Scott,
Did you use u-boot.bin file? It is now u-boot-dtb.bin image.
York
-------- Original message -------- From: Wood Scott-B07421 Date:08/27/2015 4:32 PM (GMT-06:00) To: Sun York-R58495 Cc: u-boot@lists.denx.de Subject: ls2085ardb not booting
I'm unable to boot ls2085ardb on the current tree. I get no console output. v2015.07 gives some output, but hangs at:
U-Boot 2015.07 (Aug 27 2015 - 16:24:43 -0500) LS2085A-RDB
Clock Configuration: CPU0(A57):1600 MHz CPU1(A57):1600 MHz CPU2(A57):1600 MHz CPU3(A57):1600 MHz CPU4(A57):1600 MHz CPU5(A57):1600 MHz CPU6(A57):1600 MHz CPU7(A57):1600 MHz Bus: 600 MHz DDR: 1333.333 MHz DP-DDR: 1333.333 MHz Reset Configuration Word (RCW): 00: 40282830 40400040 00000000 00000000 10: 00000000 00200000 00200000 00000000 20: 00c12980 00002580 00000000 00000000 30: 00000e0b 00000000 00000000 00000000 40: 00000000 00000000 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00027000 00000000 70: 412a0000 00000000 00000000 00000000 Board: LS2085A-RDB, Board Arch: V1, Board version: C, boot from vBank: 4 FPGA: v1.18 SERDES1 Reference : Clock1 = 156.25MHz Clock2 = 156.25MHz SERDES2 Reference : Clock1 = 100MHz Clock2 = 100MHz I2C: ready DRAM: Initializing DDR....using SPD Detected UDIMM 18ASF1G72AZ-2G1A1 Detected UDIMM 18ASF1G72AZ-2G1A1 There is no rank on CS0 for controller 1. Controler 1 timeout, debug_2 = 2100 Controler 1 timeout, debug_2 = 2500 Waiting for D_INIT timeout. Memory may not work. DP-DDR: Detected UDIMM 18ASF1G72AZ-2G1A1 19.5 GiB DDR 15.5 GiB (DDR4, 64-bit, CL=9, ECC on) DDR Chip-Select Interleaving Mode: CS0+CS1 DP-DDR 4 GiB (DDR4, 32-bit, CL=9, ECC on) DDR Chip-Select Interleaving Mode: CS0+CS1
The internal bringup branch does boot on the same board, with the same RCW.
-Scott