On 2/19/20 2:09 PM, Heiko Schocher wrote:
Hello Holger,
Hi,
Am 19.02.2020 um 13:53 schrieb Holger Brunck:
The ownership has changed to ABB wiredcom for these boards. Therefore rename the keymile folder, headerfiles and vendor strings to wcom.
Signed-off-by: Holger Brunck holger.brunck@ch.abb.com CC: Marek Vasut marex@denx.de CC: Heiko Schocher hs@denx.de CC: Wolfgang Denk wd@denx.de CC: Valentin Longchamp valentin.longchamp@ch.abb.com
arch/arm/dts/kirkwood-km_kirkwood.dts | 4 +-- arch/arm/mach-kirkwood/Kconfig | 2 +- arch/powerpc/cpu/mpc83xx/Kconfig | 2 +- arch/powerpc/cpu/mpc85xx/Kconfig | 2 +- board/{keymile => wcom}/Kconfig | 6 ++-- board/{keymile => wcom}/common/common.c | 0 board/{keymile => wcom}/common/common.h | 0 board/{keymile => wcom}/common/ivm.c | 0 board/{keymile => wcom}/common/qrio.c | 2 +- board/{keymile => wcom}/common/qrio.h | 0 board/{keymile => wcom}/kmp204x/Kconfig | 2 +- board/{keymile => wcom}/kmp204x/MAINTAINERS | 2 +- board/{keymile => wcom}/kmp204x/Makefile | 0 board/{keymile => wcom}/kmp204x/ddr.c | 0 board/{keymile => wcom}/kmp204x/eth.c | 0 board/{keymile => wcom}/kmp204x/kmp204x.c | 0 board/{keymile => wcom}/kmp204x/kmp204x.h | 0 board/{keymile => wcom}/kmp204x/law.c | 0 board/{keymile => wcom}/kmp204x/pbi.cfg | 0 board/{keymile => wcom}/kmp204x/pci.c | 0 .../{keymile => wcom}/kmp204x/rcw_kmp204x.cfg | 0 board/{keymile => wcom}/kmp204x/tlb.c | 0 board/{keymile => wcom}/scripts/README | 2 +- .../{keymile => wcom}/scripts/develop-arm.txt | 0 .../scripts/develop-common.txt | 0 .../scripts/develop-ppc_82xx.txt | 0 .../scripts/develop-ppc_8xx.txt | 0 board/{keymile => wcom}/scripts/ramfs-arm.txt | 0 .../scripts/ramfs-common.txt | 0 .../scripts/ramfs-ppc_82xx.txt | 0 .../scripts/ramfs-ppc_8xx.txt | 0 .../{keymile/km83xx => wcom/wcom83xx}/Kconfig | 36 +++++++++---------- .../km83xx => wcom/wcom83xx}/MAINTAINERS | 2 +- .../km83xx => wcom/wcom83xx}/Makefile | 2 +- .../km83xx => wcom/wcom83xx}/README.kmeter1 | 0 .../km83xx.c => wcom/wcom83xx/wcom83xx.c} | 0 .../wcom83xx/wcom83xx_i2c.c} | 0 .../{keymile/km_arm => wcom/wcom_arm}/Kconfig | 4 +-- .../km_arm => wcom/wcom_arm}/MAINTAINERS | 2 +- .../km_arm => wcom/wcom_arm}/Makefile | 2 +- .../km_arm => wcom/wcom_arm}/fpga_config.c | 0 .../wcom_arm}/kwbimage-memphis.cfg | 0 .../km_arm => wcom/wcom_arm}/kwbimage.cfg | 0 .../wcom_arm}/kwbimage_128M16_1.cfg | 0 .../wcom_arm}/kwbimage_256M8_1.cfg | 0 .../km_arm.c => wcom/wcom_arm/wcom_arm.c} | 0 configs/km_kirkwood_128m16_defconfig | 2 +- configs/km_kirkwood_defconfig | 2 +- configs/km_kirkwood_pci_defconfig | 2 +- configs/kmcoge5un_defconfig | 2 +- configs/kmnusa_defconfig | 2 +- include/configs/km_kirkwood.h | 6 ++-- include/configs/kmcoge5ne.h | 10 +++--- include/configs/kmeter1.h | 10 +++--- include/configs/kmopti2.h | 10 +++--- include/configs/kmp204x.h | 8 ++--- include/configs/kmsupx5.h | 10 +++--- include/configs/kmtegr1.h | 10 +++--- include/configs/kmtepr2.h | 10 +++--- include/configs/suvd3.h | 10 +++---
This may now confilcts with my suvd3 remove patch, see:
http://patchwork.ozlabs.org/patch/1240178/
May you rebase this patch based on it?
This also conflicts with the secu1 patch, so I would wait until that one lands with sending a V2 and rebase the V2 on top of that. Otherwise this rename will only cause a terrible headache in merging all the patches in.