On Thu, Aug 31, 2017 at 7:10 AM, Philipp Rossak embed3d@gmail.com wrote:
On 30.08.2017 18:59, Jagan Teki wrote:
On Wed, Aug 30, 2017 at 8:06 PM, Ondřej Jirman megi@xff.cz wrote:
Hi,
Jagan Teki píše v St 30. 08. 2017 v 19:48 +0530:
On Wed, Aug 30, 2017 at 2:40 PM, Philipp Rossak embed3d@gmail.com wrote:
Am 30.08.2017 um 08:47 schrieb Jagan Teki:
On Wed, Aug 30, 2017 at 6:02 AM, Philipp Rossak embed3d@gmail.com wrote: > > From: Philipp Rossak embed3d@gmail.com > > The sun8i emac hardware is present on the Nanopi M1. > It uses the internal PHY. > > Signed-off-by: Philipp Rossak embed3d@gmail.com > --- > arch/arm/dts/sun8i-h3-nanopi-m1.dts | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1.dts > b/arch/arm/dts/sun8i-h3-nanopi-m1.dts > index ec63d10..9c1c380 100644 > --- a/arch/arm/dts/sun8i-h3-nanopi-m1.dts > +++ b/arch/arm/dts/sun8i-h3-nanopi-m1.dts > @@ -55,6 +55,17 @@ > status = "okay"; > }; > > +&emac { > + phy = <&phy1>; > + phy-mode = "mii"; > + allwinner,use-internal-phy; > + allwinner,leds-active-low; > + status = "okay"; > + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > +};
We usually sync Linux for dts changes and I've seen few patches on Linux, lets wait Linux to merge.
thanks!
Ok thanks, I didn't know this.
Are there also some plans to snyc the sun8i-dwmac driver?
No such plan as of now.
There's apritzel's work on this in this branch:
OK, thanks for the info
thanks!
How shoud we proceed with this patch series?
My linux mainline patches were rejected since the dwmac-sun8i bindings have not stabilized yet: http://www.spinics.net/lists/kernel/msg2592861.html
You should wait until the bindings have stabilized, then resync the dts files from Linux to U-boot, and fix up the driver to support the new bindings.
ChenYu