On 11/05/2010 04:07 PM, Joakim Tjernlund wrote:
Andre Schwarzandre.schwarz@matrix-vision.de wrote on 2010/11/05 15:51:13:
Jocke,
sorry to bother you again, but it might relate to our last discussion.
Actually my MPC8377 based board is up and running with basic functionality. Now I'm trying to add USB support - but as soon as CONFIG_USB_EHCI_FSL is defined serial line is pretty dead again.
Perhaps USB becomes the console in this case and that is why you don't see anything?
Hmm - how can this happen ?
I have ...
#define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
#define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
#define CONFIG_CONSOLE ttyS0 #define CONFIG_BAUDRATE 115200
... like on any other MPC83xx based board.
Have I missed something else ?
Regards, André
MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner