On 23/09/2017 04:45, Fabio Estevam wrote:
From: Fabio Estevam fabio.estevam@nxp.com
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper.
Reported-by: Stefano Babic sbabic@denx.de Signed-off-by: Fabio Estevam fabio.estevam@nxp.com
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c index 2ed66d3..d42cc94 100644 --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c +++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c @@ -683,8 +683,6 @@ int overwrite_console(void) int board_early_init_f(void) { setup_iomux_uart();
- setup_display();
#ifdef CONFIG_MXC_SPI setup_spi(); #endif @@ -702,6 +700,8 @@ int board_init(void) else setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
- setup_display();
#ifdef CONFIG_SATA setup_sata(); #endif
Reviewed-by: Stefano Babic sbabic@denx.de
Best regards, Stefano Babic