Added custom environment variables and rules to locate and load files (from uSD card) in order to boot Linux.
Signed-off-by: Purna Chandra Mandal purna.mandal@microchip.com ---
Changes in v2: None
arch/mips/dts/pic32mzda.dtsi | 13 +++++++++ arch/mips/dts/pic32mzda_sk.dts | 7 +++++ configs/pic32mzdask_defconfig | 2 ++ include/configs/pic32mzdask.h | 61 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 83 insertions(+)
diff --git a/arch/mips/dts/pic32mzda.dtsi b/arch/mips/dts/pic32mzda.dtsi index f518ba8..bdddb93 100644 --- a/arch/mips/dts/pic32mzda.dtsi +++ b/arch/mips/dts/pic32mzda.dtsi @@ -61,4 +61,17 @@ <0x1f801500 0x200>; /* out */ status = "disabled"; }; + + sdhci: sdhci@1f8ec000 { + compatible = "microchip,pic32mzda-sdhci"; + reg = <0x1f8ec000 0x100>; + interrupts = <191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock REF4CLK>, <&clock PB5CLK>; + clock-names = "base_clk", "sys_clk"; + bus-width = <4>; + cap-sd-highspeed; + clock-freq-min-max = <25000000>,<25000000>; + clock-irq-pins = <1>,<1>; + status = "disabled"; + }; }; diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts index 99e7f64..f886a0f 100644 --- a/arch/mips/dts/pic32mzda_sk.dts +++ b/arch/mips/dts/pic32mzda_sk.dts @@ -23,6 +23,9 @@ };
&clock { + microchip,refo2-frequency = <50000000>; + microchip,refo4-frequency = <25000000>; + microchip,refo5-frequency = <40000000>; status = "okay"; u-boot,dm-pre-reloc; }; @@ -36,3 +39,7 @@ status = "okay"; u-boot,dm-pre-reloc; }; + +&sdhci { + status = "okay"; +}; \ No newline at end of file diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig index 13760e6..d11eddd 100644 --- a/configs/pic32mzdask_defconfig +++ b/configs/pic32mzdask_defconfig @@ -19,3 +19,5 @@ CONFIG_CLK=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_FULL is not set CONFIG_PIC32_PINCTRL=y +CONFIG_DM_MMC=y +CONFIG_PIC32_SDHCI=y \ No newline at end of file diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index 3624107..52e53e9 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -84,6 +84,33 @@ */ #define CONFIG_OF_LIBFDT 1
+/*----------------------------------------------------------------------- + * SDHC Configuration + */ +#define CONFIG_SDHCI +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_MMC + +/*----------------------------------------------------------------------- + * File System Configuration + */ +/* FAT FS */ +#define CONFIG_DOS_PARTITION +#define CONFIG_PARTITION_UUIDS +#define CONFIG_SUPPORT_VFAT +#define CONFIG_FS_FAT +#define CONFIG_FAT_WRITE +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_PART +#define CONFIG_CMD_FAT + +/* EXT4 FS */ +#define CONFIG_FS_EXT4 +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE + /* ------------------------------------------------- * Environment */ @@ -97,4 +124,38 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after X seconds */ #undef CONFIG_BOOTARGS
+#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \ + "uenvfile=uEnv.txt\0" \ + "uenvaddr="__stringify(CONFIG_SYS_ENV_ADDR)"\0" \ + "scriptfile=boot.scr\0" \ + "ubootfile=u-boot.bin\0" \ + "importbootenv= " \ + "env import -t -r ${uenvaddr} ${filesize};\0" \ + \ + "mmcloadenv=fatload mmc 0 ${uenvaddr} ${uenvfile}\0" \ + "mmcloadscr=fatload mmc 0 ${uenvaddr} ${scriptfile}\0" \ + "mmcloadub=fatload mmc 0 ${loadaddr} ${ubootfile}\0" \ + \ + "loadbootenv=run mmcloadenv\0" \ + "loadbootscr=run mmcloadscr\0" \ + "bootcmd_root= " \ + "if run loadbootenv; then " \ + "echo Loaded environment ${uenvfile}; " \ + "run importbootenv; " \ + "fi; " \ + "if test -n "${bootcmd_uenv}" ; then " \ + "echo Running bootcmd_uenv ...; " \ + "run bootcmd_uenv; " \ + "fi; " \ + "if run loadbootscr; then " \ + "echo Jumping to ${scriptfile}; " \ + "source ${uenvaddr}; " \ + "fi; " \ + "echo Custom environment or script not found. " \ + "Aborting auto booting...; \0" \ + "" + +#define CONFIG_BOOTCOMMAND "run bootcmd_root" + #endif /* __PIC32MZDASK_CONFIG_H */