Dear all,

       We are having a MPC8280 based Rattler board with ethernet configured on FCC1. We are writing some POST tests for the board. For Ethernet we thought of running an internal loopback test.

       We took the eth_loopback_test() in ether_fcc.c as the template and did the necessary modification(s) majorly it was to change the mode register. We are able to see that the initialization of FCC1 is happening properly. But the result printed always says that the transmitted packet is 0 and received packet is 0. Is there something we are missing ? Expecting your help.

With Thanks and Best Regards,
C.R.Srivatsan