Currently in set_fdtfile() we set the value of environment variable fdtfile unconditionally. The implies that a value in the environment will be ignored.
With the patch environment variable fdtfile will only be set if it does not yet exist. This requires that CONFIG_DEFAULT_FDT_FILE is not set.
Now the user can either set and save fdtfile interactively or in the U-Boot configuration to overrule the device-tree name chosen based on the hardware in set_fdtfile().
Reported-by: E Shattow lucent@gmail.com Signed-off-by: Heinrich Schuchardt heinrich.schuchardt@canonical.com --- v3: Rephrase last added sentence in doc/board/starfive/visionfive2.rst v2: new patch --- .../visionfive2/starfive_visionfive2.c | 4 ++++ configs/starfive_visionfive2_defconfig | 1 - doc/board/starfive/visionfive2.rst | 18 ++++++++++++++++++ 3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/board/starfive/visionfive2/starfive_visionfive2.c b/board/starfive/visionfive2/starfive_visionfive2.c index 78e118d5a05..76439179fa7 100644 --- a/board/starfive/visionfive2/starfive_visionfive2.c +++ b/board/starfive/visionfive2/starfive_visionfive2.c @@ -49,6 +49,10 @@ static void set_fdtfile(void) u8 version; const char *fdtfile;
+ fdtfile = env_get("fdtfile"); + if (fdtfile) + return; + version = get_pcb_revision_from_eeprom(); switch (version) { case 'a': diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig index 7a3f1d4dbdf..fa80d489f5e 100644 --- a/configs/starfive_visionfive2_defconfig +++ b/configs/starfive_visionfive2_defconfig @@ -40,7 +40,6 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="nvme scan; usb start; setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr};" -CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2.dtb" CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 CONFIG_DISPLAY_CPUINFO=y diff --git a/doc/board/starfive/visionfive2.rst b/doc/board/starfive/visionfive2.rst index abda8ac21bc..2c68df3ce4d 100644 --- a/doc/board/starfive/visionfive2.rst +++ b/doc/board/starfive/visionfive2.rst @@ -71,6 +71,24 @@ Now build the U-Boot SPL and U-Boot proper This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
+Device-tree selection +~~~~~~~~~~~~~~~~~~~~~ + +Depending on the board version U-Boot set variable $fdtfile to either +starfive/jh7110-starfive-visionfive-2-v1.2a.dtb or +starfive/jh7110-starfive-visionfive-2-v1.3b.dtb. + +To overrule this selection the variable can be set manually and saved in the +environment + +:: + + setenv fdtfile my_device-tree.dtb + env save + +or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to provide +a default value. + Flashing ~~~~~~~~