18 Dec
2022
18 Dec
'22
10:40 a.m.
On 2022/10/25 15:52, Peter Robinson wrote:
Initial support for the PinePhone Pro has now landed upstream in Linux 6.1 RC1 so sync the dts from upstream for initial support.
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3399-pinephone-pro.dts | 398 ++++++++++++++++++++++++++ 2 files changed, 399 insertions(+) create mode 100644 arch/arm/dts/rk3399-pinephone-pro.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 965895bc2a3..624c4f997c3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -153,6 +153,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ rk3399-nanopi-r4s.dtb \ rk3399-orangepi.dtb \ rk3399-pinebook-pro.dtb \
- rk3399-pinephone-pro.dtb \ rk3399-puma-haikou.dtb \ rk3399-roc-pc.dtb \ rk3399-roc-pc-mezzanine.dtb \
diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts new file mode 100644 index 00000000000..2e058c31502 --- /dev/null +++ b/arch/arm/dts/rk3399-pinephone-pro.dts @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/*
- Copyright (c) 2020 Martijn Braam martijn@brixit.nl
- Copyright (c) 2021 Kamil Trzciński ayufan@ayufan.eu
- */
+/*
- PinePhone Pro datasheet:
- */
+/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi"
+/ {
- model = "Pine64 PinePhonePro";
- compatible = "pine64,pinephone-pro", "rockchip,rk3399";
- chassis-type = "handset";
- aliases {
mmc0 = &sdio0;mmc1 = &sdmmc;mmc2 = &sdhci;- };
- chosen {
stdout-path = "serial2:115200n8";- };
- gpio-keys {
compatible = "gpio-keys";pinctrl-names = "default";pinctrl-0 = <&pwrbtn_pin>;key-power {debounce-interval = <20>;gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;label = "Power";linux,code = <KEY_POWER>;wakeup-source;};- };
- vcc_sys: vcc-sys-regulator {
compatible = "regulator-fixed";regulator-name = "vcc_sys";regulator-always-on;regulator-boot-on;- };
- vcc3v3_sys: vcc3v3-sys-regulator {
compatible = "regulator-fixed";regulator-name = "vcc3v3_sys";regulator-always-on;regulator-boot-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;vin-supply = <&vcc_sys>;- };
- vcca1v8_s3: vcc1v8-s3-regulator {
compatible = "regulator-fixed";regulator-name = "vcca1v8_s3";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;vin-supply = <&vcc3v3_sys>;regulator-always-on;regulator-boot-on;- };
- vcc1v8_codec: vcc1v8-codec-regulator {
compatible = "regulator-fixed";enable-active-high;gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;pinctrl-names = "default";pinctrl-0 = <&vcc1v8_codec_en>;regulator-name = "vcc1v8_codec";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;vin-supply = <&vcc3v3_sys>;- };
+};
+&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
+};
+&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
+};
+&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
+};
+&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
+};
+&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
+};
+&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
+};
+&emmc_phy {
- status = "okay";
+};
+&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
- rk818: pmic@1c {
compatible = "rockchip,rk818";reg = <0x1c>;interrupt-parent = <&gpio1>;interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;#clock-cells = <1>;clock-output-names = "xin32k", "rk808-clkout2";pinctrl-names = "default";pinctrl-0 = <&pmic_int_l>;rockchip,system-power-controller;wakeup-source;vcc1-supply = <&vcc_sys>;vcc2-supply = <&vcc_sys>;vcc3-supply = <&vcc_sys>;vcc4-supply = <&vcc_sys>;vcc6-supply = <&vcc_sys>;vcc7-supply = <&vcc3v3_sys>;vcc8-supply = <&vcc_sys>;vcc9-supply = <&vcc3v3_sys>;regulators {vdd_cpu_l: DCDC_REG1 {regulator-name = "vdd_cpu_l";regulator-always-on;regulator-boot-on;regulator-min-microvolt = <875000>;regulator-max-microvolt = <975000>;regulator-ramp-delay = <6001>;regulator-state-mem {regulator-off-in-suspend;};};vdd_center: DCDC_REG2 {regulator-name = "vdd_center";regulator-always-on;regulator-boot-on;regulator-min-microvolt = <800000>;regulator-max-microvolt = <1000000>;regulator-ramp-delay = <6001>;regulator-state-mem {regulator-off-in-suspend;};};vcc_ddr: DCDC_REG3 {regulator-name = "vcc_ddr";regulator-always-on;regulator-boot-on;regulator-state-mem {regulator-on-in-suspend;};};vcc_1v8: DCDC_REG4 {regulator-name = "vcc_1v8";regulator-always-on;regulator-boot-on;regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-state-mem {regulator-on-in-suspend;};};vcca3v0_codec: LDO_REG1 {regulator-name = "vcca3v0_codec";regulator-min-microvolt = <3000000>;regulator-max-microvolt = <3000000>;};vcc3v0_touch: LDO_REG2 {regulator-name = "vcc3v0_touch";regulator-min-microvolt = <3000000>;regulator-max-microvolt = <3000000>;};vcca1v8_codec: LDO_REG3 {regulator-name = "vcca1v8_codec";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;};rk818_pwr_on: LDO_REG4 {regulator-name = "rk818_pwr_on";regulator-always-on;regulator-boot-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-state-mem {regulator-on-in-suspend;};};vcc_3v0: LDO_REG5 {regulator-name = "vcc_3v0";regulator-always-on;regulator-boot-on;regulator-min-microvolt = <3000000>;regulator-max-microvolt = <3000000>;regulator-state-mem {regulator-on-in-suspend;};};vcc_1v5: LDO_REG6 {regulator-name = "vcc_1v5";regulator-always-on;regulator-boot-on;regulator-min-microvolt = <1500000>;regulator-max-microvolt = <1500000>;regulator-state-mem {regulator-on-in-suspend;};};vcc1v8_dvp: LDO_REG7 {regulator-name = "vcc1v8_dvp";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;};vcc3v3_s3: LDO_REG8 {regulator-name = "vcc3v3_s3";regulator-always-on;regulator-boot-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-state-mem {regulator-off-in-suspend;};};vccio_sd: LDO_REG9 {regulator-name = "vccio_sd";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <3300000>;};vcc3v3_s0: SWITCH_REG {regulator-name = "vcc3v3_s0";regulator-always-on;regulator-boot-on;regulator-state-mem {regulator-on-in-suspend;};};};- };
- vdd_cpu_b: regulator@40 {
compatible = "silergy,syr827";reg = <0x40>;fcs,suspend-voltage-selector = <1>;pinctrl-names = "default";pinctrl-0 = <&vsel1_pin>;regulator-name = "vdd_cpu_b";regulator-min-microvolt = <875000>;regulator-max-microvolt = <1150000>;regulator-ramp-delay = <1000>;regulator-always-on;regulator-boot-on;regulator-state-mem {regulator-off-in-suspend;};- };
- vdd_gpu: regulator@41 {
compatible = "silergy,syr828";reg = <0x41>;fcs,suspend-voltage-selector = <1>;pinctrl-names = "default";pinctrl-0 = <&vsel2_pin>;regulator-name = "vdd_gpu";regulator-min-microvolt = <875000>;regulator-max-microvolt = <975000>;regulator-ramp-delay = <1000>;regulator-always-on;regulator-boot-on;regulator-state-mem {regulator-off-in-suspend;};- };
+};
+&cluster0_opp {
- opp04 {
status = "disabled";- };
- opp05 {
status = "disabled";- };
+};
+&cluster1_opp {
- opp06 {
opp-hz = /bits/ 64 <1500000000>;opp-microvolt = <1100000 1100000 1150000>;- };
- opp07 {
status = "disabled";- };
+};
+&io_domains {
- bt656-supply = <&vcc1v8_dvp>;
- audio-supply = <&vcca1v8_codec>;
- sdmmc-supply = <&vccio_sd>;
- gpio1830-supply = <&vcc_3v0>;
- status = "okay";
+};
+&pmu_io_domains {
- pmu1830-supply = <&vcc_1v8>;
- status = "okay";
+};
+&pinctrl {
- buttons {
pwrbtn_pin: pwrbtn-pin {rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;};- };
- pmic {
pmic_int_l: pmic-int-l {rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;};vsel1_pin: vsel1-pin {rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;};vsel2_pin: vsel2-pin {rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;};- };
- sound {
vcc1v8_codec_en: vcc1v8-codec-en {rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;};- };
+};
+&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- vmmc-supply = <&vcc3v3_sys>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
+};
+&sdhci {
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
+};
+&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
+};
+&uart2 {
- status = "okay";
+};