Convert the table to a correct reST table syntax.
Signed-off-by: Michael Walle mwalle@kernel.org --- doc/board/kontron/sl28.rst | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/doc/board/kontron/sl28.rst b/doc/board/kontron/sl28.rst index 2cb8ec62be4..5d47ce6c158 100644 --- a/doc/board/kontron/sl28.rst +++ b/doc/board/kontron/sl28.rst @@ -65,12 +65,14 @@ wdt command flags The `wdt start` as well as the `wdt expire` command take a flags argument. The supported bitmask is as follows.
-| Bit | Description | -| --- | ----------------------------- | -| 0 | Enable failsafe mode | -| 1 | Lock the control register | -| 2 | Disable board reset | -| 3 | Enable WDT_TIME_OUT# line | +=== ============================== +Bit Description +=== ============================== + 0 Enable failsafe mode + 1 Lock the control register + 2 Disable board reset + 3 Enable WDT_TIME_OUT# line +=== ==============================
For example, you can use `wdt expire 1` to issue a reset and boot into the failsafe bootloader.