Re: [U-Boot] [PATCH] mmc: set bus width to 1 and clock to minimum early during initialization

Dear Ilya Yanok,

In message 1246283596-1259-1-git-send-email-yanok@emcraft.com you wrote:

We need to switch back to 1-bit before initialization or SD 2.0 cards will fail to send SCR if we've switched to 4-bit already.

Signed-off-by: Ilya Yanok yanok@emcraft.com

drivers/mmc/mmc.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk