Hi Fabio,
On 30/10/19 15:43, Fabio Estevam wrote:
Hi Walter,
On Wed, Oct 30, 2019 at 11:22 AM Walter Lozano walter.lozano@collabora.com wrote:
Thanks for your comments. My intention was to initially send the device tree patches and in a different patchset update the configuration, as it requires to run different tests (i.e. boot from SATA). Also I felt that this patch has meaning by itself, as it could be useful for people willing to test DM on this board.
It is preferred that you resend the dts pieces only when the cubox board is really converted to DM, otherwise you are only adding "dead code".
Thanks for the suggestion. I will wait for some SATA tests before re sending these patches.
Also the imx6dl-cubox-i-u-boot.dtb does not need to be explicitly added in the Makefile.
It gets built automatically by the core U-Boot Makefile logic.
Thanks for the information. I was confused by entries like "r8a7790-lager-u-boot.dtb" in the Makefile but you are right. I will take this into account for v2.
Thanks
Regards