Reviewed-by: Jaehoon Chung jh80.chung@samsung.com
Sorry, Forgot to add Reviewed-by: https://patchwork.ozlabs.org/project/uboot/patch/20210724081009.15761-8-asho...
Thanks, Ashok
-----Original Message----- From: Ashok Reddy Soma ashok.reddy.soma@xilinx.com Sent: Tuesday, July 27, 2021 6:07 PM To: u-boot@lists.denx.de Cc: peng.fan@nxp.com; jh80.chung@samsung.com; faiz_abbas@ti.com; sjg@chromium.org; michael@walle.cc; git git@xilinx.com; monstr@monstr.eu; somaashokreddy@gmail.com; Ashok Reddy Soma ashokred@xilinx.com Subject: [PATCH v2 8/8] mmc: zynq_sdhci: Use set_control_reg from sdhci.c
Since set_control_reg is available in sdhci.c, use it and remove arasan_sdhci_set_control_reg().
Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@xilinx.com
(no changes since v1)
drivers/mmc/zynq_sdhci.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-)
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index e71ba4eee0..4becd8c7ba 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -603,29 +603,10 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev) "clk-phase-mmc-hs400"); }
-static void arasan_sdhci_set_control_reg(struct sdhci_host *host) -{
- struct mmc *mmc = (struct mmc *)host->mmc;
- u32 reg;
- if (!IS_SD(mmc))
return;- if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);reg |= SDHCI_CTRL_VDD_180;sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);- }
- if (mmc->selected_mode > SD_HS &&
mmc->selected_mode <= MMC_HS_200)sdhci_set_uhs_timing(host);-}
static const struct sdhci_ops arasan_ops = { .platform_execute_tuning = &arasan_sdhci_execute_tuning, .set_delay = &arasan_sdhci_set_tapdelay,
- .set_control_reg = &arasan_sdhci_set_control_reg,
- .set_control_reg = &sdhci_set_control_reg,
}; #endif
-- 2.17.1