26 Aug
2016
26 Aug
'16
3:25 p.m.
Hi Stefan,
On 26/07/2016 08:22, Stefan Agner wrote:
From: Stefan Agner stefan.agner@toradex.com
This patchset adds device tree support for Colibri iMX7S/iMX7D. It is the first device tree enabled board for any i.MX 7 SoC hence the patchset adds some common infrastructure:
- Add device tree support for serial_mxc.
- imx7.dtsi - I descided to leave the s/d suffix since the SoCs are very similar and boards will likely use runtime detection to distinguish the two available SoCs.
- The pinmux file imx7d-pinfunc.h is taken from the Kernel and stored in the same place
Otherwise the conversion is quite straightforward and simplified the board code somewhat. Two patches enhance the board support with PMIC support, which has been the driver for this conversion.
--
Applied (whole series) to u-boot-imx, thanks !
Best regards, Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================