_type init)

    ret = regulator_get_by_platname("VCC_P3V3_2.85V", &dev);
    if (ret) {

•           pr_err("Regulator get error: %d", ret);
  

•           pr_err("Regulator get error: %d\n", ret);
            return ret;
    }
  
    ret = regulator_set_enable(dev, true);
    if (ret) {
  

•           pr_err("Regulator %s enable setting error: %d", dev->name,
  

ret);

•           pr_err("Regulator %s enable setting error: %d\n",
  

dev->name, ret); return ret; }

    ret = regulator_set_value(dev, 750000);
    if (ret) {

•           pr_err("Regulator %s value setting error: %d", dev->name,
  

ret);

•           pr_err("Regulator %s value setting error: %d\n",
  

dev->name, ret); return ret; }

    ret = regulator_set_value(dev, 3300000);
    if (ret) {

•           pr_err("Regulator %s value setting error: %d", dev->name,
  

ret);

•           pr_err("Regulator %s value setting error: %d\n",
  

dev->name, ret); return ret; }

#endif

1.7.9.5

---

U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot

Reviewed-by: Minkyu Kang mk7.kang@samsung.com

Thanks, Minkyu Kang.