Hi all,
I'm totally new to embedded linux/uboot, but I've been doing embedded work for going on 12 years so I'm not a total putz. We're working on early stages of design and I've been asked a couple of questions that I can't really answer. I don't need to know HOW to do these just yet (can figure that out later), I just need to know if it's possible to do. And before you ask I am RTFMing, I just don't have a lot of time to come up with answers to these questions and they're not jumping out of the FM at me. So:
1) Will u-boot support a compact flash device on the local bus of an MPC8347 (we would like to get u-boot from a small I2C EEPROM and everything else including the kernel from a large compact flash device)? 2) Is it possible to connect to u-boot's "console" from an enet port or can it only be accessed from a serial port? If it can, I presume it can then be used to load new versions of u-boot just like the serial port? (The reason for this is there may not be a serial port available in the final design for the customer to use for field upgrades and we're concerned about being able to upgrade u-boot if we need to ship a fix for it in the future.)
Thanks in advance.
Bruce Leonard Schweitzer Engineering Labs ---------------------------------- This e-mail may contain SEL confidential or legally privileged information. The opinions expressed are not necessarily those of SEL. Any unauthorized disclosure, distribution or other use is prohibited. If you received this e-mail in error, please notify the sender, permanently delete it, and destroy any printed copies.