On 11/9/22 18:30, Andrew Davis wrote:
- BASH code should be labeled as such.
- Code blocks should be indented by 4 spaces.
Fix these here.
Suggested-by: Heinrich Schuchardt xypron.glpk@gmx.de Signed-off-by: Andrew Davis afd@ti.com
Reviewed-by: Heinrich Schuchardt xypron.glpk@gmx.de
Changes from v2:
- None
Changes from v1:
- New patch with fixes suggested by Heinrich
doc/board/ti/j721e_evm.rst | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst index 8608373365..ad70f15b7a 100644 --- a/doc/board/ti/j721e_evm.rst +++ b/doc/board/ti/j721e_evm.rst @@ -154,37 +154,37 @@ Build procedure:
- SYSFW:
-.. code-block:: text +.. code-block:: bash
- $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
- ATF:
-.. code-block:: text +.. code-block:: bash
- $ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
- OPTEE:
-.. code-block:: text +.. code-block:: bash
- $ make PLATFORM=k3-j721e CFG_ARM64_core=y
make PLATFORM=k3-j721e CFG_ARM64_core=y
- U-Boot:
- 4.1 R5:
-.. code-block:: text +.. code-block:: bash
- $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
- $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
- 4.2 A72:
-.. code-block:: text +.. code-block:: bash
- $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
- $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
Target Images