On Wednesday 15 June 2005 11:59, David Grab wrote:
Hello,
my u-boot is now booting from flash. Big thanks to everyone helped me. ;-)
But now i am configuring ethernet in u-boot for my 440GX Board. It uses Marvel 88E1111 PHY´s. Did someone worked with this PHY and u-boot or knows if it is supported?
config file definitions:
#define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0x5 /* PHY address, See schematics */ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CONFIG_NETMASK 255.255.252.0 #define CONFIG_IPADDR 192.168.0.116 #define CONFIG_ETHADDR 00:04:AC:E3:28:8A
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_IRQ | \ CFG_CMD_I2C | \ CFG_CMD_BEDBUG | \ CFG_CMD_ENV | \ CFG_CMD_MII | \ CFG_CMD_DIAG | \ CFG_CMD_PING | \ CFG_CMD_NET | \ CFG_CMD_ELF )
Thanks for any help,
Hi,
I know, that the MPC85xx CPU specific part contains support for the Marvel 88E1111, check the file tsec.c in u-boot/cpu/mpc85xx
Hope this help Gerhard