Hi GVB,
Thanks for your earlier help.
As you suggested I have DOS to UNIX conversion. It worked. I have another proble now.
make: arm-none-linux-gnueabi-gcc: Command not found
$ make CROSS_COMPILE=arm-none-linux-gnueabi- omap3430sdp_config Configuring for omap3430sdp board...
[SNIP] $ make CROSS_COMPILE=arm-none-linux-gnueabi- make: arm-none-linux-gnueabi-gcc: Command not found make[1]: arm-none-linux-gnueabi-gcc: Command not found make[1]: Entering directory `/cygdrive/c/u-boot/tools' make[1]: Entering directory `/cygdrive/c/u-boot/tools' ln -s ../common/environment.c environment.c ln -s ../lib_generic/crc32.c crc32.c
Could please somebody tell me the solution for this.
Best Regards, Krishna.
From: Jerry Van Baren gerald.vanbaren@ge.com Subject: Re: [U-Boot-Users] Compilation problem for TI3430 board. To: hi_krishna01@yahoo.com, "U-Boot user list" u-boot@lists.denx.de Date: Friday, October 17, 2008, 11:06 AM Hi Radha,
Please don't top post.
Radha Krishna wrote:
Hi GVB, You are right. Could you tell me the solution.
Don't use DOS (aka Windows).
Since you already have a problem there, you can use "dos2unix" or equivalent. If you feel you must use Windows, many Windows editors (e.g. UltraEdit) allow you to control/convert line endings.
Best Regards, Kris.
[snip]
$ make CROSS_COMPILE=arm-none-linux-gnueabi-
omap3430sdp_config
./mkconfig: line 2: $'\r': command
not
found
make: *** [omap3430sdp_config] Error 127
Is that telling you that you have DOS line endings (<CR>+<LF> i.e. \r\n) as opposed to unix line endings (\n only)?
$ make CROSS_COMPILE=arm-none-linux-gnueabi- System not configured - see README make: *** [all] Error 1
Could somebody tell me steps to compile
U-Boot for
TI3430.
Best Regards, Krishna.
My best guess, gvb
HTH, gvb
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com