Re: [U-Boot] [PATCH v3 5/5] sunxi: DT: add support for Pinebook

On 2018-10-17, Vasily Khoruzhick anarsoul@gmail.com wrote:

Pinebook is a laptop produced by Pine64, with USB-connected keyboard, USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP bridge from Analogix.

Signed-off-by: Vasily Khoruzhick anarsoul@gmail.com Acked-by: Maxime Ripard maxime.ripard@bootlin.com Tested-by: Maxime Ripard maxime.ripard@bootlin.com Cc: Vagrant Cascadian vagrant@debian.org

Working great on my pinebook! Thanks!

Depends on the sunxi-pwm fixes recently posted for working LCD backlight at the u-boot prompt:

https://patchwork.ozlabs.org/project/uboot/list/?series=71167

Tested-by: Vagrant Cascadian vagrant@debian.org

live well, vagrant

---

arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 + arch/arm/dts/sun50i-a64-pinebook.dts | 294 +++++++++++++++++++ configs/pinebook_defconfig | 22 ++ 4 files changed, 332 insertions(+) create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts create mode 100644 configs/pinebook_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index dfe9335a04..6b8ee81059 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -404,6 +404,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-orangepi-win.dtb \ sun50i-a64-pine64-plus.dtb \ sun50i-a64-pine64.dtb \

• sun50i-a64-pinebook.dtb \ sun50i-a64-sopine-baseboard.dtb

dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi new file mode 100644 index 0000000000..a99b7171d0 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/*

• • Copyright (C) 2018 Vasily Khoruzhick anarsoul@gmail.com
• */

+/* The ANX6345 eDP-bridge is on r_i2c */ +&r_i2c {

• anx6345: edp-bridge@38 {

• compatible = "analogix,anx6345";
  

• reg = <0x38>;
  

• reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
  

• status = "okay";
  

• };

+}; diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts new file mode 100644 index 0000000000..a3b0526ef6 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pinebook.dts @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/*

• • Copyright (C) 2017 Icenowy Zheng icenowy@aosc.xyz
• • Copyright (C) 2018 Vasily Khoruzhick anarsoul@gmail.com
• */

+/dts-v1/;

+#include "sun50i-a64.dtsi"

+#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h>

+/ {

• model = "Pinebook";
• compatible = "pine64,pinebook", "allwinner,sun50i-a64";
• aliases {

• serial0 = &uart0;
  

• ethernet0 = &rtl8723cs;
  

• };
• vdd_bl: regulator@0 {

• compatible = "regulator-fixed";
  

• regulator-name = "bl-3v3";
  

• regulator-min-microvolt = <3300000>;
  

• regulator-max-microvolt = <3300000>;
  

• gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
  

• enable-active-high;
  

• };
• backlight: backlight {

• compatible = "pwm-backlight";
  

• pwms = <&pwm 0 50000 0>;
  

• brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
  

• default-brightness-level = <2>;
  

• enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
  

• power-supply = <&vdd_bl>;
  

• };
• chosen {

• stdout-path = "serial0:115200n8";
  

• framebuffer-lcd {
  

• 	panel-supply = <&reg_dc1sw>;
  

• 	dvdd25-supply = <&reg_dldo2>;
  

• 	dvdd12-supply = <&reg_fldo1>;
  

• };
  

• };
• gpio_keys {

• compatible = "gpio-keys";
  

• lid_switch {
  

• 	label = "Lid Switch";
  

• 	gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
  

• 	linux,input-type = <EV_SW>;
  

• 	linux,code = <SW_LID>;
  

• 	linux,can-disable;
  

• 	wakeup-source;
  

• };
  

• };
• reg_vcc3v3: vcc3v3 {

• compatible = "regulator-fixed";
  

• regulator-name = "vcc3v3";
  

• regulator-min-microvolt = <3300000>;
  

• regulator-max-microvolt = <3300000>;
  

• };
• wifi_pwrseq: wifi_pwrseq {

• compatible = "mmc-pwrseq-simple";
  

• reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
  

• };

+};

+&ehci0 {

• phys = <&usbphy 0>;
• phy-names = "usb";
• status = "okay";

+};

+&ehci1 {

• status = "okay";

+};

+&mmc0 {

• pinctrl-names = "default";
• pinctrl-0 = <&mmc0_pins>;
• vmmc-supply = <&reg_dcdc1>;
• cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
• disable-wp;
• bus-width = <4>;
• status = "okay";

+};

+&mmc1 {

• pinctrl-names = "default";
• pinctrl-0 = <&mmc1_pins>;
• vmmc-supply = <&reg_dldo4>;
• vqmmc-supply = <&reg_eldo1>;
• mmc-pwrseq = <&wifi_pwrseq>;
• bus-width = <4>;
• non-removable;
• status = "okay";
• rtl8723cs: wifi@1 {

• reg = <1>;
  

• };

+};

+&mmc2 {

• pinctrl-names = "default";
• pinctrl-0 = <&mmc2_pins>;
• vmmc-supply = <&reg_dcdc1>;
• vqmmc-supply = <&reg_eldo1>;
• bus-width = <8>;
• non-removable;
• cap-mmc-hw-reset;
• mmc-hs200-1_8v;
• status = "okay";

+};

+&ohci0 {

• phys = <&usbphy 0>;
• phy-names = "usb";
• status = "okay";

+};

+&ohci1 {

• status = "okay";

+};

+&pwm {

• status = "okay";

+};

+&r_rsb {

• status = "okay";
• axp803: pmic@3a3 {

• compatible = "x-powers,axp803";
  

• reg = <0x3a3>;
  

• interrupt-parent = <&r_intc>;
  

• interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
  

• };

+};

+/* The ANX6345 eDP-bridge is on r_i2c */ +&r_i2c {

• clock-frequency = <100000>;
• pinctrl-names = "default";
• pinctrl-0 = <&r_i2c_pins_a>;
• status = "okay";

+};

+#include "axp803.dtsi"

+&reg_aldo1 {

• regulator-min-microvolt = <2800000>;
• regulator-max-microvolt = <2800000>;
• regulator-name = "vcc-csi";

+};

+&reg_aldo2 {

• regulator-always-on;
• regulator-min-microvolt = <1800000>;
• regulator-max-microvolt = <3300000>;
• regulator-name = "vcc-pl";

+};

+&reg_aldo3 {

• regulator-always-on;
• regulator-min-microvolt = <2700000>;
• regulator-max-microvolt = <3300000>;
• regulator-name = "vcc-pll-avcc";

+};

+&reg_dc1sw {

• regulator-name = "vcc-lcd";

+};

+&reg_dcdc1 {

• regulator-always-on;
• regulator-min-microvolt = <3300000>;
• regulator-max-microvolt = <3300000>;
• regulator-name = "vcc-3v3";

+};

+&reg_dcdc2 {

• regulator-always-on;
• regulator-min-microvolt = <1000000>;
• regulator-max-microvolt = <1300000>;
• regulator-name = "vdd-cpux";

+};

+/* DCDC3 is polyphased with DCDC2 */

+&reg_dcdc5 {

• regulator-always-on;
• regulator-min-microvolt = <1200000>;
• regulator-max-microvolt = <1200000>;
• regulator-name = "vcc-dram";

+};

+&reg_dcdc6 {

• regulator-always-on;
• regulator-min-microvolt = <1100000>;
• regulator-max-microvolt = <1100000>;
• regulator-name = "vdd-sys";

+};

+&reg_dldo1 {

• regulator-min-microvolt = <3300000>;
• regulator-max-microvolt = <3300000>;
• regulator-name = "vcc-hdmi";

+};

+&reg_dldo2 {

• regulator-min-microvolt = <2500000>;
• regulator-max-microvolt = <2500000>;
• regulator-name = "vcc-edp";

+};

+&reg_dldo3 {

• regulator-min-microvolt = <3300000>;
• regulator-max-microvolt = <3300000>;
• regulator-name = "avdd-csi";

+};

+&reg_dldo4 {

• regulator-min-microvolt = <3300000>;
• regulator-max-microvolt = <3300000>;
• regulator-name = "vcc-wifi";

+};

+&reg_eldo1 {

• regulator-always-on;
• regulator-min-microvolt = <1800000>;
• regulator-max-microvolt = <1800000>;
• regulator-name = "cpvdd";

+};

+&reg_eldo3 {

• regulator-min-microvolt = <1800000>;
• regulator-max-microvolt = <1800000>;
• regulator-name = "vdd-1v8-csi";

+};

+&reg_fldo1 {

• regulator-min-microvolt = <1200000>;
• regulator-max-microvolt = <1200000>;
• regulator-name = "vcc-1v2-hsic";

+};

+&reg_fldo2 {

• regulator-always-on;
• regulator-min-microvolt = <1100000>;
• regulator-max-microvolt = <1100000>;
• regulator-name = "vdd-cpus";

+};

+&reg_ldo_io0 {

• regulator-min-microvolt = <3300000>;
• regulator-max-microvolt = <3300000>;
• regulator-name = "vcc-usb";
• status = "okay";

+};

+&reg_rtc_ldo {

• regulator-name = "vcc-rtc";

+};

+&simplefb_hdmi {

• vcc-hdmi-supply = <&reg_dldo1>;

+};

+&uart0 {

• pinctrl-names = "default";
• pinctrl-0 = <&uart0_pins_a>;
• status = "okay";

+};

+&usb_otg {

• dr_mode = "host";

+};

+&usbphy {

• usb0_vbus-supply = <&reg_ldo_io0>;
• usb1_vbus-supply = <&reg_ldo_io0>;
• status = "okay";

+}; diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig new file mode 100644 index 0000000000..5294dbd2eb --- /dev/null +++ b/configs/pinebook_defconfig @@ -0,0 +1,22 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I=y +CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y +CONFIG_DRAM_CLK=552 +CONFIG_DRAM_ZQ=3881949 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_R_I2C_ENABLE=y +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook" +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_PWM=y +CONFIG_PWM_SUNXI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y +# CONFIG_USB_GADGET is not set +CONFIG_VIDEO_BRIDGE=y

+CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y

2.19.0