Fix style violations in the MPC83xx SPD-SDRAM code and make the code more readable.
Signed-off-by: Mario Six mario.six@gdsys.cc ---
v1 -> v2: None
--- arch/powerpc/cpu/mpc83xx/spd_sdram.c | 49 ++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/cpu/mpc83xx/spd_sdram.c b/arch/powerpc/cpu/mpc83xx/spd_sdram.c index d945ab7ee4..aa77d9bb7a 100644 --- a/arch/powerpc/cpu/mpc83xx/spd_sdram.c +++ b/arch/powerpc/cpu/mpc83xx/spd_sdram.c @@ -172,11 +172,10 @@ long int spd_sdram() }
/* Check the number of physical bank */ - if (spd.mem_type == SPD_MEMTYPE_DDR) { + if (spd.mem_type == SPD_MEMTYPE_DDR) n_ranks = spd.nrows; - } else { + else n_ranks = (spd.nrows & 0x7) + 1; - }
if (n_ranks > 2) { printf("DDR: The number of physical bank is %02X\n", n_ranks); @@ -201,10 +200,9 @@ long int spd_sdram() /* * Adjust DDR II IO voltage biasing. It just makes it work. */ - if(spd.mem_type == SPD_MEMTYPE_DDR2) { + if (spd.mem_type == SPD_MEMTYPE_DDR2) immap->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; - } - udelay(50000); + mdelay(50); #endif
/* @@ -212,14 +210,13 @@ long int spd_sdram() */ odt_rd_cfg = 0; /* Never assert ODT */ odt_wr_cfg = 0; /* Never assert ODT */ - if (spd.mem_type == SPD_MEMTYPE_DDR2) { + if (spd.mem_type == SPD_MEMTYPE_DDR2) odt_wr_cfg = 1; /* Assert ODT on writes to CSn */ - }
/* Setup DDR chip select register */ #ifdef CONFIG_SYS_83XX_DDR_USES_CS0 ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1; - ddr->cs_config[0] = (1 << 31 + ddr->cs_config[0] = (BIT(31) | (odt_rd_cfg << 20) | (odt_wr_cfg << 16) | ((spd.nbanks == 8 ? 1 : 0) << 14) @@ -232,7 +229,7 @@ long int spd_sdram() if (n_ranks == 2) { ddr->csbnds[1].csbnds = ((banksize(spd.row_dens) >> 8) | ((banksize(spd.row_dens) >> 23) - 1)); - ddr->cs_config[1] = (1 << 31 + ddr->cs_config[1] = (BIT(31) | (odt_rd_cfg << 20) | (odt_wr_cfg << 16) | ((spd.nbanks == 8 ? 1 : 0) << 14) @@ -244,7 +241,7 @@ long int spd_sdram()
#else ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1; - ddr->cs_config[2] = (1 << 31 + ddr->cs_config[2] = (BIT(31) | (odt_rd_cfg << 20) | (odt_wr_cfg << 16) | ((spd.nbanks == 8 ? 1 : 0) << 14) @@ -257,7 +254,7 @@ long int spd_sdram() if (n_ranks == 2) { ddr->csbnds[3].csbnds = ((banksize(spd.row_dens) >> 8) | ((banksize(spd.row_dens) >> 23) - 1)); - ddr->cs_config[3] = (1 << 31 + ddr->cs_config[3] = (BIT(31) | (odt_rd_cfg << 20) | (odt_wr_cfg << 16) | ((spd.nbanks == 8 ? 1 : 0) << 14) @@ -445,11 +442,10 @@ long int spd_sdram() * Convert caslat clocks to DDR controller value. * Force caslat_ctrl to be DDR Controller field-sized. */ - if (spd.mem_type == SPD_MEMTYPE_DDR) { + if (spd.mem_type == SPD_MEMTYPE_DDR) caslat_ctrl = (caslat + 1) & 0x07; - } else { + else caslat_ctrl = (2 * caslat - 1) & 0x0f; - }
debug("DDR: effective data rate is %d MHz\n", effective_data_rate); debug("DDR: caslat SPD bit is %d, controller field is 0x%x\n", @@ -547,13 +543,12 @@ long int spd_sdram() * add_lat + caslat must be >= 4 */ add_lat = 0; - if (spd.mem_type == SPD_MEMTYPE_DDR2 - && (odt_wr_cfg || odt_rd_cfg) - && (caslat < 4)) { + if (spd.mem_type == SPD_MEMTYPE_DDR2 && + (odt_wr_cfg || odt_rd_cfg) && + caslat < 4) { add_lat = 4 - caslat; - if ((add_lat + caslat) < 4) { + if ((add_lat + caslat) < 4) add_lat = 0; - } }
/* @@ -652,7 +647,7 @@ long int spd_sdram() debug(" without ECC\n");
/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus, - Burst type is sequential + * Burst type is sequential */ if (spd.mem_type == SPD_MEMTYPE_DDR) { switch (caslat) { @@ -685,9 +680,9 @@ long int spd_sdram()
ddr->sdram_mode = (0 - | (1 << (16 + 10)) /* DQS Differential disable */ + | BIT(16 + 10) /* DQS Differential disable */ #ifdef CONFIG_SYS_DDR_MODE_WEAK - | (1 << (16 + 1)) /* weak driver (~60%) */ + | BIT(16 + 1) /* weak driver (~60%) */ #endif | (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */ | (mode_odt_enable << 16) /* ODT Enable in EMRS1 */ @@ -746,9 +741,8 @@ long int spd_sdram() */ odt_cfg = 0; #ifndef CONFIG_NEVER_ASSERT_ODT_TO_CPU - if (odt_rd_cfg | odt_wr_cfg) { + if (odt_rd_cfg | odt_wr_cfg) odt_cfg = 0x2; /* ODT to IOs during reads */ - } #endif if (spd.mem_type == SPD_MEMTYPE_DDR2) { ddr->sdram_cfg2 = (0 @@ -816,7 +810,8 @@ long int spd_sdram() /* disable error detection */ ddr->err_disable = ~ECC_ERROR_ENABLE; /* set single bit error threshold to maximum value, - * reset counter to zero */ + * reset counter to zero + */ ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) | (0 << ECC_ERROR_MAN_SBEC_SHIFT); } @@ -847,7 +842,7 @@ long int spd_sdram() * Use timebase counter, get_timer() is not available * at this point of initialization yet. */ -static __inline__ unsigned long get_tbms (void) +static inline unsigned long get_tbms (void) { unsigned long tbl; unsigned long tbu1, tbu2; -- 2.13.6