Hello U-Boot community,
This is my first mail to this mailing list, so I quickly present myself and expose my problem .
I am Florian Manoel, working for Siemens AG in Germany. We are developing a custom board based on the processor NXP QorlQ Layerscape LS1043a (quad Cortex-A53 64-bit cores). We choosed to boot on QSPI memory.
Some works have already been done for our custom board concerning U-Boot :
* Specific _defconfig and other files * NXP prebootloader configured for QSPI Boot * Specific Lauterbach scripts * Adding the QSPI memory to the Device Tree * Adding the freescale(NXP) SPI drivers to the config * ...
We are now at the point where U-Boot compiles, boots on our board up to the console.
However, while making some test, I notice that the command 'saveenv' fails (Failed (-2)). I searched information on the net without success.
So, I would like to get support concerning this problem. Did some of you already use this memory (Macronix MX25U25645GMI00) in QSPI mode ? If yes, did you also encounter this problem ?
Any advice are welcome.
Of course, I can provide more details.
Mit freundlichen Grüßen Florian Manoël
Siemens AG Digital Industries Process Automation Software House Khe DI PA CI R&D 2 Östliche Rheinbrückenstr. 50 76187 Karlsruhe, Deutschland Tel.: +49 721 595-1433 mailto:florian.manoel@siemens.com www.siemens.com/ingenuityforlifehttps://siemens.com/ingenuityforlife
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Jim Hagemann Snabe; Vorstand: Joe Kaeser, Vorsitzender; Roland Busch, Lisa Davis, Klaus Helmrich, Janina Kugel, Cedrik Neike, Michael Sen, Ralf P. Thomas; Sitz der Gesellschaft: Berlin und München, Deutschland; Registergericht: Berlin Charlottenburg, HRB 12300, München, HRB 6684; WEEE-Reg.-Nr. DE 23691322