Jagan,
On 09.05.2019, at 14:36, Jagan Teki jagan@amarulasolutions.com wrote:
On Thu, May 9, 2019 at 6:01 PM Paul Kocialkowski <paul.kocialkowski@bootlin.com mailto:paul.kocialkowski@bootlin.com> wrote:
Hi,
On Thu, 2019-05-09 at 16:15 +0530, Jagan Teki wrote:
Hi Paul,
On Thu, May 9, 2019 at 12:38 PM Paul Kocialkowski paul.kocialkowski@bootlin.com wrote:
Hi,
On Wed, 2019-05-08 at 11:11 +0530, Jagan Teki wrote:
(Sorry for the noice, I have missed to send two patches from v7)
This is v7 resend patchset for New rk3399 boards support wrt previous version[1]
Unfortunately initial version of creating rk3399-u-boot.dtsi and orangepi rk3399 changes are merged, so this is rework on top of u-boot-rockchip/master.
Overall this series add support below rk3399 boards
- NanoPI M4
- NanoPC T4
- NanoPI NEO4
- Orangepi RK3399
- Rock PI 4
- Rockpro64
All the respective dts(i) files are synced from Linux 5.1-rc2 and few dts(i) from linux-next.
SoC u-boot specific dtsi rk3399-u-boot.dtsi changes are part of another series [3].
Out of all above boards Rockpor64, Rock-PI and Nanopi NEO4 would support booting via Rockchip miniloader as of now.
Could you send these two boards in a separate series so that we avoid merging them for now (because SPL support is broken) and then re- iterate the series later with the DDR bringup? Or maybe find a way to disable SPL support, but in any case, it's not ok to merge a board with SPL enabled and broken.
I have explained the details about this concern on v2 [1], thought you would comeback on the same line instead here.
Yes, you have already explained the issue, but I don't think it's enough a justification to merge broken SPL support. If it was only partial or limited, it would be fine, but here it's just broken.
Anyway, making SPL as an optional is not an idea to go with Mainline as we make many decisions with regards to make SPL is mandatory.
Yes I think making SPL mandatory is a good idea, so that's why I'm suggesting that we don't merge the boards until they have SPL support.
Since the DDR is show stopper here (and it would really need a good amount of time, since it effect the other boards), I can go with TPL enabled boot-chain where ddr bin, SPL and U-Boot proper can be part of booting stages. This way we can avoid skipping SPL usage, and many config changes to make SPL optional.
Honestly I don't really see the point of merging these boards at all if they don't have SPL support. People who really want to use them with the rockchip blob can cherry-pick the patches from the list in the meantime.
It also creates incentive for people to free the DDR init, since that becomes a condition to have the board upstream.
What do you think?
I don't know whether you get my point or not? these boards are not merged yet. What I'm saying is we are going to support them with TPL-enabled, that was SPL can make use of these boards which still a valid boot-chain. moreover this way can avoid touching core files and no specific change require while supporting ddr dtsi.
On some boards, there will be no TPL and only a SPL stage that will initialise DRAM (as the move to having TPL on the RK3399 is optional).
I agree with Paul that the DRAM init should be part of U-Boot whenever we add new boards and make an open DRAM init a prerequisite.
Thanks, Philipp.