On Thu, 4 Sep 2008 10:09:57 -0500 Scott wrote:
On Thu, Sep 04, 2008 at 02:04:42PM +0200, Pedro Luis D. L. wrote:
It seems to me that U-boot is trying to boot from RAMDisk instead of booting the kernel, but I'm not sure. The same kernel is working properly on a phytec board and 1.2.0 U-boot, so it's not a problem with jffs2 support within the kernel. Any hint how to boot from jffs2 filesystem? The example in U-Boot documentation doesn't use oftree and so, bootm ${kernel_addr} is used, but TQM5200 requieres FDT description to boot linux as you'll know. Maybe should I compile the U-boot using some CONFIG_ parameter?
Sounds like maybe you're trying to pass the FDT address as the second bootm parameter? It needs to be the third parameter, and you pass - as the second parameter if there's no initrd.
I've already tried with: - bootm ${kernel_addr} - ${fdt_addr} - bootm ${kernel_addr} ${fdt_addr} - bootm ${kernel_addr} ${jffs2_addr} ${fdt_addr} - bootm ${kernel_addr} ${fdt_addr} ${jffs2_addr}
And always with the same result...
Pedro.
-Scott
_________________________________________________________________ ¿Sigue el calor? Consulta MSN El tiempo http://eltiempo.es.msn.com/