* Add Kconfig help describing the purpose of each command. * Add CONFIG_CMD_MDIO so it could be selected individually, as it doesn't depend on the mii command. * Add Kconfig imply to mii to automatically select the mdio command.
Signed-off-by: Ramon Fried rfried.dev@gmail.com --- cmd/Kconfig | 18 ++++++++++++++++-- cmd/Makefile | 4 +--- 2 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig index 98647f58b7..cfb3b58119 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1410,8 +1410,22 @@ config CMD_NFS
config CMD_MII bool "mii" - help - Enable MII utility commands. + imply CMD_MDIO + help + If set, allows 802.3(clause 22) MII Management functions interface access + The management interface specified in Clause 22 provides + a simple, two signal, serial interface to connect a + Station Management entity and a managed PHY for providing access + to management parameters and services. + The interface is referred to as the MII management interface. + +config CMD_MDIO + bool "mdio" + depends on PHYLIB + help + If set, allows Enable 802.3(clause 45) MDIO interface registers access + The MDIO interface is orthogonal to the MII interface and extends + it by adding access to more registers through indirect addressing.
config CMD_PING bool "ping" diff --git a/cmd/Makefile b/cmd/Makefile index ac843b4b16..384ddb8eaf 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -89,9 +89,7 @@ obj-$(CONFIG_CMD_MEMORY) += mem.o obj-$(CONFIG_CMD_IO) += io.o obj-$(CONFIG_CMD_MFSL) += mfsl.o obj-$(CONFIG_CMD_MII) += mii.o -ifdef CONFIG_PHYLIB -obj-$(CONFIG_CMD_MII) += mdio.o -endif +obj-$(CONFIG_CMD_MDIO) += mdio.o obj-$(CONFIG_CMD_MISC) += misc.o obj-$(CONFIG_CMD_MMC) += mmc.o obj-$(CONFIG_MP) += mp.o