Hi
On Mon, May 16, 2022 at 9:10 AM Marcel Ziswiler marcel.ziswiler@toradex.com wrote:
On Mon, 2022-05-16 at 08:58 +0200, Michael Nazzareno Trimarchi wrote:
Hi
On Mon, May 16, 2022 at 8:51 AM Francesco Dolcini francesco.dolcini@toradex.com wrote:
Hello,
On Fri, May 13, 2022 at 08:00:31PM +0200, Michael Nazzareno Trimarchi wrote:
Il ven 13 mag 2022, 19:56 Fabio Estevam festevam@gmail.com ha scritto:
On Fri, May 13, 2022 at 2:41 PM Thierry Bultel thierry.bultel@linatsea.fr wrote:
There are error messages complaining about some bad blocks, including block 0x00000000.
Anyway block 0 is always guarantee by nand manufacturer, so having that bad look strange
I am aligned with Michael here, if you have a NAND device with block 0 bad there is something really wrong going on.
Can you see the SPL on console?
BTW: The datasheet should anybody still be in doubt [1].
[1] https://www.mxic.com.tw/Lists/Datasheet/Attachments/8460/MX30LF4G28AC,%203V,...
Block 0 is guaranteed to be good at least 1K P/E cycle (with ECC).
According to the datasheet. Question is if the bootrom using the ddtb is able to boot any way the SPL. If this happen the patches that are in review should help him to boot
Michael
Cheers
Marcel