Re: [U-Boot] qemu and baremetal arm prog

Dear Anupam,

In message CAEmaDyHtO=2+jZXLa=afZ6+oyxvndaRAbhfL-SSJhHV-kmzmyQ@mail.gmail.com you wrote:

printf "bootm 0x%X\n" $(expr $(stat -c%s u-boot.bin) + 65536)
bootm 0x218F20

The value 0x218F20 printed here is the offset where your image starts relative to the begin of the U-Boot binary.

**Then run :**

qemu-system-arm -M vexpress-a9 -kernel flash.bin -m 128M -nographic

Interrupted it and then run `bootm 0x218F20` But it says

Wrong Image Format for bootm command
ERROR: can't get kernel image!

This can only be correct if your U-Boot binary was loaded to address 0x0000, which probably is not correct.

Best regards,

Wolfgang Denk