On Mon, Nov 6, 2017 at 1:40 PM, Jagan Teki jagannadh.teki@gmail.com wrote:
On Fri, Nov 3, 2017 at 10:00 PM, Maxime Ripard maxime.ripard@free-electrons.com wrote:
On Fri, Nov 03, 2017 at 02:21:51PM +0530, Jagan Teki wrote:
On Thu, Nov 2, 2017 at 7:26 PM, Maxime Ripard maxime.ripard@free-electrons.com wrote:
On Wed, Nov 01, 2017 at 08:31:46AM +0800, Icenowy Zheng wrote:
在 2017-10-31 21:54，Maxime Ripard 写道：
On Tue, Oct 31, 2017 at 04:05:36PM +0800, icenowy@aosc.io wrote: > 在 2017-10-31 15:57，Jagan Teki 写道： > > On Tue, Oct 31, 2017 at 5:06 AM, Icenowy Zheng icenowy@aosc.io wrote: > > > Some H5 boards are designed to start at 1.1V CPUx voltage (e.g. Nano > > > Pi > > > NEO2), which may not work properly at 1008MHz if the chip's quality is > > > not so good. > > > > > > Lower the default CPUx frequency of H5 to 816MHz. > > > > > > Signed-off-by: Icenowy Zheng icenowy@aosc.io > > > --- > > > arch/arm/mach-sunxi/Kconfig | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig > > > index 09cfec6f57..1fededd0a3 100644 > > > --- a/arch/arm/mach-sunxi/Kconfig > > > +++ b/arch/arm/mach-sunxi/Kconfig > > > @@ -397,9 +397,9 @@ config SYS_CLK_FREQ > > > default 1008000000 if MACH_SUN5I > > > default 1008000000 if MACH_SUN6I > > > default 912000000 if MACH_SUN7I > > > + default 816000000 if MACH_SUN50I || MACH_SUN50I_H5 > > > default 1008000000 if MACH_SUN8I
Applied to u-boot-sunxi/master