Hi all,
Let me first start off to wish all of you a prosperous 2012.
While browsing through the sources I noticed CONFIG_ENV_SIZE_REDUND and I am wondering if it carries any use at all. Why would the redundant env be any different in size than the original one? Seems odd to me.
A quick grep through the sources revealed that
most of the boards define it to be CONFIG_ENV_SIZE (sometimes with and sometimes without parenthesis around CONFIG_ENV_SIZE)
8 boards define it to be CONFIG_ENV_SECT_SIZE, but 7 of these also define CONFIG_ENV_SIZE to be equal to CONFIG_ENV_SECT_SIZE the weird one is quad100hd.h (whatever that may be) which says: #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) but does not define CONFIG_ENV_SIZE. Fortunately the default seems to be CONFIG_ENV_SECT_SIZE.
and 5 boards define CONFIG_ENV_SIZE_REDUND as a numerical value (e.g. 0x2000) but all identical to CONFIG_ENV_SIZE
This is as far as the configs go In the sources there exist three places where things are referenced: tools/envcrc.c says: # if !defined(CONFIG_ENV_ADDR_REDUND) && defined(CONFIG_ENV_OFFSET_REDUND) # define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET_REDUND) # endif
common/env_flash.c says: #if defined(CONFIG_ENV_SIZE_REDUND) && \ (CONFIG_ENV_SIZE_REDUND < CONFIG_ENV_SIZE) #error CONFIG_ENV_SIZE_REDUND should not be less then CONFIG_ENV_SIZE #endif
and common/env_nand.c says: #if defined(CONFIG_ENV_SIZE_REDUND) && \ (CONFIG_ENV_SIZE_REDUND != CONFIG_ENV_SIZE) #error CONFIG_ENV_SIZE_REDUND should be the same as CONFIG_ENV_SIZE #endif
and finally there is ./include/environment.h which says # if defined(CONFIG_ENV_ADDR_REDUND) && !defined(CONFIG_ENV_SIZE_REDUND) # define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE # endif
I could not find any place where the value is actually used!
Is it meaningful to keep this around? Shouldn't we just remove it ?
Best regards, Frans.