1 Sep
2021
1 Sep
'21
1:51 p.m.
Am 2021-09-01 13:24, schrieb Vladimir Oltean:
On Wed, Sep 01, 2021 at 10:55:21AM +0200, Michael Walle wrote:
usb0: usb3@3100000 {compatible = "fsl,layerscape-dwc3";reg = <0x0 0x3100000 0x0 0x10000>;interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;dr_mode = "host";status = "disabled";};usb1: usb3@3110000 {compatible = "fsl,layerscape-dwc3";reg = <0x0 0x3110000 0x0 0x10000>;interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;dr_mode = "host";
usb0: usb@3100000 {compatible = "fsl,ls1028a-dwc3", "snps,dwc3";reg = <0x0 0x3100000 0x0 0x10000>;interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;dr_mode = "host";snps,dis_rxdet_inp3_quirk;snps,quirk-frame-length-adjustment = <0x20>;snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;};usb1: usb@3110000 {compatible = "fsl,ls1028a-dwc3", "snps,dwc3";reg = <0x0 0x3110000 0x0 0x10000>;interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;dr_mode = "host";snps,dis_rxdet_inp3_quirk;snps,quirk-frame-length-adjustment = <0x20>;snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;};I see the status = 'disabled' was lost in the new bindings? This is strange considering that it is you who sent the patch to disable them in Linux, just yesterday: https://lkml.org/lkml/2021/8/31/426
Yes but that is on purpose. In the current u-boot device tree, it was disabled, but the boards reenabled them again. So it didn't matter.
I want to have a specific sync point (that is the v5.14 tag) for the .dtsi. At least where possible; for phy-mode and so on I needed to to take additional patches which weren't picked up in linux yet, but these just affect the sl28 board device trees.
-michael