Add the System Reset Extension and the Hart State Management Extension definitions.
Add missing RFENCE Extension enum values.
The SBI 0.1 extension constants are needed for the sbi command. Remove an #ifdef.
Cf. https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc
Signed-off-by: Heinrich Schuchardt xypron.glpk@gmx.de --- v3: add SBI_HSM_HART_STATUS_SUSPENDED, SBI_HSM_HART_STATUS_SUSPEND_PENDING, SBI_HSM_HART_STATUS_RESUME_PENDING v2: correct constants that were blindly copied from Linux --- arch/riscv/include/asm/sbi.h | 40 ++++++++++++++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h index 53ca316180..e9caa78d17 100644 --- a/arch/riscv/include/asm/sbi.h +++ b/arch/riscv/include/asm/sbi.h @@ -12,7 +12,6 @@ #include <linux/types.h>
enum sbi_ext_id { -#ifdef CONFIG_SBI_V01 SBI_EXT_0_1_SET_TIMER = 0x0, SBI_EXT_0_1_CONSOLE_PUTCHAR = 0x1, SBI_EXT_0_1_CONSOLE_GETCHAR = 0x2, @@ -22,11 +21,12 @@ enum sbi_ext_id { SBI_EXT_0_1_REMOTE_SFENCE_VMA = 0x6, SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID = 0x7, SBI_EXT_0_1_SHUTDOWN = 0x8, -#endif SBI_EXT_BASE = 0x10, SBI_EXT_TIME = 0x54494D45, SBI_EXT_IPI = 0x735049, SBI_EXT_RFENCE = 0x52464E43, + SBI_EXT_HSM = 0x48534D, + SBI_EXT_SRST = 0x53525354, };
enum sbi_ext_base_fid { @@ -51,6 +51,42 @@ enum sbi_ext_rfence_fid { SBI_EXT_RFENCE_REMOTE_FENCE_I = 0, SBI_EXT_RFENCE_REMOTE_SFENCE_VMA, SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID, + SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA_VMID, + SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA, + SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA_ASID, + SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA, +}; + +enum sbi_ext_hsm_fid { + SBI_EXT_HSM_HART_START = 0, + SBI_EXT_HSM_HART_STOP, + SBI_EXT_HSM_HART_STATUS, + SBI_EXT_HSM_HART_SUSPEND, +}; + +enum sbi_hsm_hart_status { + SBI_HSM_HART_STATUS_STARTED = 0, + SBI_HSM_HART_STATUS_STOPPED, + SBI_HSM_HART_STATUS_START_PENDING, + SBI_HSM_HART_STATUS_STOP_PENDING, + SBI_HSM_HART_STATUS_SUSPENDED, + SBI_HSM_HART_STATUS_SUSPEND_PENDING, + SBI_HSM_HART_STATUS_RESUME_PENDING, +}; + +enum sbi_ext_srst_fid { + SBI_EXT_SRST_RESET = 0, +}; + +enum sbi_srst_reset_type { + SBI_SRST_RESET_TYPE_SHUTDOWN = 0, + SBI_SRST_RESET_TYPE_COLD_REBOOT, + SBI_SRST_RESET_TYPE_WARM_REBOOT, +}; + +enum sbi_srst_reset_reason { + SBI_SRST_RESET_REASON_NONE = 0, + SBI_SRST_RESET_REASON_SYS_FAILURE, };
#ifdef CONFIG_SBI_V01 -- 2.30.2